
	Value	Units	Test Method / Conditions
Charpy Impact Strength (at 23°C)	N/N	kJ/m²	ISO 179/1eU
Rockwell Hardness	114/108	Scale R	ISO 2039-2
Charpy Impact Strength (at -30°C)	N/N	kJ/m²	ISO 179/1eU
Charpy Notched Impact Strength (at 23°C)	4.2/8	kJ/m²	ISO 179/1eA
Charpy Notched Impact Strength (at -30°C)	4.2/4	kJ/m²	ISO 179/1eA
Izod Notched Impact Strength (at 23°C)	4-6	kJ/m²	ISO 180/1A
Izod Notched Impact Strength (at -30°C)	5/4.5	kJ/m²	ISO 180/1A
Nominal Strain at Break	35/min. 50	%	ISO 527-1/-2
Poisson's Ratio	0.38/0.43	-	-
Tensile Modulus	2400/1500	MPa	ISO 527-1/-2
Yield Strain	4.3/19	%	ISO 527-1/-2
Yield Stress	62/52	MPa	ISO 527-1/-2

Physical Properties


	Value	Units	Test Method / Conditions
Mold Shrinkage, Flow, 3.2mm (0.125in)	1.1/*	%	-
Mold Shrinkage, Transverse, 3.2mm (0.125in)	1.1/*	%	-
Moulding Shrinkage (Normal)	1.5/-	%	ISO 294-4, 2577
Moulding Shrinkage (Parallel)	1.5/-	%	ISO 294-4, 2577
Viscosity Number	120/*	cm³/g	ISO 307, 1157, 1628

Thermal Properties


	Value	Units	Test Method / Conditions
Coefficient of Linear Thermal Expansion (Normal)	120/*	E-6/K	ISO 11359-1/-2
Coefficient of Linear Thermal Expansion (Parallel)	120/*	E-6/K	ISO 11359-1/-2
Glass Transition Temperature (10°C/min)	60/45	°C	ISO 11357-1/-2
Melting Temperature (10°C/min)	218/*	°C	ISO 11357-1/-3
Relative Temperature Index, Electrical (0.75mm)	105.0	°C	UL 746B
Relative Temperature Index, Electrical (1.5mm)	105.0	°C	UL 746B
Relative Temperature Index, Electrical (3mm)	105.0	°C	UL 746B
Relative Temperature Index, Impact (0.75mm)	65.0	°C	UL 746B
Relative Temperature Index, Impact (1.5mm)	65.0	°C	UL 746B
Relative Temperature Index, Impact (3mm)	65.0	°C	UL 746B
Relative Temperature Index, Strength (0.75mm)	65.0	°C	UL 746B
Relative Temperature Index, Strength (1.5mm)	65/*	°C	UL 746B
Relative Temperature Index, Strength (3mm)	65.0	°C	UL 746B
Specific Heat Capacity of Melt	2800.0	J/(kg K)	-
Temperature of Deflection Under Load (0.45 MPa)	135/*	°C	ISO 75-1/-2
Temperature of Deflection Under Load (1.8 MPa)	62/*	°C	ISO 75-1/-2
Thermal Conductivity of Melt	0.19	W/(m K)	-
Vicat Softening Temperature (50°C/h, 50N)	180/*	°C	ISO 306

Film Properties


	Value	Units	Test Method / Conditions
Strain at Yield (Parallel)	4.3/*	%	ISO 527-3

Electrical Properties


	Value	Units	Test Method / Conditions
Dissipation Factor (100Hz)	140/1500	E-4	IEC 62631-2-1
Dissipation Factor (1MHz)	165/1000	E-4	IEC 62631-2-1
Electric Strength	36/36	kV/mm	IEC 60243-1
Relative Permittivity (100Hz)	3.6/6	-	IEC 62631-2-1
Relative Permittivity (1MHz)	3.2/4	-	IEC 62631-2-1
Surface Resistivity	*/1E12	Ohm	IEC 62631-3-2
Volume Resistivity	>1E13/1E11	Ohm*m	IEC 62631-3-1

Flammability


	Value	Units	Test Method / Conditions
Burning Behaviour (at 1.5mm nominal thickness)	HB/*	class	IEC 60695-11-10
Burning Behaviour (at Thickness h)	HB/*	class	IEC 60695-11-10
Burning Rate (Thickness 1 mm)	max. 80	mm/min	ISO 3795 (FMVSS 302)
FMVSS Class	B	-	ISO 3795 (FMVSS 302)
Oxygen Index	25/*	%	ISO 4589-1/-2
Thickness Tested	1.5/*	mm	IEC 60695-11-10
Thickness Tested	0.86/*	mm	IEC 60695-11-10
UL Recognition	yes/*	-	UL 94

Other Properties


	Value	Units	Test Method / Conditions
Density	1060/-	kg/m³	ISO 1183
Density of Melt	900.0	kg/m³	-
Humidity Absorption (2mm)	1.3/*	%	Sim. to ISO 62
Water Absorption (2mm)	3/*	%	Sim. to ISO 62

Processing Information (Extrusion)


	Value	Units	Test Method / Conditions
Drying Temperature	75 - 80	°C	-
Drying Time (Dehumidified Dryer)	3-4	h	-
Melt Temperature Optimum	240.0	°C	-
Melt Temperature Range	235 - 250	°C	-
Processing Moisture Content	≤0.06	%	-

Processing Information (Injection Molding)


	Value	Units	Test Method / Conditions
Drying Recommended	yes	-	-
Drying Time (Dehumidified Dryer)	2-4	h	-
Maximum Melt Temperature	290.0	°C	-
Maximum Mould Temperature	90.0	°C	-
Melt Temperature Optimum	250.0	°C	-
Minimum Melt Temperature	230.0	°C	-
Minimum Mould Temperature	50.0	°C	-
Processing Moisture Content	≤0.15	%	-

VDA Properties


	Value	Units	Test Method / Conditions
Emission of Organic Compounds	27.0	µgC/g	VDA 277
Odor	4.0	class	VDA 270

Chemical Media Resistance

Chemical Type	Chemical Name	Resistance
Acids	Acetic Acid (5% by mass), 23°C	Possibly Resistant
Acids	Citric Acid solution (10% by mass), 23°C	Possibly Resistant
Acids	Lactic Acid (10% by mass), 23°C	Possibly Resistant
Acids	Hydrochloric Acid (36% by mass), 23°C	Not Recommended
Acids	Nitric Acid (40% by mass), 23°C	Not Recommended
Acids	Sulfuric Acid (38% by mass), 23°C	Not Recommended
Acids	Sulfuric Acid (5% by mass), 23°C	Not Recommended
Acids	Chromic Acid solution (40% by mass), 23°C	Not Recommended
Bases	Sodium Hydroxide solution (35% by mass), 23°C	Not Recommended
Bases	Sodium Hydroxide solution (1% by mass), 23°C	Possibly Resistant
Bases	Ammonium Hydroxide solution (10% by mass), 23°C	Possibly Resistant
Alcohols	Isopropyl alcohol, 23°C	Possibly Resistant
Alcohols	Methanol, 23°C	Possibly Resistant
Alcohols	Ethanol, 23°C	Possibly Resistant
Hydrocarbons	n-Hexane, 23°C	Possibly Resistant
Hydrocarbons	Toluene, 23°C	Possibly Resistant
Hydrocarbons	iso-Octane, 23°C	Possibly Resistant
Ketones	Acetone, 23°C	Possibly Resistant
Ethers	Diethyl ether, 23°C	Possibly Resistant
Mineral Oils	SAE 10W40 multigrade motor oil, 23°C	Not Recommended
Mineral Oils	SAE 10W40 multigrade motor oil, 130°C	Not Recommended
Mineral Oils	SAE 80/90 hypoid-gear oil, 130°C	Not Recommended
Mineral Oils	Insulating Oil, 23°C	Possibly Resistant
Standard Fuels	ISO 1817 Liquid 1 - E5, 60°C	Possibly Resistant
Standard Fuels	ISO 1817 Liquid 2 - M15E4, 60°C	Possibly Resistant
Standard Fuels	ISO 1817 Liquid 3 - M3E7, 60°C	Possibly Resistant
Standard Fuels	ISO 1817 Liquid 4 - M15, 60°C	Possibly Resistant
Standard Fuels	Standard fuel without alcohol (pref. ISO 1817 Liquid C), 23°C	Possibly Resistant
Standard Fuels	Standard fuel with alcohol (pref. ISO 1817 Liquid 4), 23°C	Possibly Resistant
Standard Fuels	Diesel fuel (pref. ISO 1817 Liquid F), 23°C	Possibly Resistant
Standard Fuels	Diesel fuel (pref. ISO 1817 Liquid F), 90°C	Possibly Resistant
Standard Fuels	Diesel fuel (pref. ISO 1817 Liquid F), >90°C	Not Recommended
Salt solutions	Sodium Chloride solution (10% by mass), 23°C	Possibly Resistant
Salt solutions	Sodium Hypochlorite solution (10% by mass), 23°C	Not Recommended
Salt solutions	Sodium Carbonate solution (20% by mass), 23°C	Possibly Resistant
Salt solutions	Sodium Carbonate solution (2% by mass), 23°C	Possibly Resistant
Salt solutions	Zinc Chloride solution (50% by mass), 23°C	Possibly Resistant
Other	Ethyl Acetate, 23°C	Possibly Resistant
Other	Hydrogen peroxide, 23°C	Not Recommended
Other	DOT No. 4 Brake fluid, 130°C	Not Recommended
Other	Ethylene Glycol (50% by mass) in water, 108°C	Possibly Resistant
Other	1% nonylphenoxy-polyethyleneoxy ethanol in water, 23°C	Possibly Resistant
Other	50% Oleic acid + 50% Olive Oil, 23°C	Possibly Resistant
Other	Water, 23°C	Possibly Resistant
Other	Water, 90°C	Not Recommended
Other	Phenol solution (5% by mass), 23°C	Not Recommended