Company logo

Zytel® ST801 NC010A

Sold by DuPont
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Extrusion, Injection Molding
Start Order
Secure
Order Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
View
TypeDocument Name
Brochure
Technology Profile Laser Welding
Technology Profile Laser Welding
Brochure
Other
Hot Runner Manual for Robust Molding of Semi-crystalline Resins
Hot Runner Manual for Robust Molding of Semi-crystalline Resins
Other
Technical Data Sheet
Zytel® ST801 NC010A Technical Data Sheet
Zytel® ST801 NC010A Technical Data Sheet
Technical Data Sheet
Brochure
Zytel® Plus Nylon
Zytel® Plus Nylon
Brochure
Other
Failure Analysis using Microscopic Techniques
Failure Analysis using Microscopic Techniques
Other
Other
DuPont™ Zytel® Helps Enable Safe, Long-life Service for Outdoor MV Electrical Switch Equipment
DuPont™ Zytel® Helps Enable Safe, Long-life Service for Outdoor MV Electrical Switch Equipment
Other
Other
Structural and Fatigue Performance
Structural and Fatigue Performance
Other
Brochure
DuPont Performance Polymers - Self Tapping Screws
DuPont Performance Polymers - Self Tapping Screws
Brochure
Other
Minlon® and Zytel® Design Information - Module II
Minlon® and Zytel® Design Information - Module II
Other
Other
Zytel® ST801 NC010A Injection Molding Guide
Zytel® ST801 NC010A Injection Molding Guide
Other
Other
Zytel® ST801 NC010A SVHC Declaration
Zytel® ST801 NC010A SVHC Declaration
Other
Other
Zytel® ST801 NC010A Regulatory Information Sheet
Zytel® ST801 NC010A Regulatory Information Sheet
Other

Knowde Enhanced TDS

Expand All

+

Identification & Functionality

Chemical Family
Plastics & Elastomers Functions
Technologies

Zytel® ST801 NC010A Features & Benefits

Applications & Uses

Plastics & Elastomers Processing Methods

Properties

Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Modulus2000/900MPaISO 527-1/-2
Yield Stress50/43MPaISO 527-1/-2
Yield Strain5.7/37%ISO 527-1/-2
Nominal Strain (at Break)32/min. 50%ISO 527-1/-2
Flexural Stress (at 3.5%)55/-MPaISO 178
Tensile Creep Modulus (1h)*/1200MPaISO 899-1
Tensile Creep Modulus (1000h)*/750MPaISO 899-1
Charpy Impact Strength (at 23°C)N/NkJ/m²ISO 179/1eU
Ball Indentation Hardness (H 358/30)104/-MPaISO 2039-1
Charpy Impact Strength (at -30°C)N/NkJ/m²ISO 179/1eU
Poisson's Ratio0.4/0.45--
Notched Charpy Impact Strength (at 23°C)80/115kJ/m²ISO 179/1eA
Notched Charpy Impact Strength (at -30°C)18/17kJ/m²ISO 179/1eA
Notched Charpy Impact Strength (at -40°C)-/15kJ/m²ISO 179/1eA
Notched Izod Impact Strength (at 23°C)80/100kJ/m²ISO 180/1A
Notched Izod Impact Strength (at -30°C)19/19kJ/m²ISO 180/1A
Notched Izod Impact Strength (at -40°C)14/14kJ/m²ISO 180/1A
Typical Properties
ValueUnitsTest Method / Conditions
Resin IdentificationPA66-HI-ISO 1043
ISO DesignationISO 16396-PA66-I,,M1G1L1NR,S14-020--
Thermal Properties
ValueUnitsTest Method / Conditions
Melt Temperature (at 10°C/min)263/*°CISO 11357-1/-3
Glass Transition Temperature (at 10°C/min)75/20°CISO 11357-1/-2
Temperature of Deflection Under Load (1.8 Mpa)64/*°CISO 75-1/-2
Temperature of Deflection Under Load (0.45 Mpa)132/*°CISO 75-1/-2
Coefficient of Linear Thermal Expansion (Parallel)120/*E-6/KISO 11359-1/-2
Coefficient of Linear Thermal Expansion (Normal)90/*E-6/KISO 11359-1/-2
Relative Thermal Index (Electrical, 0.75mm)125°CUL 746B
Relative Thermal Index (Electrical, 1.5mm)125°CUL 746B
Relative Thermal Index (Electrical, 3mm)125°CUL 746B
Relative Thermal Index (Impact, 0.75mm)75°CUL 746B
Relative Thermal Index (Impact, 1.5mm)75°CUL 746B
Relative Thermal Index (Impact, 3mm)75°CUL 746B
Relative Thermal Index (Strength, 0.75mm)85°CUL 746B
Relative Thermal Index (Strength, 1.5mm)85/*°CUL 746B
Relative Thermal Index (Strength, 3mm)85°CUL 746B
Electrical Properties
ValueUnitsTest Method / Conditions
Surface Resistivity*/min. 1E15OhmIEC 62631-3-2
Electric Strength31/-kV/mmIEC 60243-1
Relative Permittivity (at 100Hz)3.2/8-IEC 62631-2-1
Relative Permittivity (at 1MHz)2.9/3.6-IEC 62631-2-1
Dissipation Factor (at 100 Hz)80/1800E-4IEC 62631-2-1
Dissipation Factor (at 1 MHz)140/550E-4IEC 62631-2-1
Comparative Tracking Index600/--IEC 60112
Volume Resistivity1E13/1E11Ohm.mIEC 62631-3-1
Flammability
ValueUnitsTest Method / Conditions
Oxygen Index20/*%ISO 4589-1/-2
FMVSS ClassB-ISO 3795 (FMVSS 302)
Burning Behavior (at 1.5mm/* Nominal Thickness)UL94 HB/*classIEC 60695-11-10
Burning Behavior (at 0.81mm/* Thickness h)UL94 HB/*classIEC 60695-11-10
Glow Wire Flammability Index (at 0.75mm)750/-°CIEC 60695-2-12
Glow Wire Flammability Index (at 1.5mm)750/-°CIEC 60695-2-12
Glow Wire Flammability Index (at 3mm)750/-°CIEC 60695-2-12
Glow Wire Ignition Temperature (at 0.75mm)725/-°CIEC 60695-2-13
Glow Wire Ignition Temperature (at 1.5mm)725/-°CIEC 60695-2-13
Glow Wire Ignition Temperature (at 3mm)725/-°CIEC 60695-2-13
Glow Wire Temperature (at 0.75mm, No Flame)700/-°CIEC 60335-1
Glow Wire Temperature (at 1mm, No Flame)700/-°CIEC 60335-1
Glow Wire Temperature (at 1.5mm, No Flame)700/-°CIEC 60335-1
Glow Wire Temperature (at 2mm, No Flame)700/-°CIEC 60335-1
Glow Wire Temperature (at 3mm, No Flame)700/-°CIEC 60335-1
Burning Rate (at 1mm Thickness)26mm/minISO 3795 (FMVSS 302)
Other Properties
ValueUnitsTest Method / Conditions
Humidity Absorption (at 2mm)2/*%Sim. to ISO 62
Water Absorption (at 2mm)6.5/*%Sim. to ISO 62
Density1080/-kg/m³ISO 1183
Processing Information (Extrusion)
ValueUnitsTest Method / Conditions
Drying Temperature80°C-
Drying Time (Dehumidified Dryer)3 - 4h-
Processing Moisture Contentmax. 0.06%-
Melt Temperature (Optimum)280°C-
Melt Temperature Range275 - 290°C-
VDA Properties
ValueUnitsTest Method / Conditions
Emission of Organic Compounds38.4µgC/gVDA 277
Odor3classVDA 270
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Drying Recommendedyes--
Drying Temperature80°C-
Drying Time (Dehumidified Dryer)2 - 4h-
Processing Moisture Contentmax. 0.2%-
Hold Pressure Range50 - 100MPa-
Hold Pressure Time4s/mm-
Ejection Temperature190°C-
Melt Temperature (Optimum)290°C-
Melt Temperature (Minimum)280°C-
Melt Temperature (Maximum)300°C-
Maximum Screw Tangential Speed0.3m/s-
Mold Temperature (Optimum)80°C-
Mold Temperature (Minimum)50°C-
Mold Temperature (Maximum)100°C-
Rheological Properties
ValueUnitsTest Method / Conditions
Mold Shrinkage (Parallel)1.8/-%ISO 294-4, 2577
Mold Shrinkage (Normal)1.4/-%ISO 294-4, 2577
Post Mold Shrinkage (Normal, 48h at 80°C)0.05/*%ISO 294-4
Post Mold Shrinkage (Parallel, 48h at 80°C)0/*%ISO 294-4
Chemical Resistance
Chemical Type Chemical Name Resistance
Acids Acetic Acid (5% by mass) (23°C) Probably Resistant
Acids Chromic Acid solution (40% by mass) (23°C) Not Recommended
Acids Citric Acid solution (10% by mass) (23°C) Probably Resistant
Acids Hydrochloric Acid (36% by mass) (23°C) Not Recommended
Acids Lactic Acid (10% by mass) (23°C) Probably Resistant
Acids Nitric Acid (40% by mass) (23°C) Not Recommended
Acids Sulfuric Acid (38% by mass) (23°C) Not Recommended
Acids Sulfuric Acid (5% by mass) (23°C) Not Recommended
Alcohols Ethanol (23°C) Probably Resistant
Alcohols Isopropyl alcohol (23°C) Probably Resistant
Alcohols Methanol (23°C) Probably Resistant
Bases Ammonium Hydroxide solution (10% by mass) (23°C) Probably Resistant
Bases Sodium Hydroxide solution (1% by mass) (23°C) Probably Resistant
Bases Sodium Hydroxide solution (35% by mass) (23°C) Not Recommended
Ethers Diethyl ether (23°C) Probably Resistant
Hydrocarbons iso-Octane (23°C) Probably Resistant
Hydrocarbons n-Hexane (23°C) Probably Resistant
Hydrocarbons Toluene (23°C) Probably Resistant
Ketones Acetone (23°C) Probably Resistant
Mineral oils Insulating Oil (23°C) Probably Resistant
Mineral oils SAE 10W40 multigrade motor oil (130°C) Not Recommended
Mineral oils SAE 10W40 multigrade motor oil (23°C) Probably Resistant
Mineral oils SAE 80/90 hypoid-gear oil (130°C) Not Recommended
Other 1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C) Probably Resistant
Other 50% Oleic acid + 50% Olive Oil (23°C) Probably Resistant
Other DOT No. 4 Brake fluid (130°C) Not Recommended
Other Ethyl Acetate (23°C) Probably Resistant
Other Ethylene Glycol (50% by mass) in water (108°C) Not Recommended
Other Hydrogen peroxide (23°C) Not Recommended
Other Phenol solution (5% by mass) (23°C) Not Recommended
Other Water (23°C) Probably Resistant
Other Water (90°C) Probably Resistant
Salt solutions Sodium Carbonate solution (2% by mass) (23°C) Probably Resistant
Salt solutions Sodium Carbonate solution (20% by mass) (23°C) Probably Resistant
Salt solutions Sodium Chloride solution (10% by mass) (23°C) Probably Resistant
Salt solutions Sodium Hypochlorite solution (10% by mass) (23°C) Not Recommended
Salt solutions Zinc Chloride solution (50% by mass) (23°C) Not Recommended
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (>90°C) Not Recommended
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (23°C) Probably Resistant
Standard Fuels Diesel fuel (pref. ISO 1817 Liquid F) (90°C) Not Recommended
Standard Fuels ISO 1817 Liquid 1 - E5 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 2 - M15E4 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 3 - M3E7 (60°C) Probably Resistant
Standard Fuels ISO 1817 Liquid 4 - M15 (60°C) Probably Resistant
Standard Fuels Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C) Probably Resistant
Standard Fuels Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C) Probably Resistant

Regulatory & Compliance

Certifications & Compliance

Technical Details & Test Data

Dynamic Shear Modulus vs Temperature (Dry)

DuPont Zytel ST801 NC010A Dynamic Shear Modulus vs Temperature (Dry)

Stress vs Strain (Isochronous, 23°C, Cond)

DuPont Zytel ST801 NC010A Stress vs Strain (Isochronous, 23°C, Cond)

Creep Modulus vs Time (23°C, Cond.)

DuPont Zytel ST801 NC010A Creep Modulus vs Time (23°C, Cond.)

Tensile Modulus vs Temperature (Cond.)

DuPont Zytel ST801 NC010A Tensile Modulus vs Temperature (Cond.)

Tensile Modulus vs Temperature (Dry)

DuPont Zytel ST801 NC010A Tensile Modulus vs Temperature (Dry)

Packaging & Availability

Regional Availability

Zytel® ST801 NC010A
DuPont