Company logo
producer
DuPont
Search:
59 products found for Industrial & Assembly Adhesives in Adhesives & Sealants
With TDS
With SDS

59 products found for Industrial & Assembly Adhesives in Adhesives & Sealants

Thixon® P-11-ef product card banner
PRODUCT

THIXON

THIXON® P-11-EF

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® P-11-EF is a vulcanizing adhesive primer used with all MEGUM® or THIXON® cover coat adhesives for bondingmost elastomers to various substrates. It can also be used as a one coat for bonding polar elastomers and will bondmetal substrates including hot and cold rolled steel, stainless steel alloys, brass, aluminum and zinc plated metals. It is a very good general use primer coat for rubber to metal applications. Providing excellent boiling water and salt spray resistance.

Thixon® Osn-2-ef product card banner
PRODUCT

THIXON

THIXON® OSN-2-EF

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® OSN-2-EF is a general purpose one-coat adhesive used for bonding various elastomers to metals, such as hot and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals._x005F THIXON® OSN-2-EF bonds Natural Rubber (NR), Polybutadiene (BR), Polyisoprene (IR), Styrene Butadiene Rubber (SBR), Chloroprene (CR) and Polyacrylate (ACM)._x005F THIXON® OSN-2-EF is also used for post-vulcanization bonding. In addition, THIXON® OSN-2-EF bonds rubber to synthetic fibers such as rayon and polyester. It is a good general purpose rubber to substrate bonding agent that can be used as single coat or two coat system. The use of a ROBOND, THIXON® or MEGUM® primer or a two coat system will provide the best environmental resistance, however THIXON® OSN-2-EF does quite well as a stand alone coating in many general rubber to metal bonding situations.

Betaseal® 1766 Eu product card banner
PRODUCT

BETASEAL

BETASEAL® 1766 EU

Applications: Body Shop & Repair, Transportation Assembly, Electronics Adhesives

Product Families: Sealants, Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1766 EU is a high viscosity, high modulus, glass bonding adhesive that can be used primerless to paint and glass. Due to its chemistry, it delivers a high initial handling strength to hold the position of the bonded parts. It is a one component, ambient moisture curing, solvent free adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension.

Thixon® 423 Clear product card banner
PRODUCT

THIXON

THIXON® 423 Clear

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® 423 Clear is a vulcanizing adhesive which can be used as a one-coat adhesive or as a covercoat adhesive overTHIXON®403/404 adhesive primer for bonding castable polyurethane to various substrates.THIXON®423 can also be used as a one-coat adhesive for bonding thermoplastic polyurethanes to metal.THIXON®423 can also be used as a protective coating for metal, polyurethane, epoxy, polyester and fiberglass compounds. it is a good one-coat system for thermoplastic urethane to metal bonding with better heat resistance thatTHIXON® 405.

Thixon® 715-Ef&b product card banner
PRODUCT

THIXON

THIXON® 715-EF&B

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® 715-EF&B by DuPont is commonly used as Bonding Adhesive for a variety of applications in Industrial and Automotive.

Thixon® 2001-Ef product card banner
PRODUCT

THIXON

THIXON® 2001-EF

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® 2001-EF is a vulcanizing adhesive that can be used as a one-coat adhesive or as a two-coat system appliedcover THIXON® P-11-EF or THIXON® P-6-EF adhesive primers. It bonds with a wide variety of elastomers, including natural rubber, SBR, chloroprene, EPDM, butyl and nitrile.THIXON® 2001-EF is formulated at the proper viscosity and solids content to give the desired dry film thickness for maximum bonding in one coat brushing or roller coat applications. It is a vulcanizing adhesive that can be used as a one-coat adhesive or as a two-coat system applied over THIXON® P-11-EF or P-6-EF adhesive primers.THIXON® 2001-EF represents the highest reactivity of any of the cover coat adhesives in our product line and is used to pick up difficult to bond rubber compounds

Thixon® P-11 product card banner
PRODUCT

THIXON

THIXON® P-11

Applications: Transportation Assembly

Product Families: Adhesives

THIXON P-11 is a solvent-based primer, used in combination with MEGUM or THIXON cover coats. THIXON P-11 can also be used as a one-coat adhesive for the bonding of polar elastomers (NBR, AEM, ACM).COMPOSITION: THIXON P-11 consists of reactive polymers and pigments in methyl isobutyl ketone (MIBK). It is formulated without reportable levels of lead or other toxic heavy metals.ENVIRONMENTAL RESISTANCE: Rubber-to-metal bonding systems using THIXON P-11 display resistance to severe environmental exposures such as humidity and corrosion. Properly prepared bonds will also resist heat, salt fog, oil and water exposures.

Thixon® 6110F product card banner
PRODUCT

THIXON

THIXON® 6110F

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® 6110F is a vulcanizing adhesive used to thermally laminate polypropylene copolymers to substrates such as metal, glass and wood. This product is a one-part dispersion and must be mixed well before and during use. Cohesive failure bonds are typical for most polypropylene copolymer materials.

Megum® 3290-1Ld product card banner
PRODUCT

MEGUM

MEGUM® 3290-1LD

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® 3290-1LD is a vulcanizing adhesive that can be used as a one-coat adhesive for the bonding of fluorocarbon rubbers to metals and other solid materials under vulcanization conditions. It is suitable for all common curing systems including bisphenolic and peroxide curing._x005F MEGUM® 3290-1LD gives an outstanding resistance to external influences and high temperatures, and may be used with all conventional vulcanization methods. It is a rubber to substrate bonding system with more aggressive cross-linking chemistry to give good environmental resistance in the finished good.

Thixon® Osn-2-ef-vv product card banner
PRODUCT

THIXON

THIXON® OSN-2-EF-VV

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® OSN-2-EF-VV is a general purpose one-coat adhesive for bonding various elastomers to metals, such as hot and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals. Formulated without reportable levels of lead (or other heavy metals), chlorinated solvents and ozone-depleting chemicals._x005F THIXON® OSN-2-EF-VV can bond Natural Rubber (NR), Polybutadiene (BR), Polyisoprene (IR), Chlorosulfonated polyethylene (CSM), Styrene Butadiene Rubber (SBR), Chloroprene (CR) and Polyacrylate (ACM)._x005F THIXON® OSN-2-EF-VV is also used for post-vulcanization bonding. In addition, product bonds rubber to synthetic fibers such as rayon and polyester. It is a good general purpose rubber to substrate bonding agent that can be used as single coat or two coat system. The use of a ROBOND, THIXON® or MEGUM® primer or a two coat system will provide the best environmental resistance however THIXON® OSN-2-EF-VV does quite well as a stand alone coating in many general rubber to metal bonding situations._x005F THIXON® OSN-2-EF-VV is designed for faster curing cycles and possibly lower curing temperatures.

Megum® 3290-1 product card banner
PRODUCT

MEGUM

MEGUM® 3290-1

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® 3290-1 is a one-coat bonding agent for bonding fluorocarbon rubbers to metals and other rigid substrates during volcanization. Also suitable for other common curing systems including bisphenolic and peroxide curing._x005F MEGUM® 3290-1 is a rubber to substrate bonding system with more aggressive cross-linking chemistry to give good environmental resistance in the finished good.

Betaseal® 1001 Em product card banner
PRODUCT

BETASEAL

BETASEAL® 1001 EM

Applications: Body Shop & Repair, Transportation Assembly, Electronics Adhesives

Product Families: Sealants, Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1001 EM is a medium viscosity, high modulus, non conductive, fast curing glass bonding adhesive which requires a primer during the process. It is a one component, ambient moisture curing adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension. BETASEAL® 1001 EM has a 3 hour Safe-Drive-Away-Time, crash tested to FMVSS 212 specification with twin airbags.

Thixon® 511-Ef product card banner
PRODUCT

THIXON

THIXON® 511-EF

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® 511-EF is a vulcanizing cover coat adhesive used with THIXON® or MEGUM® adhesive primers for bondingnatural rubber, SBR, EPDM, chloroprene, chlorosulfonated-polyethylene, butyl, and nitrile rubbers. It is formulated without reportable levels of lead (or other heavy metals), chlorinated solvents and ozone depleting chemicals.THIXON® 511-EF can also be used as a splice adhesive for bonding uncured rubber compounds to previously cured rubbers, and as an intermediate adhesive with a tie coat adhesive for open steam or autoclave curing tank linings. It is agood long-standing cover coat adhesive that has been used in very demanding application in building, automotive andi ndustrial applications. Along with the appropriate THIXON® OR MEGUM® Primers, this system will provide robust performance on an economical basis.

Megum® W-2525 product card banner
PRODUCT

MEGUM

MEGUM® W-2525

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® W-2525 is a waterborne-based one-coat adhesive for bonding fluorocarbon (both peroxide and bisphenol/diamine cure systems), peroxide cured EPDM, VMQ and some peroxide cured AEM compounds to metals and other solid materials under vulcanization conditions. This rubber to substrate bonding system is particularly useful in bonding peroxide cured FKM, FFKM and base-resistant (BRE) FKM compounds.

Megum® W-5125 product card banner
PRODUCT

MEGUM

MEGUM® W-5125

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® W-5125 is used as a one-coat adhesive or as a cover-coat adhesive for use with THIXON® waterborne orsolvent-based primers. It is intended for bonding Natural, SBR, Butyl, Nitrile, Polychloroprene and EPDM rubber compounds. The recommended primers are THIXON® P-11-EF or MEGUM® W-7025 if a two coat bonding system is required. This waterborne-based adhesive that has been designed specifically for bonding EPDM to glass substrates and provides one coat adhesion to many other substrates.

Megum® 3299 product card banner
PRODUCT

MEGUM

MEGUM® 3299

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® 3299 is a one-coat adhesive for the bonding of fluorocarbon rubbers to metals and other solid materials during vulcanization. It is particularly suitable for the bonding of peroxide cured fluorocarbon rubber. This rubber to substrate bonding system is particularly useful in bonding peroxide cured FKM, FFKM and base-resistant (BRE) FKM compounds.

Thixon® 422 product card banner
PRODUCT

THIXON

THIXON® 422

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® 422 is a one-component adhesive for bonding castable urethane to metal with excellent high temperature and humidity resistance of finished parts.

Thixon® 520-Ef product card banner
PRODUCT

THIXON

THIXON® 520-EF

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® 520-EF is a general purpose cover coat adhesive used for bonding rubber compounds to metals and otherrigid substrates during vulcanization. In rubber to metal bonding applications, THIXON® 520-EF requires a MEGUM® or THIXON® primer. Other rigid substrates such as thermoplastics and other metal alloys may not require a primer.However, environmental resistances of the final application need to be considered.THIXON® 520-EF consists of reactive polymers and pigments in xylene. It is formulated without reportable levels of leador other heavy metals.THIXON® 520-EF has well-balanced performance based on standard industry test specifications (ASTMD429-WDK2000).THIXON® 520-EF has good boiling water, heat and pre-bake resistance.THIXON® 520-EF enables global standardization and consolidation. Based on the chemistry, THIXON® 520-EF displayslow mold fouling properties.

Megum® W-3295 product card banner
PRODUCT

MEGUM

MEGUM® W-3295

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® W-3295 is a waterborne-based one-coat adhesive for bonding fluorocarbon and acrylate compounds to metals and other solid materials under vulcanization conditions. It is a rubber to substrate bonding system with more aggressive cross-linking chemistry to give good environmental resistance in the finished good.

Thixon® 300-301 product card banner
PRODUCT

THIXON

THIXON® 300-301

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® 300-301 is a two-component solvent-based one-coat vulcanizing adhesive system for bonding fluorocarbon elastomers to metal. THIXON® 300-301 consists of resins and polymers in MEK. It is formulated without reportable levels of lead or other toxic heavy metals, chlorinated solvents and ozone-depleting chemicals.

Megum® W-2545 product card banner
PRODUCT

MEGUM

MEGUM® W-2545

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® W-2545 is a high performance water-based single coat adhesive intended for bonding FKM, sulfur andperoxide cured NBR & HNBR and other rubber compounds in transportation seal applications. MEGUM® W-2545 haslow VOC, good adhesion to various rubber compounds and metal, excellent environmental resistance.

Thixon® P-6-ef product card banner
PRODUCT

THIXON

THIXON® P-6-EF

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® P-6-EF is a vulcanizing adhesive primer used with all MEGUM® or THIXON® cover coat adhesives to bondrubber compounds to rigid substrates. Due to its unique chemical attributes, it can be used in more environmentally stringent applications where water, glycol-water, glycol and elevated temperature cause issues with standard rubber to metal primer systems.

Thixon® 405 (Clear) product card banner
PRODUCT

THIXON

THIXON® 405 (Clear)

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® 405 (Clear/Black) is a one-coat adhesive for bonding castable polyurethane compounds and bonds thermoplastic polyurethanes to metal and other substrates. .

Megum® 538 product card banner
PRODUCT

MEGUM

MEGUM® 538

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® 538 is a general purpose cover coat adhesive used for bonding rubber compounds to metals and other rigid substrates during vulcanization. This product is especially suitable for bonding both difficult to bond compounds and soft compounds._x005F MEGUM® or THIXON® adhesive primers are used to adhere to metals such as hot and cold rolled steel, stainless steel, aluminum and brass prior to applying MEGUM® 538. These same primers can be used to adhere to thermoplastics such as polyamides and polyesters. This product is especially suitable for bonding both difficult to bond compounds and soft compounds used in NVH applications.

Megum® 5382 product card banner
PRODUCT

MEGUM

MEGUM® 5382

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® 5382 is a cover coat adhesive used for bonding rubber compounds to various metals and other rigid substrates during vulcanization._x005F MEGUM® 5382 may be used as one coat for some applications. This product is especially suitable for bonding both difficult to bond compounds and soft compounds. For conditions where environmental resistance may be needed, MEGUM® 5382 adhesive should be used in combination with MEGUM® or THIXON® primers. These same primers can be used to enable bonding to thermoplastics such as polyamides and polyesters._x005F MEGUM® 5382 is suitable for bonding both difficult to bond compounds and soft compounds used in NVH applications. The product applies easily by brush, dip or spray methods and provides durable bond resistance to a variety of elements._x005F MEGUM® 5382 accomodates a wide range of processing conditions including extended prebake.

Megum® W-9301 product card banner
PRODUCT

MEGUM

MEGUM® W-9301

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® W-9301 is a waterborne primer adhesive used in combination with a MEGUM®, ROBOND® or THIXON® adhesive cover coats, for bonding rubber compounds to metals and other rigid substrates during vulcanisation. MEGUM® W-9301 features good resistance against various fluids, e.g. brake, cooling and hydraulic fluids. Due to the formation of comparatively flexible film, this primer is especially suitable for rubber-to-metal parts which are being shaped after vulcanisation.

Megum® 128 product card banner
PRODUCT

MEGUM

MEGUM® 128

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® 128 is a general purpose cover coat adhesive used for bonding rubber compounds to metals and other rigid substrates during vulcanization. In rubber to metal bonding applications, MEGUM® 128 requires a MEGUM® or THIXON® primer. Other rigid substrates such as thermoplastics and other metal alloys may not require a primer. However, environmental resistances of the final application need to be considered._x005F MEGUM® 128 consists of reactive polymers and pigments in xylene. It is formulated without reportable levels of lead or other heavy metals._x005F MEGUM® or THIXON® primers adhere to hot and cold rolled steel, stainless steel, aluminum, brass and thermoplastics such as polyamides and polyesters._x005F MEGUM® 128 has well-balanced performance based on standard industry test specifications (ASTM D429-WDK2000)._x005F MEGUM® 128 has good boiling water, heat and pre-bake resistance._x005F MEGUM® 128 enables global standardization and consolidation. Based on the chemistry, MEGUM® 128 displays low mold fouling properties.

Megum® 3276 product card banner
PRODUCT

MEGUM

MEGUM® 3276

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® 3276 is a vulcanizing adhesive primer used with MEGUM® or THIXON® cover coat adhesives for bonding most elastomers to various substrates._x005F MEGUM® 3276 is also used as a one-coat for bonding polar rubber compounds such as nitrile or polychloroprene to metal or other materials. Due to the unique chemical composition, this adhesive has shown extraordinary resistance to heat and hot water resistance under very demanding conditions. Either as a one-coat bonding polar rubber compounds or in conjunction with one of the fine THIXON® or MEGUM® cover coats it is a very durable primer adhesive.

Betamate® Flex 100F product card banner
PRODUCT

BETAMATE

BETAMATE® Flex 100F

Applications: Transportation Assembly, Body Shop & Repair

Product Families: Adhesives

BETAMATE® Flex 100F is a one component, heat curing, elastic adhesive designed for body shop application. It is capable of bonding oily galvanized steel, cold rolled steel, aluminum, magnesium and CFRP.

Thixon® Yr-efv product card banner
PRODUCT

THIXON

THIXON® YR-EFV

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® YR-EFV is a general purpose one-coat adhesive used for bonding various elastomers to metals, such as hotand cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals.THIXON® YR-EFV is formulated without reportable levels of lead (or other heavy metals), chlorinated solvents and ozone-depleting chemicals.THIXON® YR-EFV bonds Natural Rubber (NR), Polybutadiene (BR), Polyisoprene (IR), Styrene Butadiene Rubber (SBR),Chloroprene (CR) and Polyacrylate (ACM). THIXON® YR-EFV is also used for post-vulcanization bonding. In addition,THIXON® YR-EFV bonds rubber to synthetic fibers such as rayon and polyester. It is a good general purpose rubber to substrate bonding agent that can be used as single coat or two coat system. The use of a ROBOND, THIXON® or MEGUM® primer or a two coat system will provide the best environmental resistance, however THIXON® YR-EFV doesquite well as a stand alone coating in many general rubber to metal bonding situations.THIXON® YR-EFV is designed for faster curing cycles and possibly lower curing temperatures

Thixon® Osn-2-s product card banner
PRODUCT

THIXON

THIXON® OSN-2-S

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® OSN-2-S is a general purpose one-coat adhesive used for bonding various elastomers to metals, such as hot and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals._x005F THIXON® OSN-2-S bonds Natural Rubber (NR), Polybutadiene (BR), Polyisoprene (IR), Styrene Butadiene Rubber (SBR), Chloroprene (CR) and Polyacrylate (ACM)._x005F THIXON® OSN-2-S is also used for post-vulcanization bonding. In addition, THIXON® OSN-2-EF bonds rubber to synthetic fibers such as rayon and polyester. It is a good general purpose rubber to substrate bonding agent that can be used as single coat or two coat system. The use of a ROBOND, THIXON® or MEGUM® primer or a two coat system will provide the best environmental resistance however THIXON® OSN-2-S does quite well as a stand alone coating in many general rubber to metal bonding situations._x005F THIXON® OSN-2-S contain very low levels of zinc and zinc oxide which makes it a desired choice in meeting local regulatory requirments relating to this type of element.

Thixon® 550 product card banner
PRODUCT

THIXON

THIXON® 550

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® 550 is a cover coat adhesive used with THIXON® adhesive primers for bonding EPDM, NR, HNBR, NBR, CR, IIR,and SBR compounds during vulcanization. It can also be used as a single coat adhesive for bonding synthetic elastomers to cord or fiber.THIXON® 550 is designed for hard to bond EPDM rubber compounds along with RFL treated synthetic fibers.

Megum® W-7025 product card banner
PRODUCT

MEGUM

MEGUM® W-7025

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® W-7025 is a waterborne-based seal adhesive for bonding NBR, HNBR, and XNBR compounds. There is no chlorinated polymers in the make up of this bonding system giving the optimum corrosion resistance.

Megum® 15637 product card banner
PRODUCT

MEGUM

MEGUM® 15637

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® 15637 is a solvent-based one-coat adhesive for the bonding of polar elastomers to metal or other rigid substrates during vulcanization.

Betaseal® 1125-1F product card banner
PRODUCT

BETASEAL

BETASEAL® 1125-1F

Applications: Body Shop & Repair, Transportation Assembly, Electronics Adhesives

Product Families: Sealants, Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1125-1F is a High viscosity, Medium modulus, Non-conductive glass and trim bonding adhesive which can be used primerless on paint for selected paint technologies. It has excellent UV stability and can be used for gap filling applications on commercial vehicals. It is a one component, ambient moisture curing, solvent free adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension.

Thixon® 300-Ef/301-ef product card banner
PRODUCT

THIXON

THIXON® 300-EF/301-EF

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® 300-EF/301-EF is a two component solvent based one-coat vulcanizing adhesive for bonding fluorocarbon elastomers to metal.THIXON® 300-EF/301-EF is formulated without reportable levels of lead (or other heavy metals), chlorinated solvents and ozone-depleting chemicals. It exhibits durable bonding, excellent environmental resistance including heat aging,salt exposure, fog, oil, and water immersion.