Products
DuPont
Kalrez® Spectrum™ 6375
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats
Features: High Temperature Resistance, Good Thermal Stability, Chemical Resistant
End Uses: Valve Parts, Electrical Connectors, Logging While Drilling Tools, Semiconductor Applications, Ball Valves, Measurement While Drilling Tools, Valves, Electric Submersible Pump
Color: Black
Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.
DuPont
Delrin® FG500SC NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2900.0 - 2900.0 MPa
Delrin® FG500SC is a masterbatch of 20% silicone fluid in Delrin@ FG500P. It is designed for cube-blending with any grade of Delrin@ for applications requiring low wear and friction against itself and other plastics. It has been developed for applications in contact with food.
DuPont
Delrin® 100 NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent
Flexural Modulus: 2800.0 - 2800.0 MPa
Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.
DuPont
Delrin® 100AF
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Injection Molding
Fillers Included: PTFE, PTFE Fiber
Additives Included: Lubricant (Unspecified), Mold Release Agent
Flexural Modulus: 2500.0 - 2500.0 MPa
Delrin® 100AF is a high viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics. Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.
DuPont
Kalrez® Spectrum™ 7075
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats
Features: Good Seal Force Retention, High Temperature Resistance, Low Compression Set, Good Thermal Stability, Chemical Resistant
End Uses: Flanges, Semiconductor Applications, Pump Parts, Hot Glue Delivery Nozzle, Valves, Valve Parts
Color: Black
Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was developed specifically for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.
DuPont
Delrin® 100P NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2800.0 - 2800.0 MPa
Delrin® 100P is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100P provides a great combination of toughness and strength, improved processing thermal stability and productivity for injection molding, and low VOC emissions.
DuPont
Delrin® 570 NC000
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent
Flexural Modulus: 4600.0 - 4600.0 MPa
Delrin® 570 is a medium viscosity acetal homopolymer containing 20% glass fiber filler for injection molding. It has very high stiffness, low warpage, and good creep resistance for superior performance at elevated temperature.
DuPont
Multiflex® G 60 A 11 BT 13893 Thermoplastic Elastomer
Polymer Name: Styrenic Thermoplastic Elastomer
Processing Methods: Injection Molding, Extrusion, Film Extrusion
Tear Strength: 23.0 - 23.0 kN/m
Strain at Break: 650.0 - 650.0 %
Multiflex® Automotive GT Range can be transformed between 190°C to 230°C. In this temperature range, materials are stable, above, thermal degradation occurs, resulting in yellowing and significant odor emanation. Multiflex® G 60 A 11 BT 13893 is designed for use in injection molding/extrusion
DuPont
Delrin® 500CL NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2900.0 - 2900.0 MPa
Delrin® 500CL is a medium viscosity acetal homopolymer containing a chemical lubricant, designed for low wear and friction against metals.
DuPont
Delrin® SC698 NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent
Flexural Modulus: 3000.0 - 3000.0 MPa
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries. Delrin® SC698 NC010 is a lubricated low viscosity acetal homopolymer, developed for high precision thin-walled parts requiring low wear and low friction with excellent surface aspect.
DuPont
Delrin® 500AF
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Injection Molding
Fillers Included: PTFE, PTFE Fiber
Additives Included: Lubricant (Unspecified), Mold Release Agent
Flexural Modulus: 2500.0 - 2500.0 MPa
Delrin® 500AF is a medium viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics.Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.
DuPont
Delrin® 527UV NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 3000.0 - 3000.0 MPa
Delrin® 527UV is a UV-stabilized medium viscosity acetal homopolymer developed for applications in automotive interiors. It represents a dramatic improvement over Delrin® 507 in mechanical performance after prolonged UV exposure and thermal stability.
DuPont
Delrin® 500T BK602
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2100.0 - 2100.0 MPa
Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.
DuPont
Multiflex® A 1004 BZ 4775 N0200 Compounded Rubber In Primary Form
Polymer Name: Styrenic Thermoplastic Elastomer
Processing Methods: Injection Molding, Extrusion
Tear Strength: 46.0 - 46.0 kN/m
Strain at Break: 550.0 - 550.0 %
Multiflex® A1004 B Z4775 N0200 is designed for use in injection molding/extrusion.
DuPont
Kalrez® 0090
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, O-rings, Valve Seats
Features: High Modulus, Durable, Good Thermal Stability, High Hardness, Chemical Resistant
End Uses: Semiconductor Applications, Pump Parts, Valves, O Rings, Valve Parts
Color: Black
Kalrez® 0090 perfluoroelastomer parts deliver durable, reliable sealing solutions for applications requiring excellent rapid gas decompression (RGD) properties as well as high hardness, high modulus properties, and excellent extrusion resistance (even without backup rings). Potential oil and gas applications include downhole equipment such as drilling and completion tools, as well as industrial equipment including pumps, valves and compressors. Kalrez® 0090 has been certified by two independent laboratories to meet rigorous requirements for resistance to RGD. In addition to demonstrated RGD resistance, Kalrez® 0090 seals provide superior performance in regard to chemical and temperature properties. Chemical resistance: Kalrez® 0090 is resistant to chemicals encountered in the oil and gas industry, including sour process streams containing H2S. Broad temperature capability: Kalrez® 0090 retains good physical properties up to temperatures as high as 250°C (482°F) and down to 21°C (5.8°F). Under pressurized conditions, in laboratory tests, Kalrez® 0090 has demonstrated low temperature performance down to 40°C (40°F).
DuPont
Delrin® 500CPE NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 500CPE (DE20729) is a medium viscosity acetal homopolymer with very low VOC emissions for applications in automotive interiors. It provides good mechanical performances with improved processing, thermal stability and productivity for injection molding.
DuPont
Delrin® 527UV BK701
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 3000.0 - 3000.0 MPa
Delrin® 527UV is a UV-stabilized medium viscosity acetal homopolymer developed for applications in automotive interiors. It represents a dramatic improvement over Delrin® 507 in mechanical performance after prolonged UV exposure and thermal stability.
DuPont
Delrin® 100ST BK602
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 1100.0 - 1100.0 MPa
Delrin® 100ST BK602 is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.
DuPont
Delrin® 300CPE NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 300CPE (DE20732) is a medium-high viscosity acetal homopolymer with outstanding balance of ease of processing and part performance, and with very low VOC emissions. Delrin® 300CPE provides optimum mechanical performance with its excellent combination of toughness and strength with improved processing, thermal stability and productivity for injection molding.
DuPont
Delrin® 500T NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2100.0 - 2100.0 MPa
Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.
DuPont
Delrin® 500AL NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2800.0 - 2800.0 MPa
Delrin® 500AL is a medium viscosity acetal homopolymer containing an advanced system of lubrication designed for low wear, low friction, and low noise against metals and plastics.
DuPont
MULTIBASE™ HMB-1103
Function: Slip Agent, Melt Flow Agent, Anti-Wear Agent
Chemical Family: Silicones
Compatible Polymers & Resins: Polyoxymethylene (POM), Polyamides
DuPont HMB-1103 Masterbatch is a new-generation tribological modifier and processing aid designed for polar engineered based systems such as PA. DuPont HMB-1103 Masterbatch delivers slip and wear performance similar to that of standard, highly loaded PTFE compounds. DuPont HMB-1103 Masterbatch is also highly efficient at suppressing stick-slip phenomenon. DuPont HMB-1103 Masterbatch acts as a processing aid and improves flowability.
DuPont
Multiflex® G 62 A 21 B Z1631 N0052 (A) Thermoplastic Elastomer
Polymer Name: Styrenic Thermoplastic Elastomer
Processing Methods: Injection Molding, Extrusion, Film Extrusion
Tear Strength: 37.0 - 37.0 kN/m
Strain at Break: 550.0 - 550.0 %
Compression Set (70 °C): 33.0 - 33.0 %
Multiflex® brand TES Automotive G Range are styrenics thermoplastic elastomers, designed for medium/high compression set applications. Compatibility with polyolefin enables bi-material parts (continuous process or cold insert).
DuPont
Multiflex® TPO 4203 SI1 Black 27522 Thermoplastic Elastomer
Polymer Name: Thermoplastic Polyolefin (TPO)
Processing Methods: Injection Molding
Features: Paintable
Density: 890.0 - 890.0 kg/m³
Strain at Break: 125.0 - 125.0 %
Flexural Modulus: 460.0 - 460.0 MPa
Multiflex® TPO 4203 Sl1 Black 27522 is designed for injected molded, paintable airbag covers and inflatable-restraint components
DuPont
Multiflex® A 1004 65A 520 FXT 16780 S
Polymer Name: Thermoplastic Elastomer (unspecified)
Processing Methods: Injection Molding, Extrusion
End Uses: Automotive Applications
Density: 1040.0 - 1040.0 kg/m³
Tear Strength: 37.0 - 37.0 kN/m
Multiflex® A1004 65A 520 FXT 16780S is designed for use in injection molding/extrusion.
DuPont
Delrin® 100ST NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 1100.0 - 1100.0 MPa
Delrin® 100ST is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.
DuPont
Vespel® CR-6110
Physical Form: Seals
Features: UV Resistant
End Uses: Semiconductor Applications, Bearings
Vespel® CR-6110 shapes are the latest carbon-fiber filled thermoplastic fluoropolymer that have demonstrated outstanding performance in aggressive wet chemical / plasma conditions and elevated temperatures.
DuPont
Multiflex® G 55 A 11 B Z1751 Thermoplastic Elastomer
Polymer Name: Styrenic Thermoplastic Elastomer
Processing Methods: Injection Molding, Extrusion
Tear Strength: 24.0 - 24.0 kN/m
Multiflex™ G are thermoplastic elastomers based styrenic, combining soft touch, elasticity and compression set performances. Compatibility with polyolefin enables bi-material parts (continuous process or cold insert).
DuPont
Multiflex® A 1004 65A 520 FXT 16780
Polymer Name: Thermoplastic Elastomer (unspecified)
Processing Methods: Injection Molding, Extrusion
End Uses: Automotive Applications
Density: 1020.0 - 1020.0 kg/m³
Tear Strength: 31.0 - 31.0 kN/m
Multiflex® A 1004 65A 520 FXT 16780 is designed for injected molded, unpainted airbag covers and inflatable-restraint components.
DuPont
Vespel® SP-2515
Polymer Name: Thermoplastic Polyimide (TPI), Polyimide (PI)
Physical Form: Seals
Features: Low Friction, Good Thermal Stability, Dimensional Stability, Low Energy Consumption
End Uses: Semiconductor Applications, Bushings, Washer
Parts made from Vespel® SP-2515 offer a low coefficient of thermal expansion (CTE), excellent wear against both aluminum and steel alloys, and a low coefficient of friction in both dry and lubricated conditions. These properties make Vespel® SP-2515 parts ideal for applications such as seal rings, thrust washers, and bushings where high energy efficiency and dimensional stability, over a broad range of temperatures, are a requirement.
DuPont
Multiflex® TES 2403 SI1 Natural Thermoplastic Elastomer
Polymer Name: Styrenic Thermoplastic Elastomer
Processing Methods: Injection Molding
Tear Strength: 75.0 - 75.0 kN/m
Strain at Break: 250.0 - 250.0 %
Multiflex® TES 2403 SI1 NAT is designed for injected molded, paintable airbag covers and inflatable-restraint components.
DuPont
Multiflex® TPO 4404 SI1 Black 28164 Thermoplastic Elastomer
Polymer Name: Thermoplastic Polyolefin (TPO)
Processing Methods: Injection Molding
Features: Paintable
Density: 890.0 - 890.0 kg/m³
Strain at Break: 170.0 - 170.0 %
Flexural Modulus: 440.0 - 440.0 MPa
Multiflex® TPO 4404 SI1 Black 28164 is designed for injected molded, paintable airbag covers and inflatable-restraint components
DuPont
Delrin® 100 BK602
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion
Additives Included: Mold Release Agent
Flexural Modulus: 2900.0 - 2900.0 MPa
Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.
DuPont
Multiflex® TES 2803 SI1 Blk 23052 Thermoplastic Elastomer
Polymer Name: Styrenic Thermoplastic Elastomer
Processing Methods: Injection Molding
Tear Strength: 75.0 - 75.0 kN/m
Strain at Break: 160.0 - 160.0 %
Multiflex® TES 2803 SI1 BLK 23052 is designed for injected molded, paintable airbag covers and inflatable-restraint components.
DuPont
Multiflex® TES 2403 SI1 Natural 27836 Thermoplastic Elastomer
Polymer Name: Styrenic Thermoplastic Elastomer
Processing Methods: Injection Molding
Tear Strength: 76.0 - 76.0 kN/m
Strain at Break: 210.0 - 210.0 %
Multiflex® TES 2403 SI1 NAT 27836 is designed for injected molded, paintable airbag covers and inflatable-restraint components.
DuPont
Multiflex® G 75 A 520 205/09 10779 Thermoplastic Elastomer
Polymer Name: Styrenic Thermoplastic Elastomer
Processing Methods: Injection Molding, Extrusion
Tear Strength: 35.0 - 35.0 kN/m
Multiflex® brand TES Automotive G Range are styrenics thermoplastic elastomers, designed for medium/high compression set applications. Compatibility with polyolefin enables bi-material parts (continuous process or cold insert).