Company logo

Products

DuPont
Building & Construction
Applications
Building Materials
Flooring & Surfaces
Building Envelope & Roofing
Decorative Materials & Finishes
Infrastructure, Roads & Paving
72 products found on DuPont in Building & Construction .
With TDS
Kalrez® Spectrum™ 6375 product card banner

DuPont

Kalrez® Spectrum™ 6375

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats

Features: High Temperature Resistance, Good Thermal Stability, Chemical Resistant

End Uses: Valve Parts, Electrical Connectors, Logging While Drilling Tools, Semiconductor Applications, Ball Valves, Measurement While Drilling Tools, Valves, Electric Submersible Pump

Color: Black

Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.

Delrin® 100 Nc010 product card banner

DuPont

Delrin® 100 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.

Delrin® 100af product card banner

DuPont

Delrin® 100AF

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Injection Molding

Fillers Included: PTFE, PTFE Fiber

Additives Included: Lubricant (Unspecified), Mold Release Agent

Flexural Modulus: 2500.0 - 2500.0 MPa

Delrin® 100AF is a high viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics. Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.

Kalrez® Spectrum™ 7075 product card banner

DuPont

Kalrez® Spectrum™ 7075

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats

Features: Good Seal Force Retention, High Temperature Resistance, Low Compression Set, Good Thermal Stability, Chemical Resistant

End Uses: Flanges, Semiconductor Applications, Pump Parts, Hot Glue Delivery Nozzle, Valves, Valve Parts

Color: Black

Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was developed specifically for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.

Delrin® 500af product card banner

DuPont

Delrin® 500AF

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Injection Molding

Fillers Included: PTFE, PTFE Fiber

Additives Included: Lubricant (Unspecified), Mold Release Agent

Flexural Modulus: 2500.0 - 2500.0 MPa

Delrin® 500AF is a medium viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics.Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.

Delrin® 500t Bk602 product card banner

DuPont

Delrin® 500T BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2100.0 - 2100.0 MPa

Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.

Kalrez® 0090 product card banner

DuPont

Kalrez® 0090

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings, Valve Seats

Features: High Modulus, Durable, Good Thermal Stability, High Hardness, Chemical Resistant

End Uses: Semiconductor Applications, Pump Parts, Valves, O Rings, Valve Parts

Color: Black

Kalrez® 0090 perfluoroelastomer parts deliver durable, reliable sealing solutions for applications requiring excellent rapid gas decompression (RGD) properties as well as high hardness, high modulus properties, and excellent extrusion resistance (even without backup rings). Potential oil and gas applications include downhole equipment such as drilling and completion tools, as well as industrial equipment including pumps, valves and compressors. Kalrez® 0090 has been certified by two independent laboratories to meet rigorous requirements for resistance to RGD. In addition to demonstrated RGD resistance, Kalrez® 0090 seals provide superior performance in regard to chemical and temperature properties. Chemical resistance: Kalrez® 0090 is resistant to chemicals encountered in the oil and gas industry, including sour process streams containing H2S. Broad temperature capability: Kalrez® 0090 retains good physical properties up to temperatures as high as 250°C (482°F) and down to 21°C (5.8°F). Under pressurized conditions, in laboratory tests, Kalrez® 0090 has demonstrated low temperature performance down to 40°C (40°F).

Delrin® 500t Nc010 product card banner

DuPont

Delrin® 500T NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2100.0 - 2100.0 MPa

Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.

Delrin® 100st Bk602 product card banner

DuPont

Delrin® 100ST BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 1100.0 - 1100.0 MPa

Delrin® 100ST BK602 is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.

Multibase™ Hmb-1103 product card banner

DuPont

MULTIBASE™ HMB-1103

Function: Slip Agent, Melt Flow Agent, Anti-Wear Agent

Chemical Family: Silicones

Compatible Polymers & Resins: Polyoxymethylene (POM), Polyamides

DuPont HMB-1103 Masterbatch is a new-generation tribological modifier and processing aid designed for polar engineered based systems such as PA. DuPont HMB-1103 Masterbatch delivers slip and wear performance similar to that of standard, highly loaded PTFE compounds. DuPont HMB-1103 Masterbatch is also highly efficient at suppressing stick-slip phenomenon. DuPont HMB-1103 Masterbatch acts as a processing aid and improves flowability.

Kalrez® 8575 product card banner

DuPont

Kalrez® 8575

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings, Valve Seats

Features: Good Elastic Recovery, Low Outgassing, Good Mechanical Properties, Long Seal Life, Low Compression Set, Good Thermal Stability, Less Infrared Absorption

End Uses: Valve Parts, Semiconductor Applications, Valves

Color: White

Kalrez® 8575 perfluoroelastomer parts are a white product for oxidation, diffusion, lamp anneal and RTP sealing applications. Kalrez® 8575 exhibits excellent thermal stability and long-term sealing performance, less Infrared (IR) absorption and significantly reduced outgassing properties at elevated temperatures. It also has good mechanical properties and is well-suited for both static and low stress/low sealing force applications. A maximum application temperature of 300°C (572°F) is suggested. Ultrapure post-cleaning and packaging is standard for all 8575 parts._x005F

Vespel® Cr-6110 product card banner

DuPont

Vespel® CR-6110

Physical Form: Seals

Features: UV Resistant

End Uses: Semiconductor Applications, Bearings

Vespel® CR-6110 shapes are the latest carbon-fiber filled thermoplastic fluoropolymer that have demonstrated outstanding performance in aggressive wet chemical / plasma conditions and elevated temperatures.

Delrin® 100st Nc010 product card banner

DuPont

Delrin® 100ST NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 1100.0 - 1100.0 MPa

Delrin® 100ST is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.

Vespel® Sp-2515 product card banner

DuPont

Vespel® SP-2515

Polymer Name: Thermoplastic Polyimide (TPI), Polyimide (PI)

Physical Form: Seals

Features: Low Friction, Good Thermal Stability, Dimensional Stability, Low Energy Consumption

End Uses: Semiconductor Applications, Bushings, Washer

Parts made from Vespel® SP-2515 offer a low coefficient of thermal expansion (CTE), excellent wear against both aluminum and steel alloys, and a low coefficient of friction in both dry and lubricated conditions. These properties make Vespel® SP-2515 parts ideal for applications such as seal rings, thrust washers, and bushings where high energy efficiency and dimensional stability, over a broad range of temperatures, are a requirement.

Tpsiv® 4000-75a Sr product card banner

DuPont

TPSiV® 4000-75A SR

Polymer Name: Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1100.0 - 1100.0 kg/m³

Tear Strength: 64.0 - 64.0 kN/m

Compression Set (70 °C): 70.0 - 70.0 %

TPSiV® 4000-75A SR by DuPont is comprised of Thermoplastic Vulcanizate. It is commonly used It is available in Pellets form.

Delrin® 100 Bk602 product card banner

DuPont

Delrin® 100 BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.

Tpsiv® 3345-65a Natural 25564 Thermoplastic Elastomer product card banner

DuPont

TPSiV® 3345-65A Natural 25564 Thermoplastic Elastomer

Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1170.0 - 1170.0 kg/m³

Tear Strength: 41.0 - 41.0 kN/m

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Vespel® Cp-0600 product card banner

DuPont

Vespel® CP-0600

Function: Molding Compound

Chemical Family: Polyimides (PI)

Reinforcement Material: Carbon Fibers

Vespel® CP-0644, CP-0648 and CP-0650 composite parts consist of woven, carbon- fiber fabrics laminated in polyimide resin for strong, light, and durable components.

Tpsiv® 4000-75a Sr Black Solid Thermoplastic Elastomer product card banner

DuPont

TPSiV® 4000-75A SR Black Solid Thermoplastic Elastomer

Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1100.0 - 1100.0 kg/m³

Tear Strength: 64.0 - 64.0 kN/m

Compression Set (70 °C): 70.0 - 70.0 %

TPSiV® 4000-75A SR thermoplastic elastomer is a UV stable material with good scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Tpsiv® 3345-65a Bk029 Thermoplastic Elastomer product card banner

DuPont

TPSiV® 3345-65A BK029 Thermoplastic Elastomer

Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1170.0 - 1170.0 kg/m³

Tear Strength: 41.0 - 41.0 kN/m

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Tpsiv® 5300 A 6002 Natural Thermoplastic Elastomer product card banner

DuPont

TPSiV® 5300 A 6002 Natural Thermoplastic Elastomer

Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 920.0 - 920.0 kg/m³

Tear Strength: 44.0 - 44.0 kN/m

TPSiV® 5300 A6002 thermoplastic elastomer is a low odor, plasticiser-free thermoplastic elastomer with excellent bonding to polypropylene and polyethylene. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Kalrez® 7075up product card banner

DuPont

Kalrez® 7075UP

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Valve Seats, O-rings

Features: Good Mechanical Properties, Good Seal Force Retention, Excellent Resistance To Plasma Radicals, Good Compression Set, Good Thermal Stability, Low Outgassing

End Uses: Valves, Valve Parts, Semiconductor Applications

Color: Black

Kalrez® 7075UP perfluoroelastomer parts are a black product targeted specifically metal CVD applications. It offers outstanding thermal stability, very low outgassing and excellent compression set properties. Kalrez® 7075UP exhibits excellent seal force retention, has good mechanical properties and is well suited for both static and dynamic sealing applications. A maximum application temperature of 327°C (620°F) is suggested. Short excursions to higher temperatures may also be possible. Ultrapure postcleaning and packaging is standard for all parts made from Kalrez® 7075UP.

Delrin® 500tl Nc010 product card banner

DuPont

Delrin® 500TL NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Fillers Included: PTFE, PTFE Micropowder

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3100.0 - 3100.0 MPa

Delrin® 500TL is a medium viscosity acetal homopolymer containing 1.5% Teflon® PTFE Micropowder lubricant. It is designed for applications requiring reduced wear and friction against steel, itself, or other plastics.

Tpsiv® 3345-65a Custom Color Thermoplastic Elastomer product card banner

DuPont

TPSiV® 3345-65A Custom Color Thermoplastic Elastomer

Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1170.0 - 1170.0 kg/m³

Tear Strength: 41.0 - 41.0 kN/m

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Tpsiv® 3345-65a Black 25565 Thermoplastic Elastomer product card banner

DuPont

TPSiV® 3345-65A Black 25565 Thermoplastic Elastomer

Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1170.0 - 1170.0 kg/m³

Tear Strength: 41.0 - 41.0 kN/m

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Kalrez® W240 product card banner

DuPont

Kalrez® W240

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Low Metal Content, Good Mechanical Properties, Good Compression Set

End Uses: Semiconductor Applications, Pump Parts

Color: Black

Kalrez® W240 perfluoroelastomer parts are a black product for photovoltaic wet manufacturing processes requiring a wide range of chemical resistance. W240 provides an excellent combination of properties (resistance to acids/bases) and is the product of choice for wet processes as an upgrade from standard elastomers, i.e., FKM, NBR, EPDM, etc. A maximum service temperature of 230°C is suggested.

Tpsiv® 4000-75a Sr Natural Thermoplastic Elastomer product card banner

DuPont

TPSiV® 4000-75A SR Natural Thermoplastic Elastomer

Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1100.0 - 1100.0 kg/m³

Tear Strength: 64.0 - 64.0 kN/m

Compression Set (70 °C): 70.0 - 70.0 %

TPSiV® 4000-75A SR thermoplastic elastomer is a UV stable material with good scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Tpsiv® X-5300 A8503 Natural 25644 Thermoplastic Elastomer product card banner

DuPont

TPSiV® X-5300 A8503 Natural 25644 Thermoplastic Elastomer

Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1000.0 - 1000.0 kg/m³

Tear Strength: 61.0 - 61.0 kN/m

Compression Set (70 °C): 45.0 - 45.0 %

TPSiV® X5300 A8503 NAT 25644 thermoplastic elastomer is a low odor, plasticiser-free thermoplastic elastomer with excellent bonding to polypropylene and polyethylene. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Tpsiv® 5300 A 6002 White T 25848 Thermoplastic Elastomer product card banner

DuPont

TPSiV® 5300 A 6002 White T 25848 Thermoplastic Elastomer

Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 920.0 - 920.0 kg/m³

Tear Strength: 44.0 - 44.0 kN/m

TPSiV® 5300 A6002 thermoplastic elastomer is a low odor, plasticiser-free thermoplastic elastomer with excellent bonding to polypropylene and polyethylene. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Delrin® 100ste Nc010 product card banner

DuPont

Delrin® 100STE NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 1250.0 - 1250.0 MPa

Delrin® 100STE is a super-toughened, high viscosity acetal homopolymer with very low VOC emissions for applications in automotive interiors. Processing methods include injection molding.

Vespel® St-2010 product card banner

DuPont

Vespel® ST-2010

Polymer Name: Thermoplastic Polyimide (TPI), Polyimide (PI)

Physical Form: Custom, Valve Seats, O-rings

Features: Low Friction, Good Strength, Good Toughness, High Elongation

End Uses: Semiconductor Applications, Washer, Bearings, Valves, Valve Parts

Vespel® ST-2010 parts and shapes can be used for lubricated or non-lubricated, low friction and wear applications including valve seats, seals, bearings, washers and seal rings.

Vespel® Sp-3 product card banner

DuPont

Vespel® SP-3

Polymer Name: Thermoplastic Polyimide (TPI), Polyimide (PI)

Physical Form: Rods, Bars, Tube, Plaques

End Uses: Semiconductor Applications, Bearings

Vespel® SP-3 parts and shapes are specified for seals and bearings in vacuum or dry environments.

Tpsiv® 4000-75a Sr Super Lemon Thermoplastic Elastomer product card banner

DuPont

TPSiV® 4000-75A SR Super Lemon Thermoplastic Elastomer

Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1100.0 - 1100.0 kg/m³

Tear Strength: 64.0 - 64.0 kN/m

Compression Set (70 °C): 70.0 - 70.0 %

TPSiV® 4000-75A SR thermoplastic elastomer is a UV stable material with good scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Tpsiv® 4000-75a Sr Artic White Thermoplastic Elastomer product card banner

DuPont

TPSiV® 4000-75A SR Artic White Thermoplastic Elastomer

Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1100.0 - 1100.0 kg/m³

Tear Strength: 64.0 - 64.0 kN/m

Compression Set (70 °C): 70.0 - 70.0 %

TPSiV® 4000-75A SR thermoplastic elastomer is a UV stable material with good scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Betaseal® 10500bn product card banner

DuPont

BETASEAL® 10500BN

Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive

Cure Method: Moisture Cure

Application Method: Electrical Gun, Pneumatic Gun

Chemical Family: Polyurethanes (PU)

BETASEAL® 10500BN is a one-component, moisture-curing polyurethane seam sealant and semi strucural adhesive with permanent elasticity and good adhesion to different substrates.

Tedlar® Tap15bm3 product card banner

DuPont

Tedlar® TAP15BM3

Polymer Name: Polyvinyl Fluoride (PVF)

Physical Form: Film

Features: Crack Resistant, Corrosion Resistant, Good Weather Stability, Excellent Salt Spray Resistance, Design Flexibility, High Performance, Durable, Cleanable, Good UV Resistance, Chemical Resistant, Good Stain Resistance, Cost Effective, Graffiti Resistant, Good Aesthetics, Excellent Moisture Resistance, Long Term Protection

Color: Transparent

New Tedlar® Durable Transparent Protective Film (TAP 15BM3) Offers Ideal Protection for Architectural Exteriors and Graphic Signage. The new DuPont™ Tedlar® transparent PVF film is a high-performance protective material that provides decades of durable protection to various exterior architectural and graphic signage applications. With its unique attributes, Tedlar® transparent PVF film can preserve the life and esthetics of your design amidst the harshest environmental challenges including ultraviolet (UV) light, moisture, rain, and chemical erosions.