Company logo

Products

DuPont
Appliances & Electronics
116 products found on DuPont in Appliances & Electronics .
With TDS
Delrin® 150 Nc010 product card banner

DuPont

Delrin® 150 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® 150 NC010 is a high viscosity acetal homopolymer specifically designed for extrusion processes. It has excellent thermal stability, low die deposit, and enhanced crystallization for low porosity.

Kalrez® Spectrum™ 6375 product card banner

DuPont

Kalrez® Spectrum™ 6375

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats

Features: High Temperature Resistance, Good Thermal Stability, Chemical Resistant

End Uses: Valve Parts, Electrical Connectors, Logging While Drilling Tools, Semiconductor Applications, Ball Valves, Measurement While Drilling Tools, Valves, Electric Submersible Pump

Color: Black

Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.

Delrin® 100 Nc010 product card banner

DuPont

Delrin® 100 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.

Kalrez® Spectrum™ 7075 product card banner

DuPont

Kalrez® Spectrum™ 7075

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats

Features: Good Seal Force Retention, High Temperature Resistance, Low Compression Set, Good Thermal Stability, Chemical Resistant

End Uses: Flanges, Semiconductor Applications, Pump Parts, Hot Glue Delivery Nozzle, Valves, Valve Parts

Color: Black

Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was developed specifically for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.

Delrin® 100p Nc010 product card banner

DuPont

Delrin® 100P NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® 100P is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100P provides a great combination of toughness and strength, improved processing thermal stability and productivity for injection molding, and low VOC emissions.

Delrin® Sc698 Nc010 product card banner

DuPont

Delrin® SC698 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent

Flexural Modulus: 3000.0 - 3000.0 MPa

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries. Delrin® SC698 NC010 is a lubricated low viscosity acetal homopolymer, developed for high precision thin-walled parts requiring low wear and low friction with excellent surface aspect.

Delrin® 577 Bk000 product card banner

DuPont

Delrin® 577 BK000

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent

Flexural Modulus: 4600.0 - 4600.0 MPa

Delrin® 577 is a medium viscosity acetal homopolymer (Polyoxymethylene POM) containing 20% glass fiber filler for injection molding. It has very high stiffness, low warpage, and good creep resistance for superior performance at elevated temperature. It contains carbon black for improved weathering.

Delrin® 111pa Nc010 product card banner

DuPont

Delrin® 111PA NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® 111PA NC010 is a Nucleated High Viscosity Acetal Homopolymer.

Delrin® Fg911dp Nc010 product card banner

DuPont

Delrin® FG911DP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3300.0 - 3300.0 MPa

Delrin® FG911DP is a low viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.

Delrin® Fg500mxd Bla090 product card banner

DuPont

Delrin® FG500MXD BLA090

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 3400.0 - 3400.0 MPa

Delrin® FG500MXD is a metal- and X-ray-detectable medium viscosity acetal homopolymer for injection molding and extrusion. It has been developed for applications in contact with food. Detection limits need to be determined as a function of the detector and other process variables.

Delrin® 500t Bk602 product card banner

DuPont

Delrin® 500T BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2100.0 - 2100.0 MPa

Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.

Delrin® 500mt Nc010 product card banner

DuPont

Delrin® 500MT NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Cable Extrusion, Injection Molding

Additives Included: Mold Release Agent

Flexural Modulus: 1500.0 - 1500.0 MPa

Delrin® 500MT NC010 is a Medium Toughened, Toughened, Medium Viscosity Acetal Homopolymer.

Delrin® 500cpe Nc010 product card banner

DuPont

Delrin® 500CPE NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 500CPE (DE20729) is a medium viscosity acetal homopolymer with very low VOC emissions for applications in automotive interiors. It provides good mechanical performances with improved processing, thermal stability and productivity for injection molding.

Kalrez® 0090 product card banner

DuPont

Kalrez® 0090

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings, Valve Seats

Features: High Modulus, Durable, Good Thermal Stability, High Hardness, Chemical Resistant

End Uses: Semiconductor Applications, Pump Parts, Valves, O Rings, Valve Parts

Color: Black

Kalrez® 0090 perfluoroelastomer parts deliver durable, reliable sealing solutions for applications requiring excellent rapid gas decompression (RGD) properties as well as high hardness, high modulus properties, and excellent extrusion resistance (even without backup rings). Potential oil and gas applications include downhole equipment such as drilling and completion tools, as well as industrial equipment including pumps, valves and compressors. Kalrez® 0090 has been certified by two independent laboratories to meet rigorous requirements for resistance to RGD. In addition to demonstrated RGD resistance, Kalrez® 0090 seals provide superior performance in regard to chemical and temperature properties. Chemical resistance: Kalrez® 0090 is resistant to chemicals encountered in the oil and gas industry, including sour process streams containing H2S. Broad temperature capability: Kalrez® 0090 retains good physical properties up to temperatures as high as 250°C (482°F) and down to 21°C (5.8°F). Under pressurized conditions, in laboratory tests, Kalrez® 0090 has demonstrated low temperature performance down to 40°C (40°F).

Delrin® Fg100 Nc010 product card banner

DuPont

Delrin® FG100 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Flexural Modulus: 2700.0 - 2700.0 MPa

Delrin® FG100 NC010 is a High Viscosity Acetal Homopolymer.

Delrin® Fg111dp Nc010 product card banner

DuPont

Delrin® FG111DP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries. Delrin® FG111DP is a high viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.

Delrin® 311dp Nc010 product card banner

DuPont

Delrin® 311DP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3100.0 - 3100.0 MPa

Delrin® 311DP is a medium-high viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage and fewer voids.

Delrin® 300cpe Nc010 product card banner

DuPont

Delrin® 300CPE NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 300CPE (DE20732) is a medium-high viscosity acetal homopolymer with outstanding balance of ease of processing and part performance, and with very low VOC emissions. Delrin® 300CPE provides optimum mechanical performance with its excellent combination of toughness and strength with improved processing, thermal stability and productivity for injection molding.

Delrin® 500t Nc010 product card banner

DuPont

Delrin® 500T NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2100.0 - 2100.0 MPa

Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.

Delrin® 100st Bk602 product card banner

DuPont

Delrin® 100ST BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 1100.0 - 1100.0 MPa

Delrin® 100ST BK602 is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.

Multibase™ Hmb-1103 product card banner

DuPont

MULTIBASE™ HMB-1103

Function: Slip Agent, Melt Flow Agent, Anti-Wear Agent

Chemical Family: Silicones

Compatible Polymers & Resins: Polyoxymethylene (POM), Polyamides

DuPont HMB-1103 Masterbatch is a new-generation tribological modifier and processing aid designed for polar engineered based systems such as PA. DuPont HMB-1103 Masterbatch delivers slip and wear performance similar to that of standard, highly loaded PTFE compounds. DuPont HMB-1103 Masterbatch is also highly efficient at suppressing stick-slip phenomenon. DuPont HMB-1103 Masterbatch acts as a processing aid and improves flowability.

Delrin® 510gr Nc000 product card banner

DuPont

Delrin® 510GR NC000

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent

Flexural Modulus: 5250.0 - 5250.0 MPa

Delrin® 510GR is a 10% glass-reinforced acetal homopolymer for injection molding. It has high strength, stiffness, and high deflection temperature and excellent creep resistance.

Kalrez® 8575 product card banner

DuPont

Kalrez® 8575

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings, Valve Seats

Features: Good Elastic Recovery, Low Outgassing, Good Mechanical Properties, Long Seal Life, Low Compression Set, Good Thermal Stability, Less Infrared Absorption

End Uses: Valve Parts, Semiconductor Applications, Valves

Color: White

Kalrez® 8575 perfluoroelastomer parts are a white product for oxidation, diffusion, lamp anneal and RTP sealing applications. Kalrez® 8575 exhibits excellent thermal stability and long-term sealing performance, less Infrared (IR) absorption and significantly reduced outgassing properties at elevated temperatures. It also has good mechanical properties and is well-suited for both static and low stress/low sealing force applications. A maximum application temperature of 300°C (572°F) is suggested. Ultrapure post-cleaning and packaging is standard for all 8575 parts._x005F

Delrin® 100st Nc010 product card banner

DuPont

Delrin® 100ST NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 1100.0 - 1100.0 MPa

Delrin® 100ST is a super-toughened, high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed parts where outstanding toughness is essential.

Delrin® Fg100p Nc010 product card banner

DuPont

Delrin® FG100P NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2600.0 - 2600.0 MPa

Delrin® FG100P is a high viscosity acetal homopolymer for use in easy-to-fill molds. It provides a great combination of toughness and strength, and improved processing thermal stability and productivity for injection molding. It has been developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Delrin® Fg500p Nc010 product card banner

DuPont

Delrin® FG500P NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® FG500P is a general purpose medium viscosity acetal homopolymer for injection molding. It has improved processing thermal stability and a good combination of mechanical properties. It has been developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Tpsiv® 4000-75a Sr product card banner

DuPont

TPSiV® 4000-75A SR

Polymer Name: Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1100.0 - 1100.0 kg/m³

Tear Strength: 64.0 - 64.0 kN/m

Compression Set (70 °C): 70.0 - 70.0 %

TPSiV® 4000-75A SR by DuPont is comprised of Thermoplastic Vulcanizate. It is commonly used It is available in Pellets form.

Delrin® 100 Bk602 product card banner

DuPont

Delrin® 100 BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.

Delrin® 100km Nc000 product card banner

DuPont

Delrin® 100KM NC000

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Injection Molding

Fillers Included: Kevlar Fiber

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® 100KM NC000 is a high viscosity acetal homopolymer with Kevlar® aramid resin. It is designed for applications requiring low wear in abrasive environments.

Dupont Rl897 product card banner

DuPont

DuPont RL897

Ready to Use Product Type: Oil, Refrigeration Oils

Application Area: Compressors

Features: Excellent Lubricity, Excellent Miscibility, Good Stability, Chemical Resistant

Chemical Family: Polyalkylene Glycols (PAG), Polyglycols

DuPont RL897 is a low viscosity polyalkylene glycol (PAG) based lubricant developed to meet the challenging lubrication needs of high-performance compressors. Designed for use with refrigerant R-134a in both fixed and variable displacement compressors of swash plate and other designs. DuPont RL897 exhibits higher phase separation temperatures in R-134a, which allows its use in both orifice tube and thermal expansion valve (TXV) A/C systems.

Tpsiv® 3345-65a Natural 25564 Thermoplastic Elastomer product card banner

DuPont

TPSiV® 3345-65A Natural 25564 Thermoplastic Elastomer

Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1170.0 - 1170.0 kg/m³

Tear Strength: 41.0 - 41.0 kN/m

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Delrin® 300cp Bk602 product card banner

DuPont

Delrin® 300CP BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent

Delrin® 300CP is a medium-high viscosity acetal homopolymer with improved thermal stability and an outstanding balance of ease of processing and part performance. This black is formulated to maintain the mechanical properties of the natural.

Tpsiv® 4000-60a Black Thermoplastic Elastomer product card banner

DuPont

TPSiV® 4000-60A Black Thermoplastic Elastomer

Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1100.0 - 1100.0 kg/m³

Tear Strength: 30.0 - 30.0 kN/m

Compression Set (70 °C): 87.0 - 87.0 %

TPSiV® 4000-60A SR thermoplastic elastomer is a UV stable material with excellent abrasion and scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on smartphones, portable electronic cases and wearable electronic devices.

Delrin® Fg900p Nc010 product card banner

DuPont

Delrin® FG900P NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® FG900P is a general purpose low viscosity acetal homopolymer for multicavity and thin wall molding with improved processing thermal stability. It has been developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Delrin® Fg311dp Nc010 product card banner

DuPont

Delrin® FG311DP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Film Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3100.0 - 3100.0 MPa

Delrin® FG311DP is a medium-high viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage and fewer voids. It has been developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Delrin® 100al Nc010 product card banner

DuPont

Delrin® 100AL NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® 100AL is a high viscosity acetal homopolymer containing an advanced system of lubrication designed for low wear, low friction, and low noise against metals and plastics.