DuPont
Kalrez® 4079
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, Custom, Diaphragms, O-rings
Features: Good Mechanical Properties, High Temperature Resistance, Heat Aging Resistant, Low Compression Set, Good Thermal Stability, Chemical Resistant, General Purpose
End Uses: Semiconductor Applications, Pump Parts, Aircraft Applications
Color: Black
Kalrez® 4079 perfluoroelastomer parts are a low compression set product for general purpose use in O-rings, diaphragms, seals and other parts used in the chemical process and aircraft industries. It is a carbon black filled product with excellent chemical resistance, good mechanical properties, and outstanding hot air aging properties. It exhibits low swell in organic acids, inorganic acids and aldehydes, and has good response to temperature cycling effects. A maximum service temperature of 316°C (600°F) is suggested, with short excursions to higher temperatures possible. Kalrez® 4079 is not recommended for use in hot water/steam applications or in contact with certain hot aliphatic amines, ethylene oxide, or propylene oxide.
DuPont
Kalrez® Spectrum™ 6375
Applications: Other Packaging & Assembly Applications, Semiconductor Manufacturing, Equipment & Parts
Product Families: Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
End Uses: Semiconductor Applications, Valve Parts, Electrical Connectors
Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.
DuPont
Delrin® FG500SC NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2900.0 - 2900.0 MPa
Delrin® FG500SC is a masterbatch of 20% silicone fluid in Delrin@ FG500P. It is designed for cube-blending with any grade of Delrin@ for applications requiring low wear and friction against itself and other plastics. It has been developed for applications in contact with food.
DuPont
Delrin® 100AF
Flexural Modulus: 2500.0 - 2500.0 MPa
Delrin® 100AF is a high viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics. Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.
DuPont
Kalrez® Spectrum™ 7075
Applications: Other Packaging & Assembly Applications, Semiconductor Manufacturing, Equipment & Parts
Product Families: Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
End Uses: Semiconductor Applications, Valve Parts, Pump Parts
Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was developed specifically for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.
DuPont
Delrin® 100P NC010
Flexural Modulus: 2800.0 - 2800.0 MPa
Delrin® 100P is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100P provides a great combination of toughness and strength, improved processing thermal stability and productivity for injection molding, and low VOC emissions.
DuPont
Kalrez® 9100
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals
Features: Excellent Resistance To Plasma Radicals, Low Compression Set, Good Thermal Stability, Good Elastic Recovery, Low Outgassing, Low Metal Content, Good Mechanical Properties
End Uses: Semiconductor Applications, Pump Parts
Color: Amber
Kalrez® 9100 is an amber translucent product targeted specifically for PECVD, ALD, HDPCVD and Conductor (Poly/Metal) Etch applications*. Kalrez® 9100 has been specifically designed for low erosion and ultra-low particle generation in harsh plasma environments. It offers excellent thermal stability, very low outgassing as well as excellent elastic recovery and good mechanical strength properties and is well suited for both static and select dynamic sealing applications*. A maximum application temperature of 300°C (572°F) is suggested. Ultrapure post-cleaning and packaging is standard for allKalrez® 9100 parts.
DuPont
Delrin® 527UV NC010
Flexural Modulus: 3000.0 - 3000.0 MPa
Delrin® 527UV is a UV-stabilized medium viscosity acetal homopolymer developed for applications in automotive interiors. It represents a dramatic improvement over Delrin® 507 in mechanical performance after prolonged UV exposure and thermal stability.
DuPont
Delrin® SC698 NC010
Flexural Modulus: 3000.0 - 3000.0 MPa
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries. Delrin® SC698 NC010 is a lubricated low viscosity acetal homopolymer, developed for high precision thin-walled parts requiring low wear and low friction with excellent surface aspect.
DuPont
Delrin® 500AF
Flexural Modulus: 2500.0 - 2500.0 MPa
Delrin® 500AF is a medium viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics.Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.
DuPont
BETATECH™ 2029
Applications: Batteries, Other Battery Materials, Electrical & Electronic Systems
Product Families: Conductive Adhesives, Adhesives & Sealants
Chemical Family: Polyurethanes (PU)
End Uses: Batteries
BETATECH™ 2029 is a two component thermal interface material based on a polyurethane technology with a very high thermal conductivity. BETATECH™ 2029 is based on aluminum trihydroxide fillers that lead to a very high thermal conductivity accompanied by a low density. The material can be efficiently applied and the parts can be joined quickly due to a low press-in force. The material is free of silicones.
DuPont
Delrin® 577 BK000
Flexural Modulus: 4600.0 - 4600.0 MPa
Delrin® 577 is a medium viscosity acetal homopolymer (Polyoxymethylene POM) containing 20% glass fiber filler for injection molding. It has very high stiffness, low warpage, and good creep resistance for superior performance at elevated temperature. It contains carbon black for improved weathering.
DuPont
BETASEAL® 1766 EU
Applications: Appliances & Electronics, Body Shop & Repair, Transportation Assembly
Product Families: Structural Adhesives, Adhesives & Sealants
Chemical Family: Polyurethanes (PU)
BETASEAL® 1766 EU is a high viscosity, high modulus, glass bonding adhesive that can be used primerless to paint and glass. Due to its chemistry, it delivers a high initial handling strength to hold the position of the bonded parts. It is a one component, ambient moisture curing, solvent free adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension.
DuPont
Delrin® FG911DP NC010
Flexural Modulus: 3300.0 - 3300.0 MPa
Delrin® FG911DP is a low viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.
DuPont
Kalrez® 6230
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, O-rings
Features: Low Contamination From Extractables, Chemical Resistant, Good Steam Cycling Resistance
End Uses: Semiconductor Applications, O Rings
Color: Black
Kalrez® 6230/6230A* perfluoroelastomer parts are a black product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6230/6230A parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez° 6230/6230A parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability.
DuPont
Kalrez® 6221
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, O-rings
Features: Low Contamination From Extractables, Chemical Resistant, Good Steam Cycling Resistance
End Uses: Semiconductor Applications, O Rings
Color: White
Kalrez® 6221 perfluoroelastomer parts are a white product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6221 parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez® 6221 parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability. Kalrez® 6221 is available as O-rings. For white custom parts, please refer to Kalrez® LS205 parts.
DuPont
Kalrez® Spectrum™ 7375
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals
Features: Good Compressive Strength, Good Mechanical Properties, Good Retention of Properties
End Uses: Semiconductor Applications, Pump Parts
Color: Black
Kalrez® Spectrum™ 7375 perfluoroelastomer parts are an innovative FFKM product based on a patented crosslinking system for chemical process industry applications where broad chemical and water/steam resistance are needed at elevated temperatures. Kalrez® Spectrum™ 7375 parts exhibit excellent compression set resistance, outstanding physical property retention, and good mechanical strength properties. A maximum application temperature of 300°C is suggested.
DuPont
MOLYKOTE® 111 Compound
Applications: Equipment & Parts, Other Electrical & Electronics Applications, Automotive Fluids & Lubricants
Product Families: Lubricants & Oils, Caulks & Sealants, Adhesives & Sealants
Chemical Family: Silicones
MOLYKOTE® 111 Compound is used as a valve lubricant and sealant.
DuPont
Delrin® FG500MXD BLA090
Flexural Modulus: 3400.0 - 3400.0 MPa
Delrin® FG500MXD is a metal- and X-ray-detectable medium viscosity acetal homopolymer for injection molding and extrusion. It has been developed for applications in contact with food. Detection limits need to be determined as a function of the detector and other process variables.
DuPont
Kalrez® Spectrum™ 6380
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, O-rings
Features: Chemical Resistant, Good Mechanical Properties
End Uses: Semiconductor Applications, O Rings
Color: Cream
Kalrez® Spectrum™ 6380 perfluoroelastomers parts are a non-black product developed specifically for chemical processes involving hot, aggressive amines. In addition, it has excellent overall chemical resistance (see chart below). This cream colored product is easily identifiable when selecting an O-ring material for harsh chemical plant services. This material has excellent mechanical properties and is a top choice for both static and dynamic sealing applications. A maximum service temperature of 225°C is suggested while short-term excursions to higher temperatures are permissible.
DuPont
BETASEAL® 1001 EM
Applications: Appliances & Electronics, Body Shop & Repair, Transportation Assembly
Product Families: Structural Adhesives, Adhesives & Sealants
Chemical Family: Polyurethanes (PU)
BETASEAL® 1001 EM is a medium viscosity, high modulus, non conductive, fast curing glass bonding adhesive which requires a primer during the process. It is a one component, ambient moisture curing adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension. BETASEAL® 1001 EM has a 3 hour Safe-Drive-Away-Time, crash tested to FMVSS 212 specification with twin airbags.
DuPont
Delrin® 500CPE NC010
Applications: Sports & Recreation, Consumer Electronics, Other Bonding & Assembly Applications
Product Families: Polyacetals, Engineering & Specialty Polymers
Polymer Name: Polyacetal Homopolymer (POM)
End Uses: Consumer Applications, Automotive Applications, Appliances
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 500CPE (DE20729) is a medium viscosity acetal homopolymer with very low VOC emissions for applications in automotive interiors. It provides good mechanical performances with improved processing, thermal stability and productivity for injection molding.
DuPont
Kalrez® 0090
Applications: Other Packaging & Assembly Applications, Semiconductor Manufacturing, Equipment & Parts
Product Families: Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
End Uses: Semiconductor Applications, Valve Parts, O Rings
Kalrez® 0090 perfluoroelastomer parts deliver durable, reliable sealing solutions for applications requiring excellent rapid gas decompression (RGD) properties as well as high hardness, high modulus properties, and excellent extrusion resistance (even without backup rings). Potential oil and gas applications include downhole equipment such as drilling and completion tools, as well as industrial equipment including pumps, valves and compressors. Kalrez® 0090 has been certified by two independent laboratories to meet rigorous requirements for resistance to RGD. In addition to demonstrated RGD resistance, Kalrez® 0090 seals provide superior performance in regard to chemical and temperature properties. Chemical resistance: Kalrez® 0090 is resistant to chemicals encountered in the oil and gas industry, including sour process streams containing H2S. Broad temperature capability: Kalrez® 0090 retains good physical properties up to temperatures as high as 250°C (482°F) and down to 21°C (5.8°F). Under pressurized conditions, in laboratory tests, Kalrez® 0090 has demonstrated low temperature performance down to 40°C (40°F).


DuPont
BETAFORCE® 2900 TC
Ready to Use Product Type: Conductive Adhesive, 2K (2 component) Adhesive
Application Areas: Batteries
Compatible Substrates & Surfaces: Aluminum, Painted Surfaces, Metal
BETAFORCE® 2900 TC is a thermal conductive two-component polyurethane adhesive, specially developped for battery assembly.
DuPont
Delrin® 527UV BK701
Flexural Modulus: 3000.0 - 3000.0 MPa
Delrin® 527UV is a UV-stabilized medium viscosity acetal homopolymer developed for applications in automotive interiors. It represents a dramatic improvement over Delrin® 507 in mechanical performance after prolonged UV exposure and thermal stability.