331 products found in CASE Ingredients
BETASEAL
BETASEAL® 16100H
Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair
Product Families: Coatings
Chemical Family: Silanes
BETASEAL® 16100H is a solvent-based silane blend type primer. BETASEAL® 16100H is a clear, one-step primer used to promote adhesion to glass and used in conjunction with an approved polyurethane adhesive
BETAFORCE
BETAFORCE® 2800 TC
Applications: Body Shop & Repair, Other Battery Materials, Transportation Assembly
Product Families: Adhesives
Chemical Family: Polyurethanes (PU)
BETAFORCE® 2800 TC is a thermal conductive 2-component polyurethane adhesive, specially developped for battery assembly Very good thermal conductivity Good adhesion to coated metal surfaces Accelerated adhesion at elevated temperatueres Silicon free Free of abrasive fillers Low temperature dependancy of the modulus DuPont Automotive products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Automotive Systems
BETAMATE
BETAMATE® 1480P
Applications: Body Shop & Repair, Transportation Assembly
Product Families: Adhesives
Chemical Family: Epoxy & Epoxy Derivatives
BETAMATE® 1480P is a one-component, heat-curing, epoxy-based structural adhesive especially developed for the body shop. It is capable of bonding oily galvanized, cold-rolled steel, and aluminum. BETAMATE® 1480P has excellent adhesion to automotive steels (include coated steels and pretreated aluminum with good tolerance to oily and dry lubes). BETAMATE® 1480P helps to increase the stiffness and the crash stability of the entire car body with high durability of the adhesive and adhesive bond and corrosion protection due to its sealing capability. It is compatible with other mechanical and thermal joining technique, compatible with the e-coat process and wash-off resistance. Typical applications include bonding of the vehicle body structure and closure hem flange applications.
BETASEAL
BETASEAL® Xpress 30
Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair
Product Families: Adhesives
BETASEAL® Xpress30 is a single component, high modulus non-conductive adhesive with Reinforced Polyisotropic Micro-network (RPM) technology for high initial green strength that enables rapid cross linking to speed bonding, allowing faster minimum drive-away times. BETASEAL® Xpress30 is a cold applied, high modulus and non-conductive (enhances vehicle's structural integrity / passenger comfort with reduced road noise, while reducing GPS / phone / HUD / defroster connection interference). BETASEAL® Xpress30 has industry-leading ease of use application, tooling, decking performance, short cut-off string, crash proven 30 minute minimum drive-away time down to 0°F.
THIXON
THIXON® P-11-EF
Applications: Transportation Assembly
Product Families: Adhesives
THIXON® P-11-EF is a vulcanizing adhesive primer used with all MEGUM® or THIXON® cover coat adhesives for bondingmost elastomers to various substrates. It can also be used as a one coat for bonding polar elastomers and will bondmetal substrates including hot and cold rolled steel, stainless steel alloys, brass, aluminum and zinc plated metals. It is a very good general use primer coat for rubber to metal applications. Providing excellent boiling water and salt spray resistance.
BETAPRIME
BETAPRIME® 5433
Applications: Body Shop & Repair, Transportation Assembly
Product Families: Coatings
Chemical Family: Sulfur-based Compounds
BETAPRIME® 5433 is an adhesion promoting primer for painted and plastic substrates with short and long open time. It is to be used in combination with DuPont Adhesives PUR-Adhesive/sealants. All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.
BETATECH
BETATECH™ 2029
Applications: Other Battery Materials, Electrical & Electronic Systems
Product Families: Adhesives
Chemical Family: Polyurethanes (PU)
BETATECH™ 2029 is a two component thermal interface material based on a polyurethane technology with a very high thermal conductivity. BETATECH™ 2029 is based on aluminum trihydroxide fillers that lead to a very high thermal conductivity accompanied by a low density. The material can be efficiently applied and the parts can be joined quickly due to a low press-in force. The material is free of silicones.
THIXON
THIXON® OSN-2-EF
Applications: Transportation Assembly
Product Families: Adhesives
THIXON® OSN-2-EF is a general purpose one-coat adhesive used for bonding various elastomers to metals, such as hot and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals._x005F THIXON® OSN-2-EF bonds Natural Rubber (NR), Polybutadiene (BR), Polyisoprene (IR), Styrene Butadiene Rubber (SBR), Chloroprene (CR) and Polyacrylate (ACM)._x005F THIXON® OSN-2-EF is also used for post-vulcanization bonding. In addition, THIXON® OSN-2-EF bonds rubber to synthetic fibers such as rayon and polyester. It is a good general purpose rubber to substrate bonding agent that can be used as single coat or two coat system. The use of a ROBOND, THIXON® or MEGUM® primer or a two coat system will provide the best environmental resistance, however THIXON® OSN-2-EF does quite well as a stand alone coating in many general rubber to metal bonding situations.
BETASEAL
BETASEAL® 1766 EU
Applications: Body Shop & Repair, Transportation Assembly, Electronics Adhesives
Product Families: Sealants, Adhesives
Chemical Family: Polyurethanes (PU)
BETASEAL® 1766 EU is a high viscosity, high modulus, glass bonding adhesive that can be used primerless to paint and glass. Due to its chemistry, it delivers a high initial handling strength to hold the position of the bonded parts. It is a one component, ambient moisture curing, solvent free adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension.
THIXON
THIXON® 423 Clear
Applications: Transportation Assembly
Product Families: Adhesives
THIXON® 423 Clear is a vulcanizing adhesive which can be used as a one-coat adhesive or as a covercoat adhesive overTHIXON®403/404 adhesive primer for bonding castable polyurethane to various substrates.THIXON®423 can also be used as a one-coat adhesive for bonding thermoplastic polyurethanes to metal.THIXON®423 can also be used as a protective coating for metal, polyurethane, epoxy, polyester and fiberglass compounds. it is a good one-coat system for thermoplastic urethane to metal bonding with better heat resistance thatTHIXON® 405.
BETAMATE
BETAMATE® 6120
Applications: Body Shop & Repair, Transportation Assembly
Product Families: Adhesives
Chemical Family: Epoxy & Epoxy Derivatives
BETAMATE® 6120 is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It has excellent adhesion for metal substrate (aluminum and steel) applications. BETAMATE® 6120 has excellent adhesion for aluminum bonding with excellent stress durability, high sag resistance, high wash off resistance and exceptionally high -40°C peel strength. Typical applications include bonding of the vehicle body structure and closure hem flange applications.
THIXON
THIXON® 2001-EF
Applications: Transportation Assembly
Product Families: Adhesives
THIXON® 2001-EF is a vulcanizing adhesive that can be used as a one-coat adhesive or as a two-coat system appliedcover THIXON® P-11-EF or THIXON® P-6-EF adhesive primers. It bonds with a wide variety of elastomers, including natural rubber, SBR, chloroprene, EPDM, butyl and nitrile.THIXON® 2001-EF is formulated at the proper viscosity and solids content to give the desired dry film thickness for maximum bonding in one coat brushing or roller coat applications. It is a vulcanizing adhesive that can be used as a one-coat adhesive or as a two-coat system applied over THIXON® P-11-EF or P-6-EF adhesive primers.THIXON® 2001-EF represents the highest reactivity of any of the cover coat adhesives in our product line and is used to pick up difficult to bond rubber compounds
THIXON
THIXON® P-11
Applications: Transportation Assembly
Product Families: Adhesives
THIXON P-11 is a solvent-based primer, used in combination with MEGUM or THIXON cover coats. THIXON P-11 can also be used as a one-coat adhesive for the bonding of polar elastomers (NBR, AEM, ACM).COMPOSITION: THIXON P-11 consists of reactive polymers and pigments in methyl isobutyl ketone (MIBK). It is formulated without reportable levels of lead or other toxic heavy metals.ENVIRONMENTAL RESISTANCE: Rubber-to-metal bonding systems using THIXON P-11 display resistance to severe environmental exposures such as humidity and corrosion. Properly prepared bonds will also resist heat, salt fog, oil and water exposures.
BETASEAL
BETASEAL® 8000-1F
Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair
Product Families: Adhesives
Chemical Family: Polyurethanes (PU)
BETASEAL® 8000-1F is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions._x005F _x005F BETASEAL® 8000-1F is a cold processable, medium viscosity, low modulus adhesive with excellent UV stability attributes. It is primerless to paint on automotive paints.
BETASEAL
BETASEAL® 1758-1F
Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair
Product Families: Adhesives
Chemical Family: Polyurethanes (PU)
BETASEAL® 1758-1F is a one-component, moisture-curing, solvent-free adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions._x005F BETASEAL® 1758-1F is a warm and cold processable, high viscosity, medium modulus, glass bonding adhesive that can be used primerless on paint. Warm application of BETASEAL® 1758-1F delivers a medium initial handling strength to hold the position of the bonded parts.
THIXON
THIXON® 6110F
Applications: Transportation Assembly
Product Families: Adhesives
THIXON® 6110F is a vulcanizing adhesive used to thermally laminate polypropylene copolymers to substrates such as metal, glass and wood. This product is a one-part dispersion and must be mixed well before and during use. Cohesive failure bonds are typical for most polypropylene copolymer materials.
MEGUM
MEGUM® 3290-1LD
Applications: Transportation Assembly
Product Families: Adhesives
MEGUM® 3290-1LD is a vulcanizing adhesive that can be used as a one-coat adhesive for the bonding of fluorocarbon rubbers to metals and other solid materials under vulcanization conditions. It is suitable for all common curing systems including bisphenolic and peroxide curing._x005F MEGUM® 3290-1LD gives an outstanding resistance to external influences and high temperatures, and may be used with all conventional vulcanization methods. It is a rubber to substrate bonding system with more aggressive cross-linking chemistry to give good environmental resistance in the finished good.
THIXON
THIXON® OSN-2-EF-VV
Applications: Transportation Assembly
Product Families: Adhesives
THIXON® OSN-2-EF-VV is a general purpose one-coat adhesive for bonding various elastomers to metals, such as hot and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals. Formulated without reportable levels of lead (or other heavy metals), chlorinated solvents and ozone-depleting chemicals._x005F THIXON® OSN-2-EF-VV can bond Natural Rubber (NR), Polybutadiene (BR), Polyisoprene (IR), Chlorosulfonated polyethylene (CSM), Styrene Butadiene Rubber (SBR), Chloroprene (CR) and Polyacrylate (ACM)._x005F THIXON® OSN-2-EF-VV is also used for post-vulcanization bonding. In addition, product bonds rubber to synthetic fibers such as rayon and polyester. It is a good general purpose rubber to substrate bonding agent that can be used as single coat or two coat system. The use of a ROBOND, THIXON® or MEGUM® primer or a two coat system will provide the best environmental resistance however THIXON® OSN-2-EF-VV does quite well as a stand alone coating in many general rubber to metal bonding situations._x005F THIXON® OSN-2-EF-VV is designed for faster curing cycles and possibly lower curing temperatures.
MEGUM
MEGUM® 3290-1
Applications: Transportation Assembly
Product Families: Adhesives
MEGUM® 3290-1 is a one-coat bonding agent for bonding fluorocarbon rubbers to metals and other rigid substrates during volcanization. Also suitable for other common curing systems including bisphenolic and peroxide curing._x005F MEGUM® 3290-1 is a rubber to substrate bonding system with more aggressive cross-linking chemistry to give good environmental resistance in the finished good.
BETAPRIME
BETAPRIME® 5500
Applications: Body Shop & Repair, Transportation Assembly
Product Families: Coatings
Chemical Family: Metallic Salts
BETAPRIME® 5500 is a one-step primer with short open time which can be used without silane wipe pretreatment. It is an adhesion promoting primer for laminated glass with enamel layer inside and enamel substrates. BETAPRIME® 5500 is to be used in combination with DuPont Adhesives PUR-Adhesive/sealants. All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.
BETASEAL
BETASEAL® 1815-1F
Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair
Product Families: Adhesives
Chemical Family: Polyurethanes (PU)
BETASEAL® 1815-1F is a one-component, moisture-curing, solvent-free adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETASEAL® 1815-1F is a warm and cold processable, high viscosity, medium modulus, glass bonding adhesive that can be used primerless on paint. Warm application of BETASEAL® 1815-1F delivers a medium initial handling strength to hold the position of the bonded parts.
BETASEAL
BETASEAL® 1001 EM
Applications: Body Shop & Repair, Transportation Assembly, Electronics Adhesives
Product Families: Sealants, Adhesives
Chemical Family: Polyurethanes (PU)
BETASEAL® 1001 EM is a medium viscosity, high modulus, non conductive, fast curing glass bonding adhesive which requires a primer during the process. It is a one component, ambient moisture curing adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension. BETASEAL® 1001 EM has a 3 hour Safe-Drive-Away-Time, crash tested to FMVSS 212 specification with twin airbags.
THIXON
THIXON® 511-EF
Applications: Transportation Assembly
Product Families: Adhesives
THIXON® 511-EF is a vulcanizing cover coat adhesive used with THIXON® or MEGUM® adhesive primers for bondingnatural rubber, SBR, EPDM, chloroprene, chlorosulfonated-polyethylene, butyl, and nitrile rubbers. It is formulated without reportable levels of lead (or other heavy metals), chlorinated solvents and ozone depleting chemicals.THIXON® 511-EF can also be used as a splice adhesive for bonding uncured rubber compounds to previously cured rubbers, and as an intermediate adhesive with a tie coat adhesive for open steam or autoclave curing tank linings. It is agood long-standing cover coat adhesive that has been used in very demanding application in building, automotive andi ndustrial applications. Along with the appropriate THIXON® OR MEGUM® Primers, this system will provide robust performance on an economical basis.
BETAPRIME
BETAPRIME® 5404
Applications: Body Shop & Repair, Transportation Assembly
Product Families: Coatings
Chemical Family: Magnesium & Magnesium Compounds, Magnesium Hydroxides
BETAPRIME® 5404 is an adhesion promoting primer for painted and plastic substrates with a short open time. BETAPRIME® 5404 is to be used in combination with DuPont Adhesives PUR-Adhesive/sealants. All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.
BETASEAL
BETASEAL® 15506KN
Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair
Product Families: Adhesives
Chemical Family: Polyurethanes (PU)
BETASEAL® 15506KN is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETASEAL® 15506KN is a cold processable, high viscosity, medium modulus, fast-curing glass bonding adhesive that can be used primerless on paint.
BETATECH
BETATECH™ 2028
Applications: Other Battery Materials, Electrical & Electronic Systems
Product Families: Adhesives
BETATECH™ 2028 is a two component thermal interface material based on a polyurethane technology with a high thermal conductivity. BETATECH™ 2028 is based on aluminum trihydroxide fillers that lead to a very high thermal conductivity accompanied by a low density. The material can be efficiently applied and the parts can be joined quickly due to a low press-in force. The material is free of silicones.
BETAWIPE
BETAWIPE® 4800
Applications: Body Shop & Repair
Product Families: Coatings
BETAWIPE® 4800 is a transparent solvent-based adhesion promoting activator for e-coated surfaces and plastics including carbon fiber composits CFK, with short open time. It is optimised for pretreament of CFK to CFK or CFK to E-coat bondings. BETAWIPE® 4800 is to be used as a adhesion promoter in combination with BETAMATE® and BETAFORCE® two components PUR-adhesive/sealants. All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives
BETAWIPE
BETAWIPE® HYDRO 2
Applications: Body Shop & Repair
Product Families: Coatings
BETAWIPE® HYDRO 2 is a water based transparent adhesion promoter for laminated glass with enamel layer inside and enamel substrates, with short open time. It is to be used in combination with DuPont Adhesives uniwipe PUR-adhesive/sealants. All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives
BETAMATE
BETAMATE® 7120-1F
Applications: Body Shop & Repair, Transportation Assembly
Product Families: Adhesives
BETAMATE® 7120-1F is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETAMATE® 7120-1F is a cold processable, medium viscosity, low modulus adhesive with excellent UV stability attributes. It is primerless to paint on automotive paints.
BETASEAL
BETASEAL® 57302KN
Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair
Product Families: Adhesives
BETASEAL® 57302KN is a one-component, fast-curing, high viscosity adhesive suitable for stationary glass bonding application. It is resistant to extended outdoor weathering without losing its adhesion and physical characteristics.
