Company logo
producer
DuPont
Search:
287 products found for Adhesives in CASE Ingredients
With TDS
With SDS
Betamate® 1486 product card banner

DuPont

BETAMATE® 1486

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 1486 is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It is capable of bonding all grades of automotive steel. BETAMATE® 1486 has low temperature cure in the e-coat oven, excellent low temperature impact performance, good processability and exceptional toughness for an epoxy adhesive at -40°C and at high rates of test speed. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betafill® 10200 product card banner

DuPont

BETAFILL® 10200

Brand: BETAFILL

Applications: Body Shop & Repair, Transportation Assembly, Sealants

Product Families: Sealants, Adhesives

Chemical Family: Polyurethanes (PU)

BETAFILL® 10200 is a one-component, high viscosity, moisture curing polyurethane seam sealant with permanent elasticity and good adhesion to different substrates. It allows a faster over-paintability, excellent seam sealer for body repair (sealing, filling and finishing). BETAFILL® 10200 combines medium strength bonding and sealing properties in a wet on wet one-step operation. It can be abraded and is over-paintable with most paint systems.

Betaseal® U838 product card banner

DuPont

BETASEAL® U838

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

BETASEAL® U838 is a one-component, conventional cure adhesive._x005F BETASEAL® U838 eliminates steps and speeds installations by incorporating glass primer into the urethane._x005F BETASEAL® U838 can be used for structurally bonded or direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glass. Other uses include attaching hardware to glass and backfilling to reinstall reveal moldings or other trim.

Megum® W-9301 product card banner

DuPont

MEGUM® W-9301

Brand: MEGUM

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® W-9301 is a waterborne primer adhesive used in combination with a MEGUM®, ROBOND® or THIXON® adhesive cover coats, for bonding rubber compounds to metals and other rigid substrates during vulcanisation. MEGUM® W-9301 features good resistance against various fluids, e.g. brake, cooling and hydraulic fluids. Due to the formation of comparatively flexible film, this primer is especially suitable for rubber-to-metal parts which are being shaped after vulcanisation.

Liveo™ Bio-psa 7-4602 product card banner

DuPont

Liveo™ BIO-PSA 7-4602

Brand: Liveo

Product Families: Adhesives

Chemical Family: Silicones

Liveo™ BIO-PSA 7-4602 is a Standard pressure sensitive adhesive specifically designed for transdermal drug delivery systems. These adhesives are permeable to many drugs and excipients and are designed to adhere drug-loaded systems to the skin. Liveo™ BIO-PSA Standard Silicone Adhesives are produced through a condensation reaction of a silanol endblocked polydimethylsiloxane (PDMS) with a silicate resin.

Megum® 3276 product card banner

DuPont

MEGUM® 3276

Brand: MEGUM

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® 3276 is a vulcanizing adhesive primer used with MEGUM® or THIXON® cover coat adhesives for bonding most elastomers to various substrates._x005F MEGUM® 3276 is also used as a one-coat for bonding polar rubber compounds such as nitrile or polychloroprene to metal or other materials. Due to the unique chemical composition, this adhesive has shown extraordinary resistance to heat and hot water resistance under very demanding conditions. Either as a one-coat bonding polar rubber compounds or in conjunction with one of the fine THIXON® or MEGUM® cover coats it is a very durable primer adhesive.

Megum® 128 product card banner

DuPont

MEGUM® 128

Brand: MEGUM

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® 128 is a general purpose cover coat adhesive used for bonding rubber compounds to metals and other rigid substrates during vulcanization. In rubber to metal bonding applications, MEGUM® 128 requires a MEGUM® or THIXON® primer. Other rigid substrates such as thermoplastics and other metal alloys may not require a primer. However, environmental resistances of the final application need to be considered._x005F MEGUM® 128 consists of reactive polymers and pigments in xylene. It is formulated without reportable levels of lead or other heavy metals._x005F MEGUM® or THIXON® primers adhere to hot and cold rolled steel, stainless steel, aluminum, brass and thermoplastics such as polyamides and polyesters._x005F MEGUM® 128 has well-balanced performance based on standard industry test specifications (ASTM D429-WDK2000)._x005F MEGUM® 128 has good boiling water, heat and pre-bake resistance._x005F MEGUM® 128 enables global standardization and consolidation. Based on the chemistry, MEGUM® 128 displays low mold fouling properties.

Betaseal® 15425N product card banner

DuPont

BETASEAL® 15425N

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

BETASEAL® 15425N is a one-component, fast-curing, high viscosity adhesive suitable for stationary glass bonding application. It is resistant to extended outdoor weathering without losing its adhesion and physical characteristics.

Betamate® 1005G product card banner

DuPont

BETAMATE® 1005G

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 1005G is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It is capable of bonding oily galvanized, cold-rolled steel, and aluminum. BETAMATE® 1005G has excellent process and storage stability and excellent adhesion to automotive steels (including coated steels and pretreated aluminum with good tolerance to oil and dry lubes). BETAMATE® 1005G helps to increase the stiffness of the entire car body, exhibits high durability of the adhesive and adhesive bond and gives corrosion protection due to its sealing capability. It is compatible with other mechanical and thermal joining techniques, compatible with the e-coat process and precurable. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betamate® 1620 Mb product card banner

DuPont

BETAMATE® 1620 MB

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 1620 MB is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It is capable of bonding oily galvanized, cold-rolled steel, and aluminum. BETAMATE® 1620 MB has excellent adhesion to automotive steels (including coated steels and pretreated aluminum with good tolerance to oily and dry lubes). BETAMATE® 1620 MB helps to increase the stiffness and the crash stability of the entire car body with high durability of the adhesive and adhesive bond and corrosion protection due to its sealing capability. It is compatible with other mechanical and thermal joining techniques, compatible with the e-coat process, precurable and pregelable up to four weeks open time in the uncured bond. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betamate® 1041G Us product card banner

DuPont

BETAMATE® 1041G US

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 1041G US is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It is capable of bonding oily galvanized steel. BETAMATE® 1041G US has excellent structrual properties and mechanical properties for BIW, good impact performance, wash-off resistant with excellent long term durability. it increases body stiffness, provides good impact-peel strength as measured by ISO 11343. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betamate® 1496 product card banner

DuPont

BETAMATE® 1496

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 1496 is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It is capable of bonding oily galvanized, cold-rolled steel, and aluminum. BETAMATE® 1496 has excellent adhesion to automotive steels (including coated steels and pretreated aluminum with good tolerance to oily and dry lubes). BETAMATE® 1496 helps to increase the stiffness and the crash stability of the entire car body with high durability of the adhesive and adhesive bond and corrosion protection due to its sealing capability. It is compatible with other mechanical and thermal joining techniques, compatible with the e-coat process, wash-off resistant and precurable and pregelable up to six weeks open time in the uncured bond. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betamate® Flex product card banner

DuPont

BETAMATE® FLEX

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® Flex is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It is capable of bonding oily galvanized, cold-rolled steel, and aluminum. BETAMATE® FLEX combines the mechanical performance levels of epoxies with high flexibilty, very high elongation at break (30%), low modulus and low viscosity. It reduces read through, contains glass beads for gap management, enhances mechanical fastening for locking hem applications and dissimilar material bonding. BETAMATE® FLEX us compatible with the electrocoat process and wash-off resistant. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betamate® 4601 product card banner

DuPont

BETAMATE® 4601

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 4601 is a one-component, heat-curing, epoxy-based adhesive developed for the body shop. It is capable of bonding Alcan pretreated aluminum. BETAMATE® 4601 has excellent adhesion for aluminum bonding, excellent stress durability, high sag resistance, high wash off resistance and exceptionally high -40°C peel strength Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betaseal® U-400hv product card banner

DuPont

BETASEAL® U-400HV

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

BETASEAL® U-400HV is a one-component, conventional-cure adhesive._x005F BETASEAL® U-400HV is designed for structurally bonded or direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glass. Other uses include attaching hardware to glass and backfilling to install reveal moldings or other trim.

Betamate® Flex 100F product card banner

DuPont

BETAMATE® Flex 100F

Brand: BETAMATE

Applications: Transportation Assembly, Body Shop & Repair

Product Families: Adhesives

BETAMATE® Flex 100F is a one component, heat curing, elastic adhesive designed for body shop application. It is capable of bonding oily galvanized steel, cold rolled steel, aluminum, magnesium and CFRP.

Liveo™ Mg-2502 product card banner

DuPont

Liveo™ MG-2502

Brand: Liveo

Product Families: Adhesives

Chemical Family: Silicones

Solvent based silicone pressure sensitive adhesive for adhering medical devices to the body. It is supplied as solvent based material. It can be coated as supplied, and then will leave an adhesive layer after solvent evaporation.

Liveo™ Bio-psa Srs7-4501 product card banner

DuPont

Liveo™ BIO-PSA SRS7-4501

Brand: Liveo

Product Families: Adhesives

Chemical Family: Silicones

Liveo™ BIO-PSA SRS7-4501 is a Standard Reduced Silanol BIO-PSA, specifically designed for transdermal drug delivery systems. Liveo™ BIO-PSAs adhesives are permeable to many drugs and excipients and are designed to adhere drug-loaded systems to the skin. Liveo™ BIO-PSA Standard Silicone Adhesives are produced through a condensation reaction of a silanol endblocked polydimethylsiloxane (PDMS) with a silicate resin.

Liveo™ Mg 7-9850 Soft Skin Adhesive Kit (A & B) product card banner

DuPont

Liveo™ MG 7-9850 Soft Skin Adhesive Kit (A & B)

Brand: Liveo

Product Families: Adhesives

Chemical Family: Silicones

Liveo™ MG 7-9850 Soft Skin Adhesive Kit (A & B) is a soft elastomeric silicone adhesive for adhering medical devices to the skin with low adhesion force and gentle removal.

Betamate® 7185-1F product card banner

DuPont

BETAMATE® 7185-1F

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Polyurethanes (PU)

BETAMATE® 7185-1F is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETAMATE® 7185-1F is a warm and cold processable, high viscosity, medium modulus, glass bonding adhesive that can be used primerless on paint. When BETAMATE® 7185-1F is applied warm, it delivers a medium initial handling strength to hold the position of the bonded parts.

Thixon® 550 product card banner

DuPont

THIXON® 550

Brand: THIXON

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® 550 is a cover coat adhesive used with THIXON® adhesive primers for bonding EPDM, NR, HNBR, NBR, CR, IIR,and SBR compounds during vulcanization. It can also be used as a single coat adhesive for bonding synthetic elastomers to cord or fiber.THIXON® 550 is designed for hard to bond EPDM rubber compounds along with RFL treated synthetic fibers.

Megum® W-7025 product card banner

DuPont

MEGUM® W-7025

Brand: MEGUM

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® W-7025 is a waterborne-based seal adhesive for bonding NBR, HNBR, and XNBR compounds. There is no chlorinated polymers in the make up of this bonding system giving the optimum corrosion resistance.

Thixon® 403/404 product card banner

DuPont

THIXON® 403/404

Brand: THIXON

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® 403/404 is a two-component adhesive primer used as a one-coat adhesive for bonding castable polyurethaneand thermoplastic polyurethane at low temperatures.THIXON® 403/404 can also be used with THIXON® 405, 423 or 412/415 cover-coat adhesives.THIXON® 403/404 bonds substrates such as metal, wood, nylon, particle board, plastics, epoxy, cement, sintered metalsand alloys.

Megum® 15637 product card banner

DuPont

MEGUM® 15637

Brand: MEGUM

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® 15637 is a solvent-based one-coat adhesive for the bonding of polar elastomers to metal or other rigid substrates during vulcanization.

Betaseal® 15955N product card banner

DuPont

BETASEAL® 15955N

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

BETASEAL® 15955N is a one-component, fast-curing, high viscosity adhesive suitable for stationary glass bonding application. It is resistant to extended outdoor weathering without losing its adhesion and physical characteristics.

Betaseal® 16800 product card banner

DuPont

BETASEAL® 16800

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 16800 is a high modulus, primerless to paint, one-component, fast-curing, and high viscosity urethane adhesive. BETASEAL® 16800 is suitable for stationary glass bonding when used with the appropriate primers. It is resistant to extended outdoor weathering without losing its adhesion and physical characteristics.

Betaseal® 1989 product card banner

DuPont

BETASEAL® 1989

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

BETASEAL® 1989 is a warm processable, high viscosity, high modulus, low conductive glass bonding adhesive can be used primerless on paint and glass._x005F _x005F It should be combined with a clear activator developed for Uniwipe Adhesives (BETAWIPE® 6600T or BETAWIPE® Hydro 2) on ceramic coated glass. It is a one component, moisture curing, solvent free adhesive with excellent sag and bead stability based on polyurethane chemistry. The BETASEAL® 1989 adhesive cures with environmental moisture and skin formation and curing is dependent on humidity, temperature and application dimensions._x005F _x005F All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.

Betaseal® 1758P product card banner

DuPont

BETASEAL® 1758P

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1758P is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETASEAL® 1758P is a cold processable, high viscosity, low modulus adhesive used for mainly lip applications (PAAS) on glasses instead of PU encapsulation. If BETASEAL® 1758P is used for glass bonding, a paint primer is required during the process.

Betamate® 1496F product card banner

DuPont

BETAMATE® 1496F

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 1496F is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It is capable of bonding oily galvanized, cold-rolled steel, and aluminum. BETAMATE® 1496F has excellent adhesion to automotive steels (including coated steels and pretreated aluminum with good tolerance to oily and dry lubes). BETAMATE® 1496F helps to increase the stiffness and the crash stability of the entire car body with high durability of the adhesive and adhesive bond and corrosion protection due to its sealing capability. It is compatible with other mechanical and thermal joining techniques, compatible with the e-coat process, wash-off resistant and precurable and pregelable up to six weeks open time in the uncured bond. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betaseal® 15845N product card banner

DuPont

BETASEAL® 15845N

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

BETASEAL® 15845N is a one-component, fast-curing, high viscosity adhesive suitable for stationary glass bonding application. BETASEAL® 15845N is It is resistant to extended outdoor weathering without losing its adhesion and physical characteristics.

Betaseal® 58702Sfhn product card banner

DuPont

BETASEAL® 58702SFHN

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

BETASEAL® 58702SFHN is a one-component, fast-curing, low viscosity adhesive that is solvent-free suitable for stationary glass bonding and is primerless to most glass substrates. It is resistant to extended outdoor weathering without losing its adhesion and physical characteristics.

Betaseal® 15685N product card banner

DuPont

BETASEAL® 15685N

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 15685N is a primerless to paint, one-component, fast-curing, high viscosity urethane adhesive.

Betaseal® 1125-1F product card banner

DuPont

BETASEAL® 1125-1F

Brand: BETASEAL

Applications: Body Shop & Repair, Transportation Assembly, Electronics Adhesives

Product Families: Sealants, Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1125-1F is a High viscosity, Medium modulus, Non-conductive glass and trim bonding adhesive which can be used primerless on paint for selected paint technologies. It has excellent UV stability and can be used for gap filling applications on commercial vehicals. It is a one component, ambient moisture curing, solvent free adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension.

Betaseal® U-418 product card banner

DuPont

BETASEAL® U-418

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

BETASEAL® U-418 is a one-component, fast-curing, high viscosity adhesive suitable for stationary glass bonding and is primerless to most glass substrates. It is resistant to extended outdoor weathering without losing its adhesion and physical characteristics.

Liveo™ Bio-psa 7-4560 product card banner

DuPont

Liveo™ BIO-PSA 7-4560

Brand: Liveo

Product Families: Adhesives

Chemical Family: Silicones

Liveo™ BIO-PSA 7-4560 is a standard hotmelt silicone adhesive, specifically designed for transdermal drug delivery systems. It can be melted for coating, and then will return to a generally flowless state upon cooling. Liveo™ BIO-PSAs adhesives are permeable to many drugs and excipients and are designed to adhere drug-loaded systems to the skin. Liveo™ BIO-PSA 7-4560 is produced through a condensation reaction of a silanol endblocked polydimethyl-siloxane (PDMS) with a silicate resin. The addition of a PDMS plasticizer to the condensate provides the adhesive’s hot melt characteristics.

Liveo™ Mg-2401 product card banner

DuPont

Liveo™ MG-2401

Brand: Liveo

Product Families: Adhesives

Chemical Family: Silicones

Solvent based silicone pressure sensitive adhesive for adhering medical devices to the body. It is supplied as solvent based material. It can be coated as supplied, and then will leave an adhesive layer after solvent evaporation.