Company logo
producer
DuPont
Search:
287 products found for Adhesives in CASE Ingredients
With TDS
With SDS
Liveo™ Mg-2402 product card banner

DuPont

Liveo™ MG-2402

Brand: Liveo

Product Families: Adhesives

Chemical Family: Silicones

Solvent based silicone pressure sensitive adhesive for adhering medical devices to the body. It is supplied as solvent based material. It can be coated as supplied, and then will leave an adhesive layer after solvent evaporation.

Liveo™ Bio-psa Ac7-4302 product card banner

DuPont

Liveo™ BIO-PSA AC7-4302

Brand: Liveo

Product Families: Adhesives

Chemical Family: Silicones

Liveo™ BIO-PSA AC7-4302 is an Amine Compatible pressure sensitive adhesive specially designed for transdermal drug delivery systems, and for compatibility with amine-functional drugs, or excipients. AC7-4302 is similar to 7-4302 and has tighter specification ranges for volatile content, viscosity and complex viscosity. Liveo™ BIO-PSAs adhesives are permeable to many drugs and excipients and are designed to adhere drug-loaded systems to the skin. Amine compatible BIO-PSAs are produced through a condensation reaction of a silanol endblocked polydimethylsiloxane (PDMS) with a silicate resin. The residual silanol functionality is then capped with trimethylsiloxy groups to yield a chemically stable amine-compatible adhesive.

Thixon® Osn-2-ef-v product card banner

DuPont

THIXON® OSN-2-EF-V

Brand: THIXON

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® OSN-2-EF-V is a general purpose one-coat adhesive for bonding various elastomers to metals, such as hot and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals. Formulated without reportable levels of lead (or other heavy metals), chlorinated solvents and ozone-depleting chemicals._x005F THIXON® OSN-2-EF-V can bond Natural Rubber (NR), Polybutadiene (BR), Polyisoprene (IR), Chlorosulfonated polyethylene (CSM), Styrene Butadiene Rubber (SBR), Chloroprene (CR) and Polyacrylate (ACM)._x005F THIXON® OSN-2-EF-V is also used for post-vulcanization bonding. In addition, product bonds rubber to synthetic fibers such as rayon and polyester. It is a good general purpose rubber to substrate bonding agent that can be used as single coat or two coat system. The use of a ROBOND, THIXON® or MEGUM® primer or a two coat system will provide the best environmental resistance however THIXON® OSN-2-EF-V does quite well as a stand alone coating in many general rubber to metal bonding situations._x005F THIXON® OSN-2-EF-V is designed for faster curing cycles and possibly lower curing temperatures.

Thixon® 532-A-ef product card banner

DuPont

THIXON® 532-A-EF

Brand: THIXON

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® 532-AEF is a general-purpose cover coat adhesive, when used in conjunction with a primer, bonds rubber tometal, such as hot and cold rolled steel, stainless steel alloys, brass, aluminum and zinc plated metals during vulcanization molding.THIXON® 532-AEF can be used with a primer to enhance metal adhesion and long term environmental resistance.THIXON® 532-AEF consists of reactive polymers and pigments in a mixture of xylenes and toluene. It is formulated without reportable levels of lead or other heavy metals, chlorinated solvents and ozone-depleting chemicals. This product has been designed for bonding various compounds used in NVH applications.MEGUM® or THIXON® adhesive primers are used to adhere to metals such as hot and cold rolled steel, stainless steel,aluminum and brass prior to applying adhesive. These same primers can be used to adhere to thermoplastics such as polyamides and polyesters.

Megum® W 7044 product card banner

DuPont

MEGUM® W 7044

Brand: MEGUM

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® W 7044 is a general purpose water-borne rubber to substrate bonding system for wheel bearing seals. It shows durable adhesion to a variety of metal substrates and very good environmental resistance.

Megum® 5386 product card banner

DuPont

MEGUM® 5386

Brand: MEGUM

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® 5386 general purpose cover coat adhesive used for bonding rubber compounds to metals and other rigid substrates during vulcanization. This product is especially suitable for bonding both difficult to bond compounds and soft compounds._x005F MEGUM® or THIXON® adhesive primers are used to adhere to metals such as hot and cold rolled steel, stainless steel, aluminum and brass prior to applying MEGUM® 5386. These same primers can be used to adhere to thermoplastics such as polyamides and polyesters. This product is especially suitable for bonding both difficult to bond compounds and soft compounds used in NVH applications.

Thixon® P-21 product card banner

DuPont

THIXON® P-21

Brand: THIXON

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® P-21 is a vulcanizing adhesive primer used with all MEGUM® or THIXON® cover coat adhesives for bondingmost elastomers to various substrates. It can also be used as a one coat for bonding polar elastomers and will bondmetal substrates including hot and cold rolled steel, stainless steel alloys, brass, aluminum and zinc plated metals. Thismaterial is one of the most robust economical choices for general multi-use primer coat applications. It provides REACH compliance along meeting some very demanding application conditions including but not limited to salt spray, boilingwater and glycol resistance.

Thixon® 409 product card banner

DuPont

THIXON® 409

Brand: THIXON

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® 409 by DuPont is commonly used as Bonding Adhesive for a variety of applications in Automotive.

Betamate® 120 product card banner

DuPont

BETAMATE® 120

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 120 has lower viscosity for ease of appication, good wash-off resistance and excellent wedge impact peel strength. It is a durable adhesion to various substrates with enhanced corrosion resistance. BETAMATE® 120 has low temperature cure in the e-coat oven, excellent low temperature impact performance, good processability and exceptional toughness for an epoxy adhesive at -40°C and at high rates of test speed. It can be used in the car to increase the operation durability, the crash performance and the body stiffness.

Betaseal® 16009N product card banner

DuPont

BETASEAL® 16009N

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

BETASEAL® 16009N is a primerless to paint, one-component, fast-curing, high viscosity adhesive suitable for stationary glass bonding application when used with the appropriate glass primers. BETASEAL® 16009N can be used in conjunction with BETASEAL® 16100A. The system is It is resistant to extended outdoor weathering without losing its adhesion and physical characteristics.

Betamate® 6180 product card banner

DuPont

BETAMATE® 6180

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 6180 is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It has excellent adhesion for metal substrate (aluminum and steel) applications. BETAMATE® 6180 has excellent adhesion for aluminum bonding with excellent stress durability, high sag resistance, high wash off resistance and exceptionally high -40°C peel strength. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betamate® 1822 product card banner

DuPont

BETAMATE® 1822

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 1822 is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It is capable of bonding oily galvanized, cold-rolled steel, and aluminum. BETAMATE® 1822 has excellent process and storage stability and excellent adhesion to automotive steels (including coated steels, high-strength steel, pretreated aluminum and composites with good tolerance to oily and dry lubes). BETAMATE® 1822 helps to increase the stiffness and the crash stability of the entire car body with high durability of the adhesive and adhesive bond and corrosion protection due to its sealing capability. It is compatible with other mechanical and thermal joining techniques, compatible with the e-coat process, wash-off resistance and precurable up to six weeks open time in the uncured bond. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betamate® 1494 product card banner

DuPont

BETAMATE® 1494

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 1494 is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It is capable of bonding oily galvanized, cold-rolled steel, and aluminum. BETAMATE® 1494 has excellent adhesion to automotive steels (including coated steels and pretreated aluminum with good tolerance to oily and dry lubes). BETAMATE® 1494 helps to increase the stiffness and the crash stability of the entire car body with high durability of the adhesive and adhesive bond and corrosion protection due to its sealing capability. It is compatible with other mechanical and thermal joining techniques, compatible with the e-coat process, wash-off resistant and precurable and pregelable up to six weeks open time in the uncured bond. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betamate® 1493 product card banner

DuPont

BETAMATE® 1493

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 1493 is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It is capable of bonding oily galvanized, cold-rolled steel, and aluminum. BETAMATE® 1493 has excellent adhesion to automotive steels (including coated steels and pretreated aluminum with good tolerance to oily and dry lubes). BETAMATE® 1493 helps to increase the stiffness and the crash stability of the entire car body with high durability of the adhesive and adhesive bond and corrosion protection due to its sealing capability. It is compatible with other mechanical and thermal joining techniques, compatible with the e-coat process, wash-off resistant and precurable. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betaseal® 15830E product card banner

DuPont

BETASEAL® 15830E

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 15830E is a one-component, solvent-free, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETASEAL® 15830E is a cold processable, low viscosity, medium modulus, fast-curing glass bonding adhesive that can be used primerless on paint.

Betamate® 4600F product card banner

DuPont

BETAMATE® 4600F

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 4600F is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It is capable of bonding aluminum. BETAMATE® 4600F has excellent adhesion to pretreated aluminum with good tolerance to oily and dry lubes. BETAMATE® 4600F helps to increase the stiffness and the crash stability of the entire car body with high durability of the adhesive and adhesive bond and corrosion protection due to its sealing capability. It is compatible with other mechanical and thermal joining techniques, compatible with the e-coat process, wash-off resistant and precurable up to four weeks open time in the uncured bond. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betamate® 1044-3 product card banner

DuPont

BETAMATE® 1044-3

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 1044-3 is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It is capable of bonding oily galvanized, cold-rolled steel without a primer. BETAMATE® 1044-3 is resistant to degradation and substrate corrosion on environmental aging. It has high sag resistance, high wash off resistance and exceptionally high 40°C peel strength. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betamate® 1620S Us product card banner

DuPont

BETAMATE® 1620S US

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 1620S US is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It is capable of bonding oily galvanized steel. BETAMATE® 1620S US provides excellent long term durability, improved uncured humidity resistance. BETAMATE® 1620S US can be dispensed at ambient temperatures and has excellent impact-peel strength. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betamate® 73305Gb product card banner

DuPont

BETAMATE® 73305GB

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 73305GB is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It is capable of bonding oily galvanized, cold-rolled steel, and aluminum. BETAMATE® 73305GB accepts E-coat primer, continuous coating of ecoat over adhesive for improved corrosion, sag resistance and good peel strength. BETAMATE® 73305GB has glass beads for gap management and gives mechanical fastening for locking hem applications. BETAMATE® 73305GB reduces the need for other fastening methods such as induction cure or hot air. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betaseal® 1986 product card banner

DuPont

BETASEAL® 1986

Brand: BETASEAL

Applications: Body Shop & Repair, Transportation Assembly, Electronics Adhesives

Product Families: Sealants, Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1986 is a high viscosity, High modulus, Low conductive glass bonding adhesive that can be used primerless on paint. Due to its chemistry, It delivers high initial handlingstrength to hold the position of the bonded parts. It is a one component, ambient moisture curing, solvent free adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension.

Betaseal® 1961 product card banner

DuPont

BETASEAL® 1961

Brand: BETASEAL

Applications: Body Shop & Repair, Transportation Assembly, Electronics Adhesives

Product Families: Sealants, Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1961 is a high viscosity, high modulus, glass bonding adhesive that can be used primerless to paint and glass. Due to its chemistry, it delivers a high initial handling strength to hold the position of the bonded parts. It is a one component, ambient moisture curing, solvent free adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension.

Betaseal® 1720-1F product card banner

DuPont

BETASEAL® 1720-1F

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1720-1F is a one-component, moisture-curing, solvent-free adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETASEAL® 1720-1F is a warm processable, high viscosity, high modulus, glass bonding adhesive that can be used primerless on paint. BETASEAL® 1720-1F delivers a high initial handling strength to hold the position of the bonded parts.

Betaseal® 1910-1F product card banner

DuPont

BETASEAL® 1910-1F

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1910-1F is a one-component, moisture-curing, solvent-free adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions._x005F BETASEAL® 1910-1F is a warm or cold processable, high viscosity, medium modulus, glass bonding adhesive that can be used primerless on paint and glass. It should be combined with a clear activator developed for uniwipe adhesives (BETAWIPE® 6600T or BETAWIPE® Hydro 2) on ceramic coated glass. Warm application of BETASEAL® 1910-1F delivers a medium initial handling strength to hold the position of the bonded parts.

Betaseal® 1130 product card banner

DuPont

BETASEAL® 1130

Brand: BETASEAL

Applications: Body Shop & Repair, Transportation Assembly, Electronics Adhesives

Product Families: Sealants, Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1130 is a medium viscosity, high modulus, non conductive, fast curing glass bonding adhesive which requires a primer during the process. It is a one component, ambient moisture curing adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension. BETASEAL® 1130 has a 2 hour Safe-Drive-Away-Time, crash tested to FMVSS 212 specification with twin airbags.

Betaseal® U-400hmnc product card banner

DuPont

BETASEAL® U-400HMNC

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® U-400HMNC is a one-component, moisture-curing, polyurethane-based adhesive especially developed for aftermarket glass replacement._x005F BETASEAL® U-400HMNC is ideal for direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glass. Other uses include attaching hardware to glass and backfilling to install reveal moldings or other trim._x005F BETASEAL® U-400HMNC is formulated to safely bond all vehicles, including those requiring HMNC adhesive._x005F BETASEAL® U-400HMNC is designed to be cold applied with ease of application and decking and gives a two hour minimum drive away time at 20°F.

Liveo™ Bio-psa Srs7-4502 product card banner

DuPont

Liveo™ BIO-PSA SRS7-4502

Brand: Liveo

Product Families: Adhesives

Chemical Family: Silicones

Liveo™ BIO-PSA SRS7-4502 is a Standard Reduced Silanol BIO-PSA, specifically designed for transdermal drug delivery systems. Liveo™ BIO-PSAs adhesives are permeable to many drugs and excipients and are designed to adhere drug-loaded systems to the skin. Liveo™ BIO-PSA Standard Silicone Adhesives are produced through a condensation reaction of a silanol endblocked polydimethylsiloxane (PDMS) with a silicate resin.

Liveo™ Bio-psa 7-4202 product card banner

DuPont

Liveo™ BIO-PSA 7-4202

Brand: Liveo

Product Families: Adhesives

Chemical Family: Silicones

Liveo™ BIO-PSA 7-4202 is an Amine Compatible pressure sensitive adhesive specially designed for transdermal drug delivery systems, and for compatibility with amine-functional drugs, or excipients. Liveo™ BIO-PSAs adhesives are permeable to many drugs and excipients and are designed to adhere drug-loaded systems to the skin. Amine compatible BIO-PSAs are produced through a condensation reaction of a silanol endblocked polydimethylsiloxane (PDMS) with a silicate resin. The residual silanol functionality is then capped with trimethylsiloxy groups to yield a chemically stable amine-compatible adhesive.

Liveo™ Bio-psa 7-4201 product card banner

DuPont

Liveo™ BIO-PSA 7-4201

Brand: Liveo

Product Families: Adhesives

Chemical Family: Silicones

Liveo™ BIO-PSA 7-4201 is an Amine Compatible pressure sensitive adhesive specially designed for transdermal drug delivery systems, and for compatibility with amine-functional drugs, or excipients.Liveo™ BIO-PSAs adhesives are permeable to many drugs and excipients and are designed to adhere drug-loaded systems to the skin. Amine compatible BIO-PSAs are produced through a condensation reaction of a silanol endblocked polydimethylsiloxane (PDMS) with a silicate resin. The residual silanol functionality is then capped with trimethylsiloxy groups to yield a chemically stable amine-compatible adhesive.

Liveo™ Bio-psa Srs7-4602 product card banner

DuPont

Liveo™ BIO-PSA SRS7-4602

Brand: Liveo

Product Families: Adhesives

Chemical Family: Silicones

Liveo™ BIO-PSA SRS7-4602 is a Standard Reduced Silanol BIO-PSA, specifically designed for transdermal drug delivery systems. Liveo™ BIO-PSAs adhesives are permeable to many drugs and excipients and are designed to adhere drug-loaded systems to the skin. Liveo™ BIO-PSA Standard Silicone Adhesives are produced through a condensation reaction of a silanol endblocked polydimethylsiloxane (PDMS) with a silicate resin.

Megum® 122J product card banner

DuPont

MEGUM® 122J

Brand: MEGUM

Applications: Transportation Assembly

Product Families: Adhesives

MEGUM® 122J is a general purpose cover coat adhesive used for bonding rubber compounds to metals and other rigid substrates during vulcanization. In rubber to metal bonding applications, MEGUM® 122J requires a MEGUM® or THIXON® primer. Other rigid substrates such as thermoplastics and other metal alloys may not require a primer. However, environmental resistances of the final application need to be considered._x005F MEGUM® 122J consists of reactive polymers and pigments in xylene. It is formulated without reportable levels of lead or other heavy metals._x005F MEGUM® or THIXON® primers adhere to hot and cold rolled steel, stainless steel, aluminum, brass and thermoplastics such as polyamides and polyesters._x005F MEGUM® 122J has well-balanced performance based on standard industry test specifications (ASTM D429-WDK2000)._x005F MEGUM® 122J has good boiling water, heat and pre-bake resistance._x005F MEGUM® 122J enables global standardization and consolidation. Based on the chemistry, MEGUM® 122J displays low mold fouling properties.

Thixon® 520-P-ef product card banner

DuPont

THIXON® 520-P-EF

Brand: THIXON

Applications: Transportation Assembly

Product Families: Adhesives

THIXON® 520-P-EF is a general purpose cover coat adhesive used for bonding rubber compounds to metals and other rigid substrates during vulcanization. In rubber to metal bonding applications, THIXON® 520-P-EF requires a MEGUM®or THIXON® primer. Other rigid substrates such as thermoplastics and other metal alloys may not require a primer.However, environmental resistances of the final application need to be considered.THIXON® 520-P-EF consists of reactive polymers and pigments in xylene. It is formulated without reportable levels oflead or other heavy metals.MEGUM® or THIXON® primers adhere to hot and cold rolled steel, stainless steel, aluminum, brass and thermoplastics such as polyamides and polyesters.THIXON® 520-P-EF has well-balanced performance based on standard industry test specifications (ASTMD429-WDK2000).THIXON® 520-P-EF has good boiling water, heat and pre-bake resistance.THIXON® 520-P-EF enables global standardization and consolidation. Based on the chemistry, THIXON® 520-P-EFdisplays low mold fouling properties.

Betamate® 32 product card banner

DuPont

BETAMATE® 32

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

BETAMATE® 32 is a one-component, moisture-curing, MS-Hybrid-Polymer-based sealer with permanent elasticity and adhesion to numerous substrates without primer pre-treatment. The material is used for various interior/ exterior sealing applications when no odor, medium strength, low volume retraction and wide adhesion range combined with the good UV stability of the polymer is required.

Liveo™ Medical Adhesive Type A product card banner

DuPont

Liveo™ Medical Adhesive Type A

Brand: Liveo

Product Families: Adhesives

Chemical Family: Silicones

Liveo™ Medical Adhesive Silicone, Type A is a one-component, low-slump, translucent silicone used to permanently bond materials. It is solventless and cures at room temperature upon exposure to atmospheric moisture. During the curing process, the silicone adhesive releases acetic acid vapor as a by-product. After final cure, the resulting silicone elastomer possesses the appearance, texture, and general composition of many conventional silicone elastomers.

Betaseal® 1407 product card banner

DuPont

BETASEAL® 1407

Brand: BETASEAL

Applications: Sealants, Electrical & Electronic Systems, Body Shop & Repair

Product Families: Adhesives

Chemical Family: Polyurethanes (PU)

BETASEAL® 1407 is a cold processable, medium viscous, non conductive, high modulus, fast curing glass bonding adhesive which requires a paint primer during the process. It is a one component, moisture curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive BETASEAL® 1407 cures with environmental moisture and skin formation and curing is dependent on humidity, temperature and application dimensions. All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.

Betamate® 6160 product card banner

DuPont

BETAMATE® 6160

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 6160 is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It has excellent adhesion for metal substrate (aluminum and steel) applications. BETAMATE® 6160 has excellent adhesion for aluminum bonding with excellent stress durability, high sag resistance, high wash off resistance and exceptionally high -40°C peel strength. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Betamate® 5103-3 product card banner

DuPont

BETAMATE® 5103-3

Brand: BETAMATE

Applications: Body Shop & Repair, Transportation Assembly

Product Families: Adhesives

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 5103-3 is a one-component, heat-curing, epoxy-based adhesive especially developed for the body shop. It is capable of bonding oily galvanized, cold-rolled steel, and aluminum. BETAMATE® 5103-3 has excellent adhesion to automotive steels (including coated steels and pretreated aluminum with good tolerance to oily and dry lubes). BETAMATE® 5103-3 helps to increase the stiffness and the crash stability of the entire car body with high durability of the adhesive and adhesive bond and corrosion protection due to its sealing capability. It is compatible with other mechanical and thermal joining techniques, compatible with the e-coat process, wash-off resistant and precurable by induction. Typical applications include bonding of the vehicle body structure and closure hem flange applications.