471 products found in Elastomers
Kalrez
Kalrez® 4079
Applications: Other Semiconductor Applications, Other Oil, Gas & Mining Applications, Pumps, Turbines & Compressors
Product Families: Fluoroelastomers, Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
End Uses: Semiconductor Applications, Aircraft Applications
Kalrez® 4079 perfluoroelastomer parts are a low compression set product for general purpose use in O-rings, diaphragms, seals and other parts used in the chemical process and aircraft industries. It is a carbon black filled product with excellent chemical resistance, good mechanical properties, and outstanding hot air aging properties. It exhibits low swell in organic acids, inorganic acids and aldehydes, and has good response to temperature cycling effects. A maximum service temperature of 316°C (600°F) is suggested, with short excursions to higher temperatures possible. Kalrez® 4079 is not recommended for use in hot water/steam applications or in contact with certain hot aliphatic amines, ethylene oxide, or propylene oxide.
Kalrez
Kalrez® Spectrum™ 6375
Applications: Pipes & Plumbing, Cooling & Climate, Fuel Systems
Product Families: Fluoroelastomers, Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
End Uses: Valve Parts, Electrical Connectors, Logging While Drilling Tools
Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.
Kalrez
Kalrez® Spectrum™ 7075
Applications: Other Automotive Applications, Sports & Recreation, Pipes & Plumbing
Product Families: Fluoroelastomers, Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
End Uses: Valve Parts, Pump Parts, Hot Glue Delivery Nozzle
Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was specifically developed for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.
Hytrel
Hytrel® 6356
Applications: Consumer Electronics, Industrial Automation, Other Consumer Goods Applications
Product Families: Thermoplastic Polyester Elastomers (TPE-E)
Chemical Family: Polyesters
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
End Uses: Appliances, Sporting Goods, Office Automation Equipment
Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.
Hytrel
Hytrel® 7246
Applications: Consumer Electronics, Industrial Automation, Apparel
Product Families: Thermoplastic Polyester Elastomers (TPE-E)
Chemical Family: Polyesters
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
End Uses: Appliances, Sporting Goods, Office Automation Equipment
Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.
Multiflex
Multiflex® G 60 A 11 BT 13893 Thermoplastic Elastomer
Applications: Other Automotive Applications
Product Families: Styrenic Thermoplastic Elastomers (TPE-S)
Chemical Family: Styrenics
Polymer Name: Styrenic Thermoplastic Elastomer
End Uses: Automotive Applications
Multiflex® Automotive GT Range can be transformed between 190°C to 230°C. In this temperature range, materials are stable, above, thermal degradation occurs, resulting in yellowing and significant odor emanation. Multiflex® G 60 A 11 BT 13893 is designed for use in injection molding/extrusion
Kalrez
Kalrez® 9100
Applications: Other Oil, Gas & Mining Applications, Pumps, Turbines & Compressors, Food & Beverage Manufacturing
Product Families: Fluoroelastomers, Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
Kalrez® 9100 is an amber translucent product targeted specifically for PECVD, ALD, HDPCVD and Conductor (Poly/Metal) Etch applications*. Kalrez® 9100 has been specifically designed for low erosion and ultra-low particle generation in harsh plasma environments. It offers excellent thermal stability, very low outgassing as well as excellent elastic recovery and good mechanical strength properties and is well suited for both static and select dynamic sealing applications*. A maximum application temperature of 300°C (572°F) is suggested. Ultrapure post-cleaning and packaging is standard for allKalrez® 9100 parts.
Hytrel
Hytrel® 4556
Applications: Consumer Electronics, Industrial Automation, Tubing & Fluids Handling
Product Families: Thermoplastic Polyester Elastomers (TPE-E)
Chemical Family: Polyesters
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
End Uses: Appliances, Sporting Goods, Office Automation Equipment
Hytrel® 4556 is a medium modulus grade with nominal hardness of 45D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.
Hytrel
Hytrel® 5556
Applications: Consumer Electronics, Industrial Automation, Other Consumer Goods Applications
Product Families: Thermoplastic Polyester Elastomers (TPE-E)
Chemical Family: Polyesters
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
End Uses: Appliances, Sporting Goods, Office Automation Equipment
Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection moulding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.
Hytrel
Hytrel® 3078
Applications: Consumer Electronics, Industrial Automation, Cooling & Climate
Product Families: Thermoplastic Polyester Elastomers (TPE-E)
Chemical Family: Polyesters
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
End Uses: Appliances, Office Automation Equipment, Electrical/Electronic Applications
Hytrel® 3078 is a very low modulus grade, with nominal hardness of 30D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Food compliance:Refer to Hytrel® 3078FGTypical applications:Compounding, extrusion, injection moulded and over-moulded parts for consumer use.
Hytrel
Hytrel® 8238
Applications: Consumer Electronics, Industrial Automation, Other Consumer Goods Applications
Product Families: Thermoplastic Polyester Elastomers (TPE-E)
Chemical Family: Polyesters
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
End Uses: Appliances, Sporting Goods, Office Automation Equipment
Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.
Hytrel
Hytrel® 5526
Applications: Consumer Electronics, Industrial Automation, Cosmetic Packaging
Product Families: Thermoplastic Polyester Elastomers (TPE-E)
Chemical Family: Polyesters
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
End Uses: Appliances, Office Automation Equipment, Electrical/Electronic Applications
Hytrel® 5526 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It is specially recommended for injection molding applications requiring high flow properties.Typical applications:Seals, packing and gaskets; gears and bearings.
Kalrez
Kalrez® 6221
Applications: Other Industrial Applications, Medical Devices & Assemblies, Other Devices & Assemblies
Product Families: Fluoroelastomers, Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
End Uses: O Rings
Kalrez® 6221 perfluoroelastomer parts are a white product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6221 parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez° 6221 parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability. Kalrez® 6221 is available as O-rings. For white custom parts, please refer to Kalrez® LS205 parts.
Kalrez
Kalrez® Spectrum™ 7375
Applications: Other Oil, Gas & Mining Applications, Pumps, Turbines & Compressors, Food & Beverage Manufacturing
Product Families: Fluoroelastomers, Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
Kalrez® Spectrum™ 7375 perfluoroelastomer parts are an innovative FFKM product based on a patented crosslinking system for chemical process industry applications where broad chemical and water/steam resistance are needed at elevated temperatures. Kalrez® Spectrum™ 7375 parts exhibit excellent compression set resistance, outstanding physical property retention, and good mechanical strength properties. A maximum application temperature of 300°C is suggested.
Kalrez
Kalrez® 3035
Applications: Other Industrial Applications, Medical Devices & Assemblies, Other Devices & Assemblies
Product Families: Fluoroelastomers, Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
End Uses: O Rings
Kalrez® 3035 perfluoroelastomer parts are a carbon black filled product well suited for use in production of valve stem packings. It may also be used to manufacture O-rings. Kalrez® 3035 was originally developed for use in Kalrez® KVSP® where low process temperatures or cold ambient conditions are involved. Chemical compatibility properties of Kalrez® 3035 are similar to those of Kalrez® 3018. This product has excellent chemical resistance to a wide variety of solvents and has a maximum service temperature of 288 °C (550 °F).
Kalrez
Kalrez® 6230
Applications: Other Industrial Applications, Medical Devices & Assemblies, Other Devices & Assemblies
Product Families: Fluoroelastomers, Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
End Uses: O Rings
Kalrez® 6230/6230A* perfluoroelastomer parts are a black product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6230/6230A parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez° 6230/6230A parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability.
Kalrez
Kalrez® 1050LF
Applications: Other Industrial Applications, Medical Devices & Assemblies, Other Devices & Assemblies
Product Families: Fluoroelastomers, Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
End Uses: O Rings, General Purpose
Kalrez® 1050LF perfluoroelastomer parts are a general-purpose product for O-rings, seals, and other parts used in chemical process industries. It has good hot water/steam resistance, excellent amine resistance, and good compression set properties. The maximum suggested service temperature is 288°C (550°F). It is not recommended for use in organic or inorganic acids at high temperatures.
Multiflex
Multiflex® TES A6007 SP1 GRE N106012C Thermoplastic Elastomer
Applications: Other Automotive Applications
Product Families: Styrenic Thermoplastic Elastomers (TPE-S)
Chemical Family: Styrenics
Polymer Name: Styrenic Thermoplastic Elastomer
End Uses: Automotive Applications
Multiflex® TES A6007 SPI GRE N0106012C is designed for use in injection molding
Hytrel
Hytrel® 4056
Applications: Consumer Electronics, Industrial Automation, Appliances & Electronics
Product Families: Thermoplastic Polyester Elastomers (TPE-E)
Chemical Family: Polyesters
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
End Uses: Sporting Goods, Office Automation Equipment, Electrical/Electronic Applications
Hytrel® 4056 is a low modulus Hytrel® grade with nominal durometer hardness of 40D and with high impact resistance down to -40°C. It contains a non-discoloring stabilizer. It is recommended for extrusion and compounding.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, beltingand seals, .
Liveo
Liveo™ BioMedical Grade HCR Q7-4735
Applications: Implants & Prosthetics, Medical Devices & Assemblies, Other Medical Applications
Product Families: Silicone Elastomers
Chemical Family: Silicones
Polymer Name: Silicone Elastomer
End Uses: Body Implants, Medical Devices, Medical/Healthcare Applications
Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.
Multiflex
Multiflex® TES A7512 EV0 FXT Thermoplastic Elastomer
Applications: Other Automotive Applications
Product Families: Styrenic Thermoplastic Elastomers (TPE-S)
Chemical Family: Styrenics
Polymer Name: Styrenic Thermoplastic Elastomer
End Uses: Automotive Applications
Multiflex® TES A7512 EV0 FXT is designed for use in injection molding
Kalrez
Kalrez® LS390
Applications: Other Oil, Gas & Mining Applications, Pumps, Turbines & Compressors, Food & Beverage Manufacturing
Product Families: Fluoroelastomers, Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
Kalrez® LS390 perfluoroelastomer parts are a grey product for use as sanitary seals in food handling, beverage, and pharmaceutical applications. Kalrez® LS390 perfluoroelastomer parts are a grey product for use as sanitary seals in food handling, beverage, and pharmaceutical applications where FDA, USP <87> and <88> Class VI compliance are required. In addition, Kalrez® LS390 parts also meet Japan Pharmacopeia, edition 16. Kalrez® LS390 has been designed to address these issues by offering High hardness properties, low stiction, temperature resistance up to 220°C (428°F) and excellent chemical resistance to process chemicals, WFI (water for injection), as well as SIP and/or CIP processes. Because of its unique grey color, LS390 parts are easy to identify for proper material selection and application.
MULTIBASE
MULTIBASE™ MB50-002
Product Families: Silicone Elastomers
Chemical Family: Silicones
DuPont MB50-002 Masterbatch is a pelletized formulation containing 50% of an ultra-high molecular weight (UHMW) siloxane polymer dispersed in low density polyethylene (LDPE). It is designed to be used as an additive in polyethylene compatible systems to impart benefits such as processing improvements and modification of surface characteristics. Liquid siloxane plastic additives have been used for several years to improve the lubricity and flow of thermoplastics. They are effective in this role although some difficulties have been experienced in the incorporation of liquids into thermoplastic melts without the use of specialized equipment. It has also been difficult to produce masterbatches with greater than 20% liquid siloxane because of processing difficulty and bleed problems. The DuPont MB Series Masterbatches address these problems by supplying a high concentration of an ultra-high molecular weight (UHMW) siloxane as a dispersion in a dry pellet form in a variety of thermoplastics.
Kalrez
Kalrez® Spectrum™ 6380
Applications: Other Industrial Applications, Medical Devices & Assemblies, Other Devices & Assemblies
Product Families: Fluoroelastomers, Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
End Uses: O Rings
Kalrez® Spectrum™ 6380 perfluoroelastomers parts are a non-black product specifically developed for chemical processes involving hot, aggressive amines. In addition, it has excellent overall chemical resistance (see chart below). This cream colored product is easily identifiable when selecting an O-ring material for harsh chemical plant services. This material has excellent mechanical properties and is a top choice for both static and dynamic sealing applications. A maximum service temperature of 225°C is suggested while short-term excursions to higher temperatures are permissible.
Kalrez
Kalrez® 0090
Applications: Medical Devices & Assemblies, Other Devices & Assemblies, Pharmaceutical Processing
Product Families: Fluoroelastomers, Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
End Uses: Valve Parts, O Rings, Valves
Kalrez® 0090 perfluoroelastomer parts deliver durable, reliable sealing solutions for applications requiring excellent rapid gas decompression (RGD) properties as well as high hardness, high modulus properties, and excellent extrusion resistance (even without backup rings). Potential oil and gas applications include downhole equipment such as drilling and completion tools, as well as industrial equipment including pumps, valves and compressors. Kalrez® 0090 has been certified by two independent laboratories to meet rigorous requirements for resistance to RGD. In addition to demonstrated RGD resistance, Kalrez® 0090 seals provide superior performance in regard to chemical and temperature properties. Chemical resistance: Kalrez® 0090 is resistant to chemicals encountered in the oil and gas industry, including sour process streams containing H2S. Broad temperature capability: Kalrez® 0090 retains good physical properties up to temperatures as high as 250°C (482°F) and down to 21°C (5.8°F). Under pressurized conditions, in laboratory tests, Kalrez® 0090 has demonstrated low temperature performance down to 40°C (40°F).
Liveo
Liveo™ Pharma 50 Tubing
Applications: Tubing & Fluids Handling, Medical Devices & Assemblies, Other Medical Applications
Product Families: Silicone Elastomers, Parts & Shapes
Chemical Family: Silicones
Polymer Name: Silicone Elastomer
End Uses: Tubing, Medical Devices, Medical/Healthcare Applications
Liveo™ Pharma 50 Tubing is Pharmaceutical grade silicone tubing for transferring of ultra-pure liquids, air or steam in pharmaceutical and biotechnological manufacturing processes. Designed for applications that require the transfer of high purity fluids where contamination is a concern like filling lines.
Hytrel
Hytrel® G4074
Applications: Tubing & Fluids Handling, Cosmetic Packaging, Sports & Recreation
Product Families: Thermoplastic Polyester Elastomers (TPE-E)
Chemical Family: Polyesters
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
End Uses: Appliances, Electrical/Electronic Applications, Automotive Applications
Hytrel® G4074 is a low modulus grade with nominal hardness of 40D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, mouldedproducts. Not suited for light-colored finished products.
Multiflex
Multiflex® A 1004 BZ 4775 N0200 Compounded Rubber In Primary Form
Applications: Other Automotive Applications
Product Families: Styrenic Thermoplastic Elastomers (TPE-S)
Chemical Family: Styrenics
Polymer Name: Styrenic Thermoplastic Elastomer
End Uses: Automotive Applications
Multiflex® A1004 B Z4775 N0200 is designed for use in injection molding/extrusion.
Liveo
Liveo™ Class VI Elastomers C6-180 Parts A & B
Applications: Implants & Prosthetics, Medical Devices & Assemblies, Other Medical Applications
Product Families: Silicone Elastomers
Chemical Family: Silicones
Polymer Name: Silicone Elastomer
End Uses: Body Implants, Medical Devices, Medical/Healthcare Applications
Liveo™ Class VI Elastomers (C6-135. C6-150, C6-165. C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.
Kalrez
Kalrez® 8900
Applications: Other Industrial Applications, Medical Devices & Assemblies, Other Devices & Assemblies
Product Families: Fluoroelastomers, Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
End Uses: O Rings
Kalrez® 8900 perfluoroelastomer parts are a black product for oxidation, diffusion, ALD, and LPCVD applications. It offers outstanding thermal stability, very low outgassing and excellent (low) compression set properties. Kalrez® 8900 parts exhibit excellent retention of physical properties at elevated temperatures, have excellent mechanical strength and are well-suited for both static and dynamic sealing applications. A maximum application temperature of 325°C (617°F) is suggested. Short excursions to higher temperatures may also be possible. Ultrapure post-cleaning and packaging is_x005F standard for all Kalrez® 8900 parts. _x005F
Kalrez
Kalrez® Spectrum™ 4001
Applications: Other Oil, Gas & Mining Applications, Pumps, Turbines & Compressors, Food & Beverage Manufacturing
Product Families: Fluoroelastomers, Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
Kalrez® Spectrum™ 4001 perfluoroelastomer parts are a non-filled product which is well suited for selected high purity applications in the semiconductor industry and other markets. Kalrez® Spectrum™ 4001 has excellent chemical resistance, exhibiting low swell in organic acids, inorganic acids, esters, ketones, and aldehydes. It also offers low hardness and good mechanical properties. While Kalrez® Spectrum™ 4001 is a non-filled perfluoroelastomer, the color is black. A maximum service temperature of 275°C (527°F) is suggested.
Kalrez
Kalrez® 6190
Applications: Other Oil, Gas & Mining Applications, Pumps, Turbines & Compressors, Food & Beverage Manufacturing
Product Families: Fluoroelastomers, Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
Kalrez® 6190 perfluoroelastomer parts are a carbon black-filled product specifically designed for custom part and high volume applications. It has excellent thermal stability good mechanical strength properties and can be used in both static and dynamic sealing applications up to 300 °C (572 °F). In addition, Kalrez® 6190 is resistant to most chemical solvents but is not suggested for use in steam, strong acids or strong bases. Please contact a Kalrez® Application Engineer to discuss performance fit in your specific application.
Hytrel
Hytrel® 5553FG NC010
Applications: Cosmetic Packaging, Food & Beverage Packaging, Other Processing & Packaging Applications
Product Families: Thermoplastic Polyester Elastomers (TPE-E)
Chemical Family: Polyesters
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
End Uses: Non Specific Food Applications, Appliances, Thermoforming Applications
Hytrel® 5553FG NC010 is a high performance thermoplastic polyester elastomer developed for applications in contact with food. FOOD CONTACTThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.
Liveo
Liveo™ Class VI Elastomers C6-150 Parts A & B
Applications: Implants & Prosthetics, Medical Devices & Assemblies, Other Medical Applications
Product Families: Silicone Elastomers
Chemical Family: Silicones
Polymer Name: Silicone Elastomer
End Uses: Body Implants, Medical Devices, Medical/Healthcare Applications
Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.
Kalrez
Kalrez® 9500
Applications: Other Oil, Gas & Mining Applications, Pumps, Turbines & Compressors, Food & Beverage Manufacturing
Product Families: Fluoroelastomers, Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
Kalrez® 9500 perfluoroelastomer parts are a tan product targeted specifically for deposition processes where ozone, ammonia and water vapor are used for processing, e.g. SACVD, FCVD, PECVD curing processes, etc. It has been specifically designed for use in applications where the plasma environment is more chemical, i.e., where oxygen and fluorine radicals are more dominant.
