Products
DuPont
Liveo™ BioMedical Grade HCR Q7-4735
Polymer Name: Silicone Elastomer
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Features: Enhanced Tear Resistant, Non Blooming, High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency
Tear Strength: 35.0 - 35.0 kN/m
Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.
DuPont
Delrin® 500CPE NC010
Applications: Sports & Recreation, Consumer Electronics, Other Bonding & Assembly Applications
Product Families: Polyacetals, Engineering & Specialty Polymers
Polymer Name: Polyacetal Homopolymer (POM)
End Uses: Consumer Applications, Automotive Applications, Appliances
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 500CPE (DE20729) is a medium viscosity acetal homopolymer with very low VOC emissions for applications in automotive interiors. It provides good mechanical performances with improved processing, thermal stability and productivity for injection molding.
DuPont
Liveo™ Pharma 50 Tubing
Polymer Name: Silicone Elastomer
Physical Form: Tube
Features: Hydrophobic, Excellent Flexibility, Good Thermal Stability, Easily Sterilized, High Resilience, Consistent Performance, Low Emissions, Complete Traceability, Low Extractables, Rigorous Change Control
End Uses: Tubing, Medical/Healthcare Applications, Medical Devices
Tensile Strength: 90.0 - 90.0 MPa
Liveo™ Pharma 50 Tubing is Pharmaceutical grade silicone tubing for transferring of ultra-pure liquids, air or steam in pharmaceutical and biotechnological manufacturing processes. Designed for applications that require the transfer of high purity fluids where contamination is a concern like filling lines.
DuPont
Delrin® 300CPE NC010
Applications: Sports & Recreation, Consumer Electronics, Other Bonding & Assembly Applications
Product Families: Polyacetals, Engineering & Specialty Polymers
Polymer Name: Polyacetal Homopolymer (POM)
End Uses: Consumer Applications, Automotive Applications, Appliances
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 300CPE (DE20732) is a medium-high viscosity acetal homopolymer with outstanding balance of ease of processing and part performance, and with very low VOC emissions. Delrin® 300CPE provides optimum mechanical performance with its excellent combination of toughness and strength with improved processing, thermal stability and productivity for injection molding.
DuPont
Liveo™ Class VI Elastomers C6-180 Parts A & B
Polymer Name: Silicone Elastomer
Processing Methods: Extrusion
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Autoclaved, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Lot-to-lot consistency, Non Blooming
Liveo™ Class VI Elastomers (C6-135. C6-150, C6-165. C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.
DuPont
Liveo™ Class VI Elastomers C6-150 Parts A & B
Polymer Name: Silicone Elastomer
Processing Methods: Extrusion
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Autoclaved, Heat Stabilized, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Lot-to-lot consistency, Non Blooming
Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.
DuPont
Liveo™ BioMedical Grade HCR Q7-4750
Polymer Name: Silicone Elastomer
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Features: High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency, Enhanced Tear Resistant, Non Blooming
Tear Strength: 46.0 - 46.0 kN/m
Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.
DuPont
Liveo™ MDX4-4210
Polymer Name: Silicone Elastomer
Processing Methods: Transfer Molding, Compression Molding
End Uses: Prototyping, Medical/Healthcare Applications, Medical Devices, Mold Making
Features: Non Blooming, Translucent, Low Warpage, Consistent High Quality, Pourable, Pigmentable, Low Emissions, Good Thick Section Cure, Excellent Dielectric Properties
Liveo™ MDX4-4210 BioMedical Grade Elastomer is a pourable two- component product which, when combined, cures to a translucent silicone rubber over several hours at room temperatures, but may be more rapidly cured by application of heat.
DuPont
Liveo™ BioMedical Grade HCR Q7-4780
Polymer Name: Silicone Elastomer
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Features: High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency, Enhanced Tear Resistant, Non Blooming
Tear Strength: 26.0 - 26.0 kN/m
Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.
DuPont
Liveo™ BioMedical Grade HCR Q7-4765
Polymer Name: Silicone Elastomer
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Features: Non Blooming, Improved Tear Resistance, Pigmentable, Low Emissions, High Gas Permeability
Tear Strength: 39.0 - 39.0 kN/m
Liveo™ BioMedical Grade ETR Elastomers (Q7-series) are a series of two-part, enhanced-tearresistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.
DuPont
Liveo™ Class VI Elastomers C6-570 LSR
Polymer Name: Silicone Elastomer
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Heat Stabilized, Autoclaved, Solventless, Consistent High Quality, Platinum Catalyzed, High Gas Permeability, Can be post cured, Good Processability, Low Emissions, Fast Curing, Non Blooming
Liveo™ Class VI Elastomers (C6-530, C6-540, C6-550, C6-560, C6-570) Parts A & B are a series of two-part platinum catalyzed silicone elastomers.
DuPont
Liveo™ Class VI Elastomers C6-250
Polymer Name: Silicone Elastomer
Processing Methods: Transfer Molding, Compression Molding, Extrusion
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Heat Stabilized, Autoclaved, Consistent High Quality, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Blendable
Liveo™ Class VI Elastomers (C6- eries) are a series of one-part uncatalyzed silicone elastomer raw materials. The addition of a catalyst is necessary to accomplish cure.
DuPont
Liveo™ Class VI Elastomers C6-540 LSR
Polymer Name: Silicone Elastomer
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Heat Stabilized, Autoclaved, Solventless, Consistent High Quality, High Gas Permeability, Platinum Catalyzed, Can be post cured, Good Processability, Low Emissions, Fast Curing, Non Blooming
Liveo™ Class VI Elastomers (C6-530, C6-540, C6-550, C6-560, C6-570) Parts A & B are a series of two-part platinum catalyzed silicone elastomers.
DuPont
Liveo™ Class VI Elastomers C6-235
Polymer Name: Silicone Elastomer
Processing Methods: Transfer Molding, Compression Molding, Extrusion
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Heat Stabilized, Autoclaved, Consistent High Quality, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Blendable
Live™ Class VI Elastomers (C6- eries) are a series of one-part uncatalyzed silicone elastomer raw materials. The addition of a catalyst is necessary to accomplish cure.
DuPont
Delrin® 511CPE NC010
Flexural Modulus: 3200.0 - 3200.0 MPa
Delrin® 511CPE is a medium viscosity acetal homopolymer with enhanced crystallization for faster cycle times, excellent creep and fatigue resistance, and very low VOC emissions. Delrin® 511CPE provides improved thermal stability, excellent dimensional stability, low warpage, fewer voids, and improved productivity for injection molding.
DuPont
TPSiV® X-5300 A8503 Natural 25644 Thermoplastic Elastomer
Density: 1000.0 - 1000.0 kg/m³
Tear Strength: 61.0 - 61.0 kN/m
Compression Set (70 °C): 45.0 - 45.0 %
TPSiV® X5300 A8503 NAT 25644 thermoplastic elastomer is a low odor, plasticiser-free thermoplastic elastomer with excellent bonding to polypropylene and polyethylene. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.
DuPont
Liveo™ Class VI Elastomer C6-350LH Parts A & B
Polymer Name: Silicone Elastomer
Processing Methods: Extrusion
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Autoclaved, Heat Stabilized, Platinum Catalyzed, High Gas Permeability, Good Colorability, Non-tacky surface, Enhanced Physical Properties, Can be post cured, Low Emissions, Lot-to-lot consistency, High Resilience, Non Blooming
Liveo™ C6-350LH Elastomer, Parts A & B is a two-part platinum-catalyzed silicone elastomer.
DuPont
Liveo™ BioMedical Grade HCR Q7-4720
Polymer Name: Silicone Elastomer
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Features: High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency, Enhanced Tear Resistant, Non Blooming
Tear Strength: 31.0 - 31.0 kN/m
Liveo™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.
DuPont
Liveo™ Class VI Elastomers C6-550 LSR
Polymer Name: Silicone Elastomer
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Heat Stabilized, Autoclaved, Solventless, Consistent High Quality, Platinum Catalyzed, High Gas Permeability, Can be post cured, Good Processability, Low Emissions, Fast Curing, Non Blooming
Liveo™ Class VI Elastomers (C6-530, C6-540, C6-550, C6-560, C6-570) Parts A & B are a series of two-part platinum catalyzed silicone elastomers.
DuPont
Liveo™ Class VI Elastomers C6-135 Parts A & B
Polymer Name: Silicone Elastomer
Processing Methods: Extrusion
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Autoclaved, Heat Stabilized, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Lot-to-lot consistency, Non Blooming
Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.
DuPont
Liveo™ Pharma Molded Assemblies
Polymer Name: Silicone Elastomer
Physical Form: Tube
Features: Low Emissions
End Uses: Medical/Healthcare Applications, Medical Devices, Tubing
Liveo™ Pharma Molded Assemblies is a custom molded silicone assemblies designed for ultra-pure transfer applications in biopharmaceutical and pharmaceutical manufacturing processes. Liveo™ Pharma Molded Assemblies are designed for fluid transfer applications requiring integrated premium quality silicone tubing, molded silicone connections and customer specified components (when applicable).
DuPont
Delrin® 100CPE NC010
Flexural Modulus: 2800.0 - 2800.0 MPa
Delrin® 100CPE is a high viscosity acetal homopolymer for use in easy-to-fill molds with very low VOC emissions. Delrin® 100CPE provides optimum mechanical performance with its excellent combination of toughness and strength with improved processing thermal stability and productivity for injection molding.
DuPont
Multiflex® G 40 A 21 BT Z2811 N0081(A) Thermoplastic Elastomer
Tear Strength: 20.0 - 20.0 kN/m
Strain at Break: 750.0 - 750.0 %
Compression Set (70 °C): 38.0 - 38.0 %
Multiflex® G 40 A 21 BT Z2811 N0081(A) Thermoplastic Elastomer by DuPont is comprised of Styrenic Thermoplastic Elastomer. It is commonly used It is available in Pellets form.
DuPont
Liveo™ Biomedical Grade ETR Elastomer Q7-4550
Polymer Name: Silicone Elastomer
Processing Methods: Transfer Molding, Compression Molding, Calendering, Extrusion, Cable Extrusion
End Uses: Medical/Healthcare Applications, Medical Devices
Features: Heat Stabilized, Autoclaved, Consistent High Quality, Good Colorability, High Gas Permeability, Non-tacky surface, Pigmentable, Low Emissions, Blendable
Liveo™ BioMedical Grade ETR Elastomers (Q7 series) are a series of one-part uncatalyzed silicone elastomer raw materials.
DuPont
Liveo™ Biomedical Grade ETR Elastomer Q7-4535
Polymer Name: Silicone Elastomer
Processing Methods: Transfer Molding, Compression Molding, Extrusion, Cable Extrusion
End Uses: Medical/Healthcare Applications, Medical Devices
Features: Autoclaved, Heat Stabilized, Consistent High Quality, High Gas Permeability, Good Colorability, Non-tacky surface, Pigmentable, Blendable, Low Emissions
Liveo™ BioMedical Grade ETR Elastomers (Q7 series) are a series of one-part uncatalyzed silicone elastomer raw materials.
DuPont
Liveo™ Biomedical Grade ETR Elastomer Q7-4565
Polymer Name: Silicone Elastomer
Processing Methods: Transfer Molding, Compression Molding, Calendering, Extrusion, Cable Extrusion
End Uses: Medical/Healthcare Applications, Medical Devices
Features: Autoclaved, Heat Stabilized, Consistent High Quality, High Gas Permeability, Good Colorability, Non-tacky surface, Blendable, Low Emissions
Liveo™ BioMedical Grade ETR Elastomers (Q7 series) are a series of one-part uncatalyzed silicone elastomer raw materials.
DuPont
Liveo™ Class VI Elastomers C6-560 LSR
Polymer Name: Silicone Elastomer
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Cost Effective, Heat Stabilized, Autoclaved, Solventless, Consistent High Quality, Platinum Catalyzed, High Gas Permeability, Can be post cured, Good Processability, Low Emissions, Fast Curing, Non Blooming
Liveo™ Class VI Elastomers (C6-530, C6-540, C6-550, C6-560, C6-570) Parts A & B are a series of two-part platinum catalyzed silicone elastomers.
DuPont
Liveo™ Pharma 50 (AP) Tubing
Physical Form: Tube
Features: Low Extractables, Rigorous Change Control, Translucent, Odorless, Hydrophobic, Excellent Flexibility, Good Thermal Stability, Peroxide-free, Easily Sterilized, Exceptional Resilience, Consistent Performance, Complete Traceability, Low Emissions
End Uses: Tubes, Medical/Healthcare Applications, Medical Device Housings
Color: Translucent
Tensile Strength: 9.0 - 9.0 MPa
Liveo™ Pharma 50 (AP) Tubing is a pharmaceutical grade silicone tubing for transferring of ultra-pure liquids, air or steam in pharmaceutical and biotechnological manufacturing processes.