Company logo

Products

DuPont
Matching Product Categories
Elastomers
Plastics
101 products found on DuPont.
With TDS
Multiflex® G 60 A 11 Bt 13893 Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 60 A 11 BT 13893 Thermoplastic Elastomer

Tear Strength: 23.0 - 23.0 kN/m

Strain at Break: 650.0 - 650.0 %

Multiflex® Automotive GT Range can be transformed between 190°C to 230°C. In this temperature range, materials are stable, above, thermal degradation occurs, resulting in yellowing and significant odor emanation. Multiflex® G 60 A 11 BT 13893 is designed for use in injection molding/extrusion

Multiflex® A 1004 Bz 4775 N0200 Compounded Rubber In Primary Form product card banner

DuPont

Multiflex® A 1004 BZ 4775 N0200 Compounded Rubber In Primary Form

Tear Strength: 46.0 - 46.0 kN/m

Strain at Break: 550.0 - 550.0 %

Multiflex® A1004 B Z4775 N0200 is designed for use in injection molding/extrusion.

Multiflex® G 10 A 41 15057 Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 10 A 41 15057 Thermoplastic Elastomer

Density: 870.0 - 870.0 kg/m³

Tear Strength: 8.0 - 8.0 kN/m

Multiflex® G 10 A 41 15057 is designed for use in injection molding/extrusion

Liveo™ Class Vi Elastomers C6-180 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-180 Parts A & B

Polymer Name: Silicone Elastomer

Processing Methods: Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Autoclaved, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Lot-to-lot consistency, Non Blooming

Liveo™ Class VI Elastomers (C6-135. C6-150, C6-165. C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Liveo™ Class Vi Elastomers C6-150 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-150 Parts A & B

Polymer Name: Silicone Elastomer

Processing Methods: Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Autoclaved, Heat Stabilized, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Lot-to-lot consistency, Non Blooming

Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Multiflex® G 62 A 21 B Z1631 N0052 (A) Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 62 A 21 B Z1631 N0052 (A) Thermoplastic Elastomer

Tear Strength: 37.0 - 37.0 kN/m

Strain at Break: 550.0 - 550.0 %

Compression Set (70 °C): 33.0 - 33.0 %

Multiflex® brand TES Automotive G Range are styrenics thermoplastic elastomers, designed for medium/high compression set applications. Compatibility with polyolefin enables bi-material parts (continuous process or cold insert).

Multiflex® A 1004 65a 520 Fxt 16780 S product card banner

DuPont

Multiflex® A 1004 65A 520 FXT 16780 S

Density: 1040.0 - 1040.0 kg/m³

Tear Strength: 37.0 - 37.0 kN/m

Multiflex® A1004 65A 520 FXT 16780S is designed for use in injection molding/extrusion.

Multiflex® G 55 A 11 B Z1751 Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 55 A 11 B Z1751 Thermoplastic Elastomer

Tear Strength: 24.0 - 24.0 kN/m

Multiflex™ G are thermoplastic elastomers based styrenic, combining soft touch, elasticity and compression set performances. Compatibility with polyolefin enables bi-material parts (continuous process or cold insert).

Multiflex® A 1004 65a 520 Fxt 16780 product card banner

DuPont

Multiflex® A 1004 65A 520 FXT 16780

Density: 1020.0 - 1020.0 kg/m³

Tear Strength: 31.0 - 31.0 kN/m

Multiflex® A 1004 65A 520 FXT 16780 is designed for injected molded, unpainted airbag covers and inflatable-restraint components.

Liveo™ Class Vi Elastomers C6-165 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-165 Parts A & B

Polymer Name: Silicone Elastomer

Processing Methods: Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Lot-to-lot consistency, Non Blooming

Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Multiflex® G60 A 21 Bt Z3519n0104a product card banner

DuPont

Multiflex® G60 A 21 BT Z3519N0104A

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Extrusion, Film Extrusion, Injection Molding

Additives Included: UV Stabilizer

Tear Strength: 27.0 - 27.0 kN/m

Strain at Break: 300.0 - 300.0 %

Compression Set (70 °C): 26.0 - 26.0 %

Tpsiv® 4000-75a Sr product card banner

DuPont

TPSiV® 4000-75A SR

Density: 1100.0 - 1100.0 kg/m³

Tear Strength: 64.0 - 64.0 kN/m

Compression Set (70 °C): 70.0 - 70.0 %

TPSiV® 4000-75A SR by DuPont is comprised of Thermoplastic Vulcanizate. It is commonly used It is available in Pellets form.

Liveo™ Biomedical Grade Lsr Q7-4840 product card banner

DuPont

Liveo™ BioMedical Grade LSR Q7-4840

Polymer Name: Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed

Liveo™ Bio Medical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.

Tpsiv® 3345-65a Natural 25564 Thermoplastic Elastomer product card banner

DuPont

TPSiV® 3345-65A Natural 25564 Thermoplastic Elastomer

Density: 1170.0 - 1170.0 kg/m³

Tear Strength: 41.0 - 41.0 kN/m

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Multiflex® G 75 A 520 205/09 10779 Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 75 A 520 205/09 10779 Thermoplastic Elastomer

Tear Strength: 35.0 - 35.0 kN/m

Multiflex® brand TES Automotive G Range are styrenics thermoplastic elastomers, designed for medium/high compression set applications. Compatibility with polyolefin enables bi-material parts (continuous process or cold insert).

Multiflex® G 75 A 520 product card banner

DuPont

Multiflex® G 75 A 520

Tear Strength: 35.0 - 35.0 kN/m

Strain at Break: 730.0 - 730.0 %

Multiflex® G 75 A 520 by DuPont is comprised of Styrenic Thermoplastic Elastomer. It is commonly used It is a Silicone-free It is available in Pellets form.

Liveo™ Biomedical Grade Lsr 7-4870 product card banner

DuPont

Liveo™ BioMedical Grade LSR 7-4870

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Liveo™ BioMedical Grade LSR 7-4870 is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion.

Liveo™ Biomedical Grade Lsr 7-4860 product card banner

DuPont

Liveo™ BioMedical Grade LSR 7-4860

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Liveo™ BioMedical Grade LSR 7-4860 is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion.

Liveo™ Biomedical Grade Lsr Q7-4850 product card banner

DuPont

Liveo™ BioMedical Grade LSR Q7-4850

Polymer Name: Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Autoclaved, Platinum Catalyzed, High Gas Permeability

Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion. Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.

Tpsiv® 4000-60a Black Thermoplastic Elastomer product card banner

DuPont

TPSiV® 4000-60A Black Thermoplastic Elastomer

Density: 1100.0 - 1100.0 kg/m³

Tear Strength: 30.0 - 30.0 kN/m

Compression Set (70 °C): 87.0 - 87.0 %

TPSiV® 4000-60A SR thermoplastic elastomer is a UV stable material with excellent abrasion and scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on smartphones, portable electronic cases and wearable electronic devices.

Multiflex® A 1004 Z4141 Thermoplastic Elastomer product card banner

DuPont

Multiflex® A 1004 Z4141 Thermoplastic Elastomer

Tear Strength: 25.0 - 25.0 kN/m

Strain at Break: 700.0 - 700.0 %

Multiflex® A1004 Z4141 is designed for use in injection molding/extrusion

Multiflex® G 40 A 11 T Z1633 Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 40 A 11 T Z1633 Thermoplastic Elastomer

Tear Strength: 19.0 - 19.0 kN/m

Strain at Break: 550.0 - 550.0 %

Compression Set (70 °C): 23.0 - 23.0 %

Multiflex® G 40 A 11 T Z1633 Thermoplastic Elastomer by DuPont is comprised of Styrenic Thermoplastic Elastomer. It is commonly used It is available in Pellets form.

Tpsiv® 5300 A 6002 Natural Thermoplastic Elastomer product card banner

DuPont

TPSiV® 5300 A 6002 Natural Thermoplastic Elastomer

Density: 920.0 - 920.0 kg/m³

Tear Strength: 44.0 - 44.0 kN/m

TPSiV® 5300 A6002 thermoplastic elastomer is a low odor, plasticiser-free thermoplastic elastomer with excellent bonding to polypropylene and polyethylene. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Tpsiv® 3345-65a Custom Color Thermoplastic Elastomer product card banner

DuPont

TPSiV® 3345-65A Custom Color Thermoplastic Elastomer

Density: 1170.0 - 1170.0 kg/m³

Tear Strength: 41.0 - 41.0 kN/m

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Tpsiv® 3345-65a Black 25565 Thermoplastic Elastomer product card banner

DuPont

TPSiV® 3345-65A Black 25565 Thermoplastic Elastomer

Density: 1170.0 - 1170.0 kg/m³

Tear Strength: 41.0 - 41.0 kN/m

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Tpsiv® 3345-65a Bk029 Thermoplastic Elastomer product card banner

DuPont

TPSiV® 3345-65A BK029 Thermoplastic Elastomer

Density: 1170.0 - 1170.0 kg/m³

Tear Strength: 41.0 - 41.0 kN/m

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Tpsiv® 4000-75a Sr Black Solid Thermoplastic Elastomer product card banner

DuPont

TPSiV® 4000-75A SR Black Solid Thermoplastic Elastomer

Density: 1100.0 - 1100.0 kg/m³

Tear Strength: 64.0 - 64.0 kN/m

Compression Set (70 °C): 70.0 - 70.0 %

TPSiV® 4000-75A SR thermoplastic elastomer is a UV stable material with good scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Tpsiv® 4000-50a Natural Thermoplastic Elastomer product card banner

DuPont

TPSiV® 4000-50A Natural Thermoplastic Elastomer

Density: 1100.0 - 1100.0 kg/m³

Tear Strength: 23.7 - 23.7 kN/m

Compression Set (70 °C): 75.6 - 75.6 %

TPSiV® 4000-50A SR thermoplastic elastomer is a UV stable material with excellent abrasion and scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on smartphones, portable electronic cases and wearable electronic devices.

Multiflex® G 45 A 21 B Z2487 N0033(a) Thermoplastic Elastomer product card banner

DuPont

Multiflex® G 45 A 21 B Z2487 N0033(A) Thermoplastic Elastomer

Tear Strength: 23.0 - 23.0 kN/m

Strain at Break: 500.0 - 500.0 %

Compression Set (70 °C): 23.0 - 23.0 %

Multiflex® G 45 A 21 B Z2487 N0033(A) Thermoplastic Elastomer by DuPont is comprised of Styrenic Thermoplastic Elastomer. It is commonly used It is available in Pellets form.

Liveo™ Class Vi Elastomers C6-235 product card banner

DuPont

Liveo™ Class VI Elastomers C6-235

Polymer Name: Silicone Elastomer

Processing Methods: Transfer Molding, Compression Molding, Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Consistent High Quality, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Blendable

Live™ Class VI Elastomers (C6- eries) are a series of one-part uncatalyzed silicone elastomer raw materials. The addition of a catalyst is necessary to accomplish cure.

Liveo™ Biomedical Grade Lsr 7-6860 product card banner

DuPont

Liveo™ BioMedical Grade LSR 7-6860

Polymer Name: Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Good Thermal Stability, Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed

Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.

Liveo™ Class Vi Elastomers C6-250 product card banner

DuPont

Liveo™ Class VI Elastomers C6-250

Polymer Name: Silicone Elastomer

Processing Methods: Transfer Molding, Compression Molding, Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Consistent High Quality, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Blendable

Liveo™ Class VI Elastomers (C6- eries) are a series of one-part uncatalyzed silicone elastomer raw materials. The addition of a catalyst is necessary to accomplish cure.

Tpsiv® 4200-70a Black Thermoplastic Elastomer product card banner

DuPont

TPSiV® 4200-70A Black Thermoplastic Elastomer

Density: 1180.0 - 1180.0 kg/m³

Tear Strength: 48.6 - 48.6 kN/m

Compression Set (70 °C): 75.0 - 75.0 %

TPSiV® 4200-70A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion and scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on consumer electronics, mobile communication devices, computers and sports & leisure applications.

Tpsiv® 4200-70a Bk025 Thermoplastic Elastomer product card banner

DuPont

TPSiV® 4200-70A BK025 Thermoplastic Elastomer

Density: 1180.0 - 1180.0 kg/m³

Tear Strength: 48.6 - 48.6 kN/m

Compression Set (70 °C): 75.0 - 75.0 %

TPSiV® 4200-70A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion and scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on consumer electronics, mobile communication devices, computers and sports & leisure applications.

Tpsiv® X-5300 A8503 Natural 25644 Thermoplastic Elastomer product card banner

DuPont

TPSiV® X-5300 A8503 Natural 25644 Thermoplastic Elastomer

Density: 1000.0 - 1000.0 kg/m³

Tear Strength: 61.0 - 61.0 kN/m

Compression Set (70 °C): 45.0 - 45.0 %

TPSiV® X5300 A8503 NAT 25644 thermoplastic elastomer is a low odor, plasticiser-free thermoplastic elastomer with excellent bonding to polypropylene and polyethylene. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Tpsiv® 4000-75a Sr Natural Thermoplastic Elastomer product card banner

DuPont

TPSiV® 4000-75A SR Natural Thermoplastic Elastomer

Density: 1100.0 - 1100.0 kg/m³

Tear Strength: 64.0 - 64.0 kN/m

Compression Set (70 °C): 70.0 - 70.0 %

TPSiV® 4000-75A SR thermoplastic elastomer is a UV stable material with good scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.