Duralar® Sliding Wear Control

1 of 5 products in this brand
Duralar® Sliding Wear Control coatings are specifically designed for use in applications that are subject to adhesive wear from the sliding motion of parts such as in reciprocating pistons and pumps. Many of these applications are found in oil and gas, automotive, and other heavy industries.

Product Type: Coating

Features: Wear Resistant

Application Area: Reciprocating Piston Pump

Compatible Substrates & Surfaces: Aluminum, Metal, Nickel, Steel

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Product Type

Features & Benefits

Ready-to-Use Product Features

Applications & Uses

Compatible Substrates & Surfaces
Application Environments

Wet, dry, oil, drilling mud

Applicable Substrates
  • Carbon Steel
  • Stainless Steel
  • Aluminum
  • Inconel
  • Ti Alloys
  • Ni/Ni Alloys
  • SiC

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Thickness1.0 - 6.0µm
Hardness (Adjustable to Application)12.0GPa
Hardness (Stainless 304, Typical)max. 1GPa
Hardness (Stainless 17 - 4, Typical)max. 5GPa
Hardness (Inconel 718, Typical)max. 3GPa
Hardness (Chrome on Steel,Typical)max. 10GPa
Wear Rate (Typical, Dry)5×10⁻⁷mm³/nm
Wear Rate (Stainless 304)1×10⁻³mm³/nm
Wear Rate (Stainless 17 - 4)4×10⁻³mm³/nm
Wear Rate (Inconel 718)6×10⁻⁴mm³/nm
Wear Rate (Chrome on Steel)3×10⁻⁴mm³/nm
Coefficient of Friction (Dry)max. 0.1
Deposition MethodPECVD
Deposition Temperature (Substrate Dependent)120 - 250ºC
Deposition SystemDuralar Emperion/Duralar CS-10
Deposition Rate (Typical)min. 0.7µm/minute