product
Durastar™ Polymer MN611 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It contains a mold release to improve ejection. It has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. MN611 has very good toughness.
DURASTAR™ MN611
Durastar™ Polymer MN611 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It contains a mold release to improve ejection. It has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. MN611 has very good toughness.
Take Action
Knowde Enhanced TDS
Identification & Functionality
Additives Included
Chemical Family
Polymer Name
Plastics & Elastomers Functions
Technologies
Product Families
Features & Benefits
Applications & Uses
Markets
Applications
Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
Properties
Physical Form
Mechanical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Strength at Yield | 47.6 | MPa | ASTM D 638 |
| Tensile Strength at Break | 51 | MPa | ASTM D 638 |
| Elongation at Yield | 5 | % | ASTM D 638 |
| Elongation at Break | 300 | % | ASTM D 638 |
| Stress at break | 46 | MPa | ISO 527 |
| Tensile Modulus | 1800 | MPa | ASTM D 638 |
| Yield stress | 47 | MPa | ISO 527 |
| Strain at break | >50 | % | ISO 527 |
| Yield strain | 4 | % | ISO 527 |
| Flexural modulus, 23° | 1850 | MPa | ISO 178 |
| Flexural Modulus | 1999 | MPa | ASTM D 790 |
| Izod Impact notched (1/8 in) | 80.1 | J/m | ASTM D 256 |
| Izod notched impact strength, +23° | 7.8 | kJ/m2 | ISO 180/1A |
| Izod Impact notched, Low-Temperature | 37.4 | J/m | ASTM D 256 |
| Izod notched impact strength | 4.8 | kJ/m2 | ISO 180/1A |
| Rockwell Hardness | R103 | - | ASTM D 785 |
| Temperature | -40 | °C | - |
Physical Properties
| Value | Units | Test Method / Conditions | |
| Mold Shrinkage (MD) | 0.004 | mm/mm | ASTM D 955 |
| Density | 1200 | kg/m3 | ISO 1183 |
Thermal Properties
| Value | Units | Test Method / Conditions | |
| Deflection Temperature Under Load (66 psi) | 73.9 | °C | ASTM D 648 |
| Deflection Temperature Under Load (264 psi) | 65 | °C | ASTM D 648 |
Optical Properties
| Value | Units | Test Method / Conditions | |
| Haze | 0.3 | % | ASTM D 1003 |
| Light Transmittance | 91 | % | ASTM D 1003 |
Color
Natural Color
Physical Form
Pellets
Regulatory & Compliance
Certifications & Compliance
Packaging & Availability
Regional Availability
Follow
News