product
product
EASTOFLEX™ P1010PL
Search in

Producer: 
Eastman
Brand: 
EASTOFLEX
Eastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ P1010PL is a propylene homopolymer, pelletized and coated with a polypropylene powder, having a melt viscosity of 1,000 mPa·s at 190°C.

EASTOFLEX™ P1010PL

Producer: 
Eastman
Brand: 
EASTOFLEX
Eastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ P1010PL is a propylene homopolymer, pelletized and coated with a polypropylene powder, having a melt viscosity of 1,000 mPa·s at 190°C.
Take Action

Knowde Enhanced TDS

Expand All

+

Features & Benefits

+
Product Highlights
  • Broad compatibility with numerous elastomers, polymers, and other tackifying resins
  • Broad temperature service range
  • Convenient product form
  • Excellent thermal and UV stability
  • Excellent water and moisture resistance
  • Low color
  • Low odor

Applications & Uses

+
Recommended Applications
  • Adhesives/sealants-B&C
  • Asphalt
  • Automotive protective coatings
  • Carpet construction
  • Case and carton closures
  • Film modification
  • Hygiene adhesives
  • Labels non food contact
  • Lubricants
  • Packaging components non food contact
  • Packaging tape
  • Paints & coatings
  • Polymer modification
  • Road markings
  • Roofing ingredients
  • Specialty tape
  • Tape non food contact
  • Wax ingredients
  • Wire/cable

Properties

+
Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
Color, Gardner Molten1.0--
Glass Transition Temperature (Tg)-10 (14)°C (°F)ASTM D 3418
Penetration Hardness18.0dmmASTM D 5
Ring and Ball Softening Point155 (311)°C (°F)ASTM E 28
Viscosity, Brookfield1000.0cPASTM D 3236
Physical Form
Color
Low Color
Compatibility and Solubility

Broad compatibility with numerous elastomers, polymers and tackifying resins. Eastoflex™ APOs have shown to be compatible with the following materials: aliphatic tackifying resins, asphalt, butyl rubber, hydrogenated tackifying resins, low density polyethylene, mineral oil, natural rubber, polybutene, polybutlyene, polypropylene, polyterpene tackifying resins, and SEBS block copolymers.

Packaging & Availability

+
Packaging Information

 

Eastoflex™ P1010PL is available in bags (50-lb net weight), 2,250-lb net weight per pallet. Bags are made of Polypropylene.

Pellets in a box (50-lb net weight), 900-lb net weight per pallet. Boxes are lined with a low-density polyethylene liner.

Pellets are coated with polypropylene to prevent blocking.

Storage & Handling

+
Storage

Due to the thermoplastic behavior, pastillated and flaked resins may fuse, block or lump. This can be accelerated under any of the following conditions: 1) above ambient temperature, 2) prolonged storage, 3) pressure, e.g., stacking pallets, or a combination of these conditions. This is particularly applicable for low softening point resin grades.

In order to maintain the flake or pastille shape, we therefore recommend storing the material in a temperature-controlled area, be careful with stacking material or applying pressure and preventing prolonged storage.

It should be noted that lumping does not have a negative impact on the product specifications. Due to the nature of the product, claims regarding lumping cannot be accepted.

Resins are prone to gradual oxidation, some more so than others. This could result in darkening and/or it could have an adverse effect on the solubility of the resin in organic solvents or on its compatibility with polymers. Accordingly, it is recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first.

Documents (3)

Name
Type
Eastoflex P1010PL Amorphous Polyolefin Sales Specifications Sheet
Other
Eastman EASTOFLEX Amorphous Polyolefins - Wire and Cable Industry
Brochure
Bulk Handling and Storage of Molten EASTOFLEX Amorphous Polyolefins
Brochure