product
product
PENTALYN™ 710-M
Search in

Producer: 
Eastman
Brand: 
PENTALYN
Pentalyn™ 710-M resin is a phenolic modified rosin ester, which offers low viscosity and low solubility in mineral oils. Its properties make it especially recommendable for lithographic inks or offset high brightness inks in quick set systems, or as modifier resin in heat set and flushing.

PENTALYN™ 710-M

Producer: 
Eastman
Brand: 
PENTALYN
Pentalyn™ 710-M resin is a phenolic modified rosin ester, which offers low viscosity and low solubility in mineral oils. Its properties make it especially recommendable for lithographic inks or offset high brightness inks in quick set systems, or as modifier resin in heat set and flushing.
Take Action

Knowde Enhanced TDS

Expand All

+

Identification & Functionality

+

Features & Benefits

+
Labeling Claims
CASE Ingredients Features

Applications & Uses

+
Recommended Applications
  • Adhesives/sealants-B&C
  • Carpet construction
  • Commerical printing inks
  • Film modification
  • Paints & coatings
  • Polymer modification
  • Protective coatings
  • Road markings
  • Roofing ingredients
  • Solder flux
  • Tires
  • Wax ingredients
  • Wire/cable

Properties

+
Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
Acid Number19.0mg KOH/g-
Color, Gardner9+--
Description, Base ResinPhenolic Modified Rosin--
Precipitation Temperature in Magie Oil 470 at 20%95.0°C-
Ring and Ball Softening Point148.0°C-
Viscosity, GardnerY---
Insoluble in
Alcohol
Soluble in
Aromatic Solvents
Slightly soluble in
Mineral oils
Compatibility and Solubility

Pentalyn™ 710-M is compatible with vegetable oils, hydrocarbon resins and other gum rosin resins.

Pentalyn™ 710-M resin has partial solubility in mineral oils, soluble in aromatic solvents (toluene, Xylene) and partial solubility in aliphatic solvents (gas naphtha, gas solvent). This resin is insoluble in alcohols.

Packaging & Availability

+
Packaging Information

Pentalyn™ 710-M is packaged in 25 kgs polyethylene bags, shipped from Eastman's facilities in Uruapan Michoacán in Mexico.

Storage & Handling

+
Storage

Pentalyn™ 710-M resin is provided in pieces which may fuse, block or lump under any of the following conditions: (1) In hot weather climates (2) if stored near steam pipes or other sources of heat; (3) Upon prolonged storage; 4) Placing in very high piles or the combination o them. Storage at temperature above 30°C should be avoided. Inside storage in a temperature-controlled area is necessary in order to prevent problems.

Resins are prone to gradual oxidation, some more so than others. This could result in darkening and/or it could have an adverse affect on the solubility of the resin in organic solvents or in its compatibility with polymers. Accordingly, it is recommended that strict control of inventory be observed at all times, taking care that the oldest materials is used first.

Documents (1)

Name
Type
Pentalyn 710-M Resin Sales Specifications Sheet
Other