• High softening point
• Low odor
• Resistant to thermal degradation
• Very good color stability
• Wide solubility and compatibility range

• Adhesives/sealants-B&C
• Bookbinding
• Caps & lids non-food contact
• Carpet construction
• Case and carton closures
• Commerical printing inks
• Film modification
• Labels non food contact
• Packaging component films
• Packaging components non food contact
• Packaging tape
• Paints & coatings
• Polymer modification
• Protective coatings
• Road markings
• Roofing ingredients
• Solder flux
• Specialty tape
• Tape non food contact
• Tires
• Wax ingredients
• Wire/cable

Compatible with natural rubber, SBR (styrene-butadiene), polychloroprene, EVA (ethylene-vinyl acetate) copolymers, SIS (styrene-isoprene-styrene) and SBS (styrene-butadiene-styrene) block copolymers, low molecular weight polyethylene, paraffin and microcrystalline waxes.

Soluble in aromatic, aliphatic and chlorinated hydrocarbons, esters, ketones, and higher molecular weight alcohols. Insoluble in methanol, ethanol, isopropanol and water.

Packaged in aluminum kraft bags of 25 kg net, and supplied on shrink-wrapped pallets of 30 bags each

Because of the extremely large surface area, flaked forms of resins are prone to gradual oxidation, some more so than others. This could result in darkening and /or could have an adverse effect on solubility in organic solvents. It is strongly recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first. Recommended storage is in original packaging, dry, free from contamination, below 30°C.

Flaked forms of low to medium-softening point resins may fuse, block, or lump:
(1) during hot-weather months,
(2) if stored near steam pipes or other sources of heat, and
(3) upon prolonged storage and compression.

Permalyn™ 5110-C will remain within product specification limits for a period of at least 18 months from the date of manufacture, provided recommended storage conditions are observed.