product
product
Regalite™ S1100
Search in

Producer: 
Eastman
Brand: 
Regalite
Regalite™ S1100 Hydrocarbon Resin is a low molecular weight fully hydrogenated water-white thermoplastic resin derived from petrochemical feedstock. This resin is especially designed as tackifier in hot melt adhesives requiring good color retention upon ageing.

Regalite™ S1100

Producer: 
Eastman
Brand: 
Regalite
Regalite™ S1100 Hydrocarbon Resin is a low molecular weight fully hydrogenated water-white thermoplastic resin derived from petrochemical feedstock. This resin is especially designed as tackifier in hot melt adhesives requiring good color retention upon ageing.
Take Action

Knowde Enhanced TDS

Expand All

+

Features & Benefits

+
CASE Ingredients Features

Applications & Uses

+
Recommended Applications
  • Adhesives/sealants-B&C
  • Bookbinding
  • Carpet construction
  • Case and carton closures
  • Casting wax
  • Commerical printing inks
  • Hygiene adhesives
  • Labels non food contact
  • Polymer modification
  • Protective coatings
  • Specialty tape
  • Tape non food contact
  • Tires

Properties

+
Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
Cloud Point MMAP80.0°C-
Color, Gardnermax. 1-ASTM D 6166
Density at 25°C0.99kg/dm3-
Melt Viscosity at 120°C25000.0cP-
Melt Viscosity at 140°C2500.0cP-
Melt Viscosity at 160°C600.0cP-
Molecular Weight Mn600.0--
Molecular Weight Mw830.0--
Molecular Weight Mw/Mn1.4--
Molecular Weight Mz1200.0--
Ring and Ball Softening Point100.0°CASTM E 28
Insoluble in
Compatibility and Solubility

Very light color, excellent adhesion, good resistance to thermal and oxidative degradation, excellent compatibility.

Soluble at all useful proportions in aliphatic, aromatic, and chlorinated hydrocarbons. Insoluble in alcohols and water.

Compatible at all ratios, or in limited but practically useful proportions, with natural and synthetic rubbers, EVA (ethylene-vinyl acetate) and EBA (Ethylene-butyl acrylate copolymers), APAO (amorphous poly-alphaolefins), SIS (styrene-isoprene-styrene) block copolymers, SBS (styrene-butadiene-styrene) block copolymers, SIBS (styrene-isoprene/butadiene-styrene) block copolymers, SEBS (styrene- ethylene/butylene- styrene) block copolymer, SEPS (styrene-ethylene/propylene-styrene) block copolymer, polyethylene, polypropylene polymers, PIB (polyisobutene) , OBC (olefinic block copolymer), mPE (metallocene catalysed polyethylene)and TPE (thermo plastic elastomers).

Packaging & Availability

+
Packaging Information

Regalite™ S1100 Hydrocarbon Resin is pastillated and packed in polyethylene bags of 20 kg net, and supplied on shrink-wrapped pallets of 50 bags (1000 kg) each, from Eastman facilities in the Netherlands and from warehouses located in Europe.

Regalite™ S1100 Hydrocarbon Resin is supplied in heated, insulated and inerted bulk containers, from Eastman facilities in The Netherlands.

Storage & Handling

+
Storage

Due to the thermoplastic behavior, pastillated and flaked resins may fuse, block or lump. This can be accelerated under any of the following conditions: 1) above ambient temperature, 2) prolonged storage, 3) pressure, e.g., stacking pallets, or a combination of these conditions. This is particularly applicable for low softening point resin grades.

In order to maintain the flake or pastille shape, we therefore recommend storing the material in a temperature-controlled area, be careful with stacking material or applying pressure and preventing prolonged storage.

It should be noted that lumping does not have a negative impact on the product specifications. Due to the nature of the product, claims regarding lumping cannot be accepted.

Resins are prone to gradual oxidation, some more so than others. This could result in darkening and/or it could have an adverse effect on the solubility of the resin in organic solvents or on its compatibility with polymers. Accordingly, it is recommended that strict control of inventory be observed at all times, taking care that the oldest material is used first.

Regalite™ S1100 Hydrocarbon Resin material will remain within product specification limits, as mentioned under the heading "Product Specifications", for a period of at least twelve months after shipment from Eastman production facilities in The Netherlands, provided storage conditions outlined in this data sheet are observed. However, as we can neither anticipate the conditions under which the resin is processed nor the end use applications for which it is used, we recommend that the material be tested upon receipt.

Documents (1)

Name
Type
Regalite S1100 Hydrocarbon Resin Sales Specifications Sheet
Other