Company logo
producer
Eastman
Search:
79 products found for Other Medical Applications in Healthcare & Pharma
With TDS
With SDS

79 products found for Other Medical Applications in Healthcare & Pharma

Tritan™ Mp100 product card banner
PRODUCT

TRITAN

TRITAN™ MP100

Applications: Other Rigid Packaging, Cosmetic Packaging, Other Consumer Goods Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: General Purpose, Rigid Packaging, Medical/Healthcare Applications

Eastman Tritan™ MP100 is an amorphous copolyester that combines excellent clarity and toughness with outstanding heat and chemical resistance. Film and sheet manufactured from this new-generation copolyester can be thermoformed with a wide processing window that allows for product designs that reflect intricate detail. Eastman Tritan™ MP100 copolyester is suitable for use with most forms of sterilization including radiation and ethylene oxide. It is NOT suitable for autoclave/steam sterilization. Eastman Tritan™ MP100 copolyester has been formulated for use in medical film, sheet, and packaging applications.

Tritan™ Mx731 product card banner
PRODUCT

TRITAN

TRITAN™ MX731

Applications: Other Medical Applications, Medical Devices & Assemblies

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Devices

Eastman Tritan™ Copolyester MX731 is an amorphous product with excellent appearance and clarity. Eastman Tritan™ Copolyester MX731 is a high flow medical grade of Eastman Tritan™ that has viscosity reductions of 40-50% relative to Eastman Tritan™ Copolyester MX711. Eastman Tritan™ Copolyester MX731 contains a mold release derived from vegetable based sources. Eastman Tritan™ Copolyester MX731 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Eastman Tritan™ Copolyester MX731 has been formulated for medical devices. Eastman Tritan™ Copolyester MX731 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization.

Eastar™ Mn058 product card banner
PRODUCT

EASTAR

EASTAR™ MN058

Applications: Other Medical Applications, Laboratory & Diagnostics

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Labware

Meets ISO 10993 and/or USP Class VI biocompatibility requirements. Eastar™ Copolyester MN058 is a medical grade base with brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. It has a relatively high flex modulus and yield strength. This product has high flow characteristics. It does not contain a mold release or ultraviolet stabilizer. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Provista™ Copolymer Uvo product card banner
PRODUCT

Provista

Provista™ Copolymer UVO

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polyester (unspecified)

End Uses: Toys, Personal Care, Furniture

Eastman Provista™ UVO is a copolymer with an indoor/outdoor UV package added to prevent yellowing caused by light. Provista™ copolymer is a resin specifically developed for extrusion into profiles where aesthetics like high clarity and gloss, coupled with design flexibility drive demand. Compared to commonly used materials, Eastman Provista™ copolymer can often run on most standard processing equipment at increased speeds. An extremely high melt strength makes the resin an excellent choice when extruding profiles into complicated shapes. This product is certified to ANSI/NSF Standard 51. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Provista™ Copolymer Mp001 product card banner
PRODUCT

Provista

Provista™ Copolymer MP001

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polyester (unspecified)

End Uses: Medical/Healthcare Applications, Tubing

Eastman Provista™ Copolymer MP001 is a resin specifically developed for extrusion into profiles where aesthetics such as high clarity and gloss, coupled with design flexibility, drive demand. Compared to commonly used materials, Eastman Provista™ copolymer runs on most standard processing equipment at increased speeds. An extremely high melt strength makes the resin an excellent choice when extruding profiles into complicated shapes. In addition to profile extrusion, Eastman Provista™ copolymer is an excellent choice for extrusion of rigid tubing. This product meets the biocompatibility requirements under FDA/ISO 10993 and USP Class 6, Plastics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Eastar™ Mn210, Natural product card banner
PRODUCT

EASTAR

EASTAR™ MN210, Natural

Applications: Other Medical Applications, Other Medical & Pharma Packaging

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Packaging

Eastar™ Copolyester MN210 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. This product does not contain a mold release.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Durastar™ Mn631 product card banner
PRODUCT

DURASTAR

DURASTAR™ MN631

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polyester (unspecified)

End Uses: Medical/Healthcare Applications

DuraStar™ Polymer MN631 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. MN631 has very good toughness. Easy to process with minimal drying time, it flows readily and fills the most intricate tools.

Eastar™ Dn003, Natural product card banner
PRODUCT

EASTAR

EASTAR™ DN003, Natural

Applications: Other Medical Applications, Other Consumer Goods Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Eyeglasses

Eastar™ Copolyester DN003 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. DN003 contains a mold release.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Tritan™ Mx730 product card banner
PRODUCT

TRITAN

TRITAN™ MX730

Applications: Other Medical Applications, Medical Devices & Assemblies

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Devices

Eastman Tritan™ MX730 copolyester is an amorphous product with excellent appearance and clarity. Tritan MX730 is a high-flow medical grade of Eastman Tritan™ that has viscosity reductions of 40-50% relative to Eastman Tritan™ MX710 copolyester . Eastman Tritan MX730 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Tritan MX730 has been formulated for medical devices. Tritan MX730 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after gamma and ETO sterilization.

Eastar™ Mn052 product card banner
PRODUCT

EASTAR

EASTAR™ MN052

Applications: Other Medical Applications, Laboratory & Diagnostics

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Labware

Eastar™ Polyester MN052 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Polyester MN052 does not contain a mold release. It has a relatively high flex modulus and yield strength. This product has high flow characteristics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Eastar™ Mb002 product card banner
PRODUCT

EASTAR

EASTAR™ MB002

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Tubing, Pharmaceutical Packaging, Laminates

Eastar™ copolyester MB002 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It is a resin specifically developed for extrusion blow molding containers in medical applications where aesthetics such as high clarity and gloss, coupled with high toughness and chemical resistance, are desirable. Compared to many commonly used materials, Eastar™ copolyester MB002 runs on most standard processing equipment with broader processing conditions, and its toughness and melt strength enable blow molding of larger containers with greater design flexibility. This product meets the biocompatibility requirements under FDA/ISO 10993 and USP Class 6, Plastics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Eastalite™ Copolyester Mp007f product card banner
PRODUCT

EASTALITE

EASTALITE™ Copolyester MP007F

Applications: Other Medical Applications, Other Medical & Pharma Packaging

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Pharmaceutical Packaging, Medical/Healthcare Applications, Medical Packaging

Eastalite™ Foamed Copolyester MP007F with nonporous Eastar™ Copolyester 6763 skins is an opaque, amorphous material with a closed foam structure useful for medical packaging. It is normally white/pearlescent in appearance but may also be colored using Eastman resins and concentrates.

Ecdel™ 9965 product card banner
PRODUCT

ECDEL

ECDEL™ 9965

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Other Thermoplastic Elastomers

Polymer Name: Thermoplastic Elastomer (unspecified)

End Uses: Pharmaceutical Packaging, Medical Packaging, Film

Meets ISO 10993 and/or USP Class VI biocompatibility requirement. Ecdel™ elastomers are medical grade copolyester ethers (COPE) that offer the clarity, toughness, and chemical resistance needed in a variety of flexible packaging including medical and pharmaceutical applications. Ecdel™ elastomer 9965 may be processed on standard injection molding, extrusion blow molding, profile extrusion, extrusion coating, or film extrusion equipment. Ecdel™ elastomers may be extrusion blow molded directly into bags or extruded into film for later fabrication into bags. Ecdel™ elastomers are radiation, electron beam, ethylene oxide, and autoclave sterilization stable. 9965's low inherent viscosity may be helpful for extrusion coating or cast film extrusion applications. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Eastar™ Dn004, Natural product card banner
PRODUCT

EASTAR

EASTAR™ DN004, Natural

Applications: Applicators & Accessories, Stationery & Office Supplies, Sports & Recreation

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Furniture, Medical/Healthcare Applications, Eyeglass Frames

Eastar™ Copolyester DN004 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. DN004 contains a mold release.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Tritan™ Mxf121 product card banner
PRODUCT

TRITAN

TRITAN™ MXF121

Applications: Other Medical Applications, Medical Devices & Assemblies

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Devices

Eastman Tritan™ Copolyester MXF121 is an amorphous opaque product. Eastman Tritan™ Copolyester MXF121 contains a mold release derived from vegetable based sources. Eastman Tritan™ Copolyester MXF121 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Eastman Tritan™ Copolyester MXF121 has been formulated for medical devices. Eastman Tritan™ Copolyester MXF121 has passed FDA/ISO 10993 testing for cytotoxicity, skin sensitization, and intracutaneous reactivity.

Eastar™ Mn059 Natural product card banner
PRODUCT

EASTAR

EASTAR™ MN059 Natural

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

Eastar™ copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. Eastar™ Copolyester MN059 Natural is a medical grade material that contains a mold release.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Eastar™ Mn211 product card banner
PRODUCT

EASTAR

EASTAR™ MN211

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

EASTAR™ MN211 by Eastman is comprised of Copolyester Resin. It is commonly used as Molding Resin for a variety of applications.

Eastar™ Mn021 Natural product card banner
PRODUCT

EASTAR

EASTAR™ MN021 Natural

Applications: Other Medical Applications, Laboratory & Diagnostics

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Labware

Eastar™ Copolyester MN021 Natural has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ copolyester MN021 Natural is a thermoplastic condensation copolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. It has a relatively high flex modulus and yield strength. This product does not contain a mold release. It is a thermoplastic condensation copolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. It has been crystallized. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Tritan™ Mx810 product card banner
PRODUCT

TRITAN

TRITAN™ MX810

Applications: Other Devices & Assemblies, Packaging & Assembly Materials, Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Devices, Encapsulant

Eastman Tritan™ MX810 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan MX810 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization.

Eastar™ Mn004 product card banner
PRODUCT

EASTAR

EASTAR™ MN004

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

Eastar™ Copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. Eastar™ MN004 contains a mold release. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Tritan™ Tx1801 Natural product card banner
PRODUCT

TRITAN

TRITAN™ TX1801 Natural

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

Eastman Tritan™ TX1801 copolyester is an amorphous copolyester specifically developed for use in blow molding applications. Eastman Tritan™ Copolyester TX1801 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. In addition, this new generation copolyester offers excellent appearance and clarity. Eastman Tritan™ Copolyester TX1801 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations.

Tenite™ Propionate 350A4861313 Clear, Trsp product card banner
PRODUCT

TENITE

TENITE™ Propionate 350A4861313 Clear, Trsp

Applications: Other Medical Applications

Product Families: Cellulosics

Chemical Family: Cellulose & Cellulosics

Polymer Name: Cellulose Acetate Propionate (CAP)

End Uses: Medical/Healthcare Applications

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite™ cellulosic plastics are available in natural, clear, selected ambers or smoke transparents and black translucent. Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulose Acetate Propionate 350-13 has a plasticizer level of 13%. It meets FDA requirements for certain food-contact applications when supplied in specific FDA color numbers.

Tenite™ Propionate 360A4861307 Clear, Trsp product card banner
PRODUCT

TENITE

TENITE™ Propionate 360A4861307 Clear, Trsp

Applications: Other Medical Applications

Product Families: Cellulosics

Chemical Family: Cellulose & Cellulosics

Polymer Name: Cellulose Acetate Propionate (CAP)

End Uses: Medical/Healthcare Applications

Tenite™ Propionate 360A4861307 has been tested for USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite™ cellulosic plastics are available in natural, clear, selected ambers or smoke transparents and black translucent. Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulosic Acetate Propionate 360-7 has a plasticizer level of 7%.

Tritan™ Mx711 product card banner
PRODUCT

TRITAN

TRITAN™ MX711

Applications: Other Medical Applications, Medical Devices & Assemblies

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Devices

Eastman Tritan™ Copolyester MX711 is an amorphous product with excellent appearance and clarity. Eastman Tritan™ Copolyester MX711 contains a mold release derived from vegetable based sources. Eastman Tritan™ Copolyester MX711 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. Eastman Tritan™ Copolyester MX711 has been formulated for medical devices. Eastman Tritan™ Copolyester MX711 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization.

Durastar™ Mn611 product card banner
PRODUCT

DURASTAR

DURASTAR™ MN611

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polyester (unspecified)

End Uses: Medical/Healthcare Applications

Durastar™ Polymer MN611 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It contains a mold release to improve ejection. It has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. MN611 has very good toughness.

Durastar™ Mn621 product card banner
PRODUCT

DURASTAR

DURASTAR™ MN621

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polyester (unspecified)

End Uses: Medical/Healthcare Applications

DuraStar™ Polymer MN621 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It contains a mold release to improve ejection. It processes easily and requires minimal drying time. It has superior toughness, high clarity and good chemical resistance.

Eastar™ Mn059 product card banner
PRODUCT

EASTAR

EASTAR™ MN059

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

EASTAR™ MN059 by Eastman is comprised of Copolyester Resin. It is commonly used as Molding Resin for a variety of applications.

Eastar™ Mn006 Natural product card banner
PRODUCT

EASTAR

EASTAR™ MN006 Natural

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

Eastar™ Copolyester MN006 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Copolyester MN006 Natural is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar™ Copolyester MN006 Natural contains a mold release. This polymer is the toughest of the Eastar™ family of products. Additional outstanding features are chemical resistance and excellent color and property retention following gamma and e-beam sterilization. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Provista™ Copolymer Mp002 product card banner
PRODUCT

Provista

Provista™ Copolymer MP002

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polyester (unspecified)

End Uses: Medical/Healthcare Applications, Tubing

Eastman Provista™ Copolymer MP002 is a resin specifically developed for extrusion into profiles for medical applications where aesthetics such as high clarity and gloss, coupled with design flexibility and enhanced toughness, drive demand. Compared to commonly used materials, Eastman Provista™ copolymer runs on most standard processing equipment at increased speeds. Extremely high melt strength makes the resin an excellent choice when extruding profiles into complicated shapes. In addition to profile extrusion, Eastman Provista™> copolymer is an excellent choice for extrusion of rigid tubing. This product meets the biocompatibility requirements under FDA/ISO 10993 and USP Class 6, Plastics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Eastar™ Mn005 product card banner
PRODUCT

EASTAR

EASTAR™ MN005

Applications: Displays, Cosmetic Packaging, Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Personal Care, Decorative Displays, Cosmetics

Eastar™ Copolyester MN005 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Copolyester MN005 has excellent appearance and is nearly water-clear. It is easy to process and can fill intricate tools. Its most outstanding features are exceptional clarity, toughness, radiation resistance chemical resistance and excellent color and property retention following gamma and e-beam sterilization. MN005 contains a mold release. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Tritan™ Mx811 product card banner
PRODUCT

TRITAN

TRITAN™ MX811

Applications: Other Devices & Assemblies, Packaging & Assembly Materials, Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Devices, Encapsulant

Eastman Tritan MX811 is an amorphous copolyester with excellent appearance and clarity. Tritan MX811 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan MX811 has been formulated for medical devices. Tritan MX811 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization.

Provista™ Copolymer Uvi product card banner
PRODUCT

Provista

Provista™ Copolymer UVI

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polyester (unspecified)

End Uses: Personal Care, Medical/Healthcare Applications, Furniture

Eastman Provista™ UVI is a copolymer with an indoor/outdoor UV package added to prevent yellowing caused by light. Eastman Provista™ copolymer is a resin specifically developed for extrusion into profiles where aesthetics like high clarity and gloss, coupled with design flexibility drive demand. Compared to commonly used materials, Eastman Provista™ copolymer can often run on most standard processing equipment at increased speeds. An extremely high melt strength makes the resin an excellent choice when extruding profiles into complicated shapes. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Tenite™ Propionate 350E0096914 Natural, Trsp product card banner
PRODUCT

TENITE

TENITE™ Propionate 350E0096914 Natural, Trsp

Applications: Other Medical Applications

Product Families: Cellulosics

Chemical Family: Cellulose & Cellulosics

Polymer Name: Cellulose Acetate Propionate (CAP)

End Uses: Medical/Healthcare Applications

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite™ cellulosic plastics are available in natural, clear, selected ambers or smoke transparents and black translucent. Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulose Acetate Propionate 350-14 has a plasticizer level of 14%. It meets FDA requirements for certain food-contact applications when supplied in specific FDA color numbers.

Ecdel™ 9966 product card banner
PRODUCT

ECDEL

ECDEL™ 9966

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Other Thermoplastic Elastomers

Polymer Name: Thermoplastic Elastomer (unspecified)

End Uses: Pharmaceutical Packaging, Medical Packaging, Film

Meets ISO 10993 and/or USP Class VI biocompatibility requirement. Ecdel™ elastomers are plasticizer free copolyester elastomers (COPE) that offer clarity, toughness, flexibility, and chemical resistance needed in a variety of flexible packaging including flexible medical and pharmaceutical packaging applications. Ecdel™ elastomers are radiation, electron beam, ethylene oxide, and autoclave sterilization stable. 9966 may be injection molded or extruded. Ecdel™ elastomers may be extrusion blow molded directly into bags or extruded into film for later fabrication into bags. 9966's medium inherent viscosity makes it a good general purpose elastomer. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Tenite™ Propionate 358A4000018 Clear, Trsp product card banner
PRODUCT

TENITE

TENITE™ Propionate 358A4000018 Clear, Trsp

Applications: Other Medical Applications, Other Consumer Goods Applications

Product Families: Cellulosics

Chemical Family: Cellulose & Cellulosics

Polymer Name: Cellulose Acetate Propionate (CAP)

End Uses: Medical/Healthcare Applications, Eyeglasses

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite™ cellulosic plastics are available in natural, clear, selected ambers or smoke transparents and black translucent. Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulose Acetate Propionate 358-18 has a plasticizer level of 18%.

Ecdel™ 9967 product card banner
PRODUCT

ECDEL

ECDEL™ 9967

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Other Thermoplastic Elastomers

Polymer Name: Thermoplastic Elastomer (unspecified)

End Uses: Pharmaceutical Packaging, Personal Care, Medical/Healthcare Applications

Meets ISO 10993 and/or USP Class VI biocompatibility requirement. Ecdel™ elastomers are plasticizer free copolyester elastomers (COPE) that offer clarity, toughness, flexibility, and chemical resistance for flexible packaging including medical and pharmaceutical applications. Ecdel™ elastomer 9967 may be processed on standard injection molding, extrusion blow molding, profile extrusion, extrusion coating, or film extrusion equipment. Ecdel™ elastomers may be extrusion blow molded directly into bags or extruded into blown or cast film for later fabrication into bags. Ecdel™ elastomers are radiation, electron beam, ethylene oxide, and autoclave sterilization stable. 9967's high inherent viscosity may be helpful where good melt strength is required (blown film or profile extrusion). This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.