producer
Company logo
producer
Eastman
Search in
266 products found on Eastman
Selected filters (1):
Physical FormPellets
Clear all
With TDS
With SDS

266 products found on Eastman

Eastman Aq™ 48 Ultra Polymer product card banner
PRODUCT

Eastman AQ

Eastman AQ™ 48 Ultra Polymer

Markets: Color Cosmetics, Hair Care, Other Printing Applications

Technologies: Film Formers, Other Functional Additives, Dispersing & Wetting Additives

Chemical Family: Polyesters

INCI Names: Polyester-5

Eastman AQ™ 48 Ultra polymer is a sulfopolyester that disperses directly in a mixture of ethanol and water at room temperature or in warm water without the assistance of surfactants or other additives. Low-viscosity aqueous dispersions can be prepared at concentrations up to 30% polymer solids. The aqueous or hydroalcoholic dispersions have water-like viscosity at concentrations up to about 20% polymer. AQ polymers aid the dispersion of hydrophobic ingredients in water-based formulations and films formed from the dispersions are clear and glossy at room temperature. AQ 48 Ultra polymer was designed specifically for use as a hair fixative in 55% VOC hairspray. Therefore, it is more compatible with higher levels of alcohol than Eastman AQ™ 38S or 55S, and has good wash out with shampooing. AQ 48 polymer provides excellent hold at high humidity in aerosol and pump hairsprays, as well as in clear styling gels. Eastman AQ 48 has a Tg (glass transition temperature) of about 48°C. AQ 48 polymer is supplied as pellets.

Endex™ 160 Hydrocarbon Resin product card banner
PRODUCT

ENDEX

ENDEX™ 160 Hydrocarbon Resin

Markets: Flexible Packaging Adhesives, Case & Carton Sealing, Case & Carton Sealing

Technologies: Other Resins & Binders

Chemical Family: Acrylics, Acrylates & Methacrylates

A water-white thermoplastic resin made from purified aromatic hydrocarbon monomers. Used to modify the melt flow and increase the temperature resistance of styrenic plastic and rubber. Reinforces the styrene end blocks of styrenic block copolymers. In adhesives Endex™ 160 hydrocarbon resin will associate with the styrenic endblocks, producing higher cohesion at temperatures up to 70°C without affecting tack and adhesion properties. Endex™ 160 hydrocarbon resin has the highest softening point among all hydrocarbon resins available from Eastman Chemical Company.

Eastman Aq™ 38S Polymer product card banner
PRODUCT

Eastman AQ

Eastman AQ™ 38S Polymer

Markets: AP/Deo, Color Cosmetics, Other Beauty & Care

Technologies: Film Formers, Dispersing & Wetting Additives, Polyesters

Chemical Family: Polyesters

INCI Names: Polyester-5

Eastman AQ ™ 38S polymer is a sulfopolyester that disperses directly in hot water without the assistance of amines, cosolvents, surfactants or other additives. AQ 38S polymer aids the dispersion of many hydrophobic ingredients in water-based products and forms clear films at room temperature from aqueous dispersions. Eastman AQ ™polymers differ chiefly in glass transition temperature (Tg) or softening point. As indicated by the number in the product name, Eastman AQ 38S polymer has a Tg of about 38°C. The "S" indicates AQ 38S is supplied as solid pellets. Eastman AQ linear polyesters serve as film formers in numerous cosmetic and personal care applications. Because of its low Tg, Eastman AQ™ 38S forms flexible films on the skin. It imparts a smooth feel to creams, lotions, and sprays and adheres to the skin. Thus, it is useful as a film-former in sunscreen products, providing excellent water resistance. AQ 38 is added to the water phase and aids the emulsification of oil-phase UV absorbers. AQ 38 provides improved coverage for sprayable sunscreens.

Eastman Aq™ 55S Polymer product card banner
PRODUCT

Eastman AQ

Eastman AQ™ 55S Polymer

Markets: Color Cosmetics, Hair Care, Other Beauty & Care

Technologies: Film Formers, Dispersing & Wetting Additives, Polyesters

Chemical Family: Polyesters

INCI Names: Polyester-5

Eastman AQ™ 55S polymer is a sulfopolyester that disperses directly in hot water without the assistance of surfactants or other additives. AQ 55S polymer aids the dispersion of many hydrophobic ingredients in water-based products and forms clear films at room temperature from aqueous dispersions. Eastman AQ ™55S has good film integrity when combined with other cosmetic ingredients and is the preferred AQ polymer to improve water and smudge resistance of water-based makeup and mascaras. In hairstyling products, AQ 55S provides excellent hold under high-humidity conditions and stiffness that is easily modified with plasticizers and thickeners. The "S" indicates AQ 55S is supplied as solid pellets.

Eastar™ Mn006 Natural product card banner
PRODUCT

EASTAR

EASTAR™ MN006 Natural

Markets: Other Medical Applications

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastar™ Copolyester MN006 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Copolyester MN006 Natural is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar™ Copolyester MN006 Natural contains a mold release. This polymer is the toughest of the Eastar™ family of products. Additional outstanding features are chemical resistance and excellent color and property retention following gamma and e-beam sterilization. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Eastar™ Mn021 Natural product card banner
PRODUCT

EASTAR

EASTAR™ MN021 Natural

Markets: Laboratory & Diagnostics, Other Medical Applications

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastar™ Copolyester MN021 Natural has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ copolyester MN021 Natural is a thermoplastic condensation copolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. It has a relatively high flex modulus and yield strength. This product does not contain a mold release. It is a thermoplastic condensation copolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. It has been crystallized. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Tritan™ Tx1800 product card banner
PRODUCT

TRITAN

TRITAN™ TX1800

Markets: Other Consumer Goods Applications

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastman Tritan™ TX 1800 copolyester is an amorphous copolyester specifically developed for use in blow molding and profile extrusion applications. Its most outstanding features are excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. In addition, this new generation copolyester offers excellent appearance and clarity. Eastman Tritan™ TX1800 copolyester may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. This product is certified to NSF/ANSI Standard 51 for Food Equipment Materials.This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Eastar™ Gn046 product card banner
PRODUCT

EASTAR

EASTAR™ GN046

Markets: Food & Beverage Packaging, Bottles & Vials, Cosmetic Packaging

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastar™ Copolyester GN046 is a very high melt strength copolyester targeted for extrusion blow molding applications. Blow molding of large parts (up to several pounds) are possible with this material. This product is certified to ANSI/NSF Standard 51. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Eastar™ Mn052 product card banner
PRODUCT

EASTAR

EASTAR™ MN052

Markets: Laboratory & Diagnostics, Other Medical Applications

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastar™ Polyester MN052 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Polyester MN052 does not contain a mold release. It has a relatively high flex modulus and yield strength. This product has high flow characteristics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Eastar™ 5011 product card banner
PRODUCT

EASTAR

EASTAR™ 5011

Markets: Sports & Recreation, Stationery & Office Supplies

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastar™ Copolyester 5011 is a glycol modified polyethylene terephthalate(PET). The modification is made by adding a second glycol, cyclohexanedimethanol (CHDM) during the polymerization stages. The second glycol is added in the proper proportion to produce an amorphous polymer. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Eastar™ Br001 product card banner
PRODUCT

EASTAR

EASTAR™ BR001

Markets: Cosmetic Packaging, Applicators & Accessories

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastar™ BR001 copolyester has excellent appearance and is nearly water clear. With superior chemical resistance, it maintains its physical properties and appearance when exposed to aromatic oils. BR001 is specifically formulated to provide the optimal combination of chemical resistance, bristle retention, strength, stiffness, processability, clarity, colorability, and feel for toothbrushes. Under existing United States Food and Drug Administration(FDA) regulations, Eastar™ BR001 copolyester may lawfully be used to make food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240(a). Migration tests on BR001 samples meet the compliance requirements of 21 CFR 177.1240(3)(1), (2) and (3). This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Eastar™ Mb002 product card banner
PRODUCT

EASTAR

EASTAR™ MB002

Markets: Food & Beverage Packaging, Housewares, Laboratory & Diagnostics

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastar™ copolyester MB002 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It is a resin specifically developed for extrusion blow molding containers in medical applications where aesthetics such as high clarity and gloss, coupled with high toughness and chemical resistance, are desirable. Compared to many commonly used materials, Eastar™ copolyester MB002 runs on most standard processing equipment with broader processing conditions, and its toughness and melt strength enable blow molding of larger containers with greater design flexibility. This product meets the biocompatibility requirements under FDA/ISO 10993 and USP Class 6, Plastics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Eastar™ Mn058 product card banner
PRODUCT

EASTAR

EASTAR™ MN058

Markets: Laboratory & Diagnostics, Other Medical Applications

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Meets ISO 10993 and/or USP Class VI biocompatibility requirements. Eastar™ Copolyester MN058 is a medical grade base with brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. It has a relatively high flex modulus and yield strength. This product has high flow characteristics. It does not contain a mold release or ultraviolet stabilizer. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Provista™ Copolymer Mp002 product card banner
PRODUCT

Provista

Provista™ Copolymer MP002

Markets: Other Medical Applications, Tubing & Fluids Handling, Other Industrial Applications

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Thermoplastic Polyester

Eastman Provista™ Copolymer MP002 is a resin specifically developed for extrusion into profiles for medical applications where aesthetics such as high clarity and gloss, coupled with design flexibility and enhanced toughness, drive demand. Compared to commonly used materials, Eastman Provista™ copolymer runs on most standard processing equipment at increased speeds. Extremely high melt strength makes the resin an excellent choice when extruding profiles into complicated shapes. In addition to profile extrusion, Eastman Provista™> copolymer is an excellent choice for extrusion of rigid tubing. This product meets the biocompatibility requirements under FDA/ISO 10993 and USP Class 6, Plastics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Tritan™ Txf1021 product card banner
PRODUCT

TRITAN

TRITAN™ TXF1021

Markets: Appliances & Electronics, Other Devices & Assemblies, Housings & Enclosures

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastman Tritan™ TXF1021 copolyester is an amorphous, opaque material offering UL-94 V2 performance with outstanding aesthetics and gloss. Eastman Tritan™ Copolyester TXF1021 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Eastman Tritan™ Copolyester TXF1021 offers improved design flexibility needed in portable consumer electronic devices. Eastman Tritan™ Copolyester TXF1021 has passed testing for skin sensitization. Eastman Tritan™ Copolyester TXF1021 contains a non-halogenated flame retardant.

Cadence™ Gs3 product card banner
PRODUCT

CADENCE

CADENCE™ GS3

Markets: Furniture, Other Automotive Applications, Other Devices & Assemblies

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastman Cadence™ GS3 is a high-melt-strength amorphous copolyester for film calendering. Calendered films made of Eastman Cadence™ copolyesters are non-crystallizing, are halogen-free, offer wide calendering and thermoforming windows and have good low-temperature toughness. They are cooperative in secondary operations such as solvent-bonding, lamination, decoration, cold-forming, punching/cutting and embossment. Eastman Cadence™ resins require no pre-drying or additional stabilizers. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Cadence™ Gs5 product card banner
PRODUCT

CADENCE

CADENCE™ GS5

Markets: Labeling, Other Automotive Applications, Other Devices & Assemblies

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastman Cadence™ GS5 is an amorphous copolyester with improved processability for film calendering. Calendered films made of Eastman Cadence™ copolyester are non-crystallizing, are halogen-free, offer wide calendering and thermoforming windows and have good low-temperature toughness. They are cooperative in secondary operations such as solvent-bonding, lamination, decoration, cold-forming, punching/cutting and embossment. Eastman Cadence™ resins require no pre-drying or additional stabilizers. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Eastar™ Mn005 product card banner
PRODUCT

EASTAR

EASTAR™ MN005

Markets: Other Medical Applications, Cosmetic Packaging, Displays

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastar™ Copolyester MN005 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Copolyester MN005 has excellent appearance and is nearly water-clear. It is easy to process and can fill intricate tools. Its most outstanding features are exceptional clarity, toughness, radiation resistance chemical resistance and excellent color and property retention following gamma and e-beam sterilization. MN005 contains a mold release. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Provista™ Copolyester product card banner
PRODUCT

Provista

Provista™ Copolyester

Markets: Displays, Food & Beverage Packaging, Furniture

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastman Provista™ copolymer is a resin specifically developed for extrusion into profiles where aesthetics like high clarity and gloss, coupled with design flexibility drive demand. Compared to commonly used materials, Eastman Provista™ copolyester can often run on most standard processing equipment at increased speeds. An extremely high melt strength makes the resin an excellent choice when extruding profiles into complicated shapes. This product is certified to ANSI/NSF Standard 51. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Provista™ Copolymer Uvi product card banner
PRODUCT

Provista

Provista™ Copolymer UVI

Markets: Displays, Food & Beverage Packaging, Furniture

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Thermoplastic Polyester

Eastman Provista™ UVI is a copolymer with an indoor/outdoor UV package added to prevent yellowing caused by light. Eastman Provista™ copolymer is a resin specifically developed for extrusion into profiles where aesthetics like high clarity and gloss, coupled with design flexibility drive demand. Compared to commonly used materials, Eastman Provista™ copolymer can often run on most standard processing equipment at increased speeds. An extremely high melt strength makes the resin an excellent choice when extruding profiles into complicated shapes. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Tritan™ Mx811 product card banner
PRODUCT

TRITAN

TRITAN™ MX811

Markets: Other Packaging & Assembly Applications, Medical Devices & Assemblies, Other Medical Applications

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastman Tritan MX811 is an amorphous copolyester with excellent appearance and clarity. Tritan MX811 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan MX811 has been formulated for medical devices. Tritan MX811 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization.

Foralyn™ 90 Ester Of Hydrogenated Rosin product card banner
PRODUCT

FORALYN

FORALYN™ 90 Ester Of Hydrogenated Rosin

Markets: Flexible Packaging Adhesives, Case & Carton Sealing, Case & Carton Sealing

Technologies: Other Resins & Binders

Chemical Family: Alkyds, Esters

Foralyn™ 90 ester of hydrogenated rosin is the glycerol ester of hydrogenated rosin. This resin combines the feature of light initial color and good color retention with the advantages of excellent long-term retention of adhesive properties and UV light stability offered by Staybelite™ and Foral™ esters of hydrogenated rosin.

Eastman Neopentyl Glycol (Npg) Glycol Platelets product card banner
PRODUCT

Eastman Neopentyl Glycol (NPG) Glycol Platelets

Markets: Architectural Coatings, Architectural Coatings, Other Packaging Coatings

Technologies: Esters & Ethers, Functional Additives

UPAC: 2,2-Dimethyl-1,3-PropanediolEastman NPG glycol is the industry standard glycol component in high-quality polyester resins for industrial coatings and fiberglass-reinforced plastics applications. Most polyester resin formulations contain NPG as the sole glycol component, or it is used in conjunction with a modifying glycol to achieve desired properties. NPG and Eastman PTA (Purified Terephthalic Acid) are the primary components for polyester powder coating resins. Eastman NPG delivers the overall toughness, stain and detergent resistance, and outdoor weathering performance required of coil coatings for appliances and products for exterior applications. Gel coats containing unsaturated polyesters made from NPG and Eastman PIA (Purified Isophthalic Acid) provide excellent weatherability and water and stain resistance.Eastman NPG is also used in polyester polyols for polyurethane coatings for the automotive, industrial maintenance, transportation, and aerospace markets.In the United States, neopentyl glycol may be lawfully used as a reactant for coatings and other products intended for use in contact with foods under specific federal food additive regulations.Eastman NPG glycol is available in three forms: Platelets in bags that exhibit excellent caking stability on storage. Bulk molten shipped in tank trucks that require a heated tank for storage. Eastman NPG 90 glycol, a liquid at or above 38°C containing 90 parts NPG and 10 parts water, is delivered in bulk and can be stored at a much lower temperature than molten NPG.

Cadence™ Add5 product card banner
PRODUCT

CADENCE

CADENCE™ ADD5

Markets: Food Films & Packaging, Furniture, Labeling

Technologies: Polyesters & Copolyesters, Functional Additives

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Release additives are required to calender Cadence™ materials. Eastman Cadence™ ADD5 is a high-clarity release additive that is most compatible with Eastman Cadence™ copolyester GS5. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Foralyn™ 110 Ester Of Hydrogenated Rosin product card banner
PRODUCT

FORALYN

FORALYN™ 110 Ester Of Hydrogenated Rosin

Markets: Flexible Packaging Adhesives, Case & Carton Sealing, Case & Carton Sealing

Technologies: Other Resins & Binders

Chemical Family: Alkyds, Esters, Rosins

Foralyn™ 110 ester of hydrogenated rosin is the pentaerythritol ester of hydrogenated rosin. This resin combines the feature of light initial color and good color retention with the advantages of excellent long-term retention of adhesive properties and UV light stability offered by Staybelite™ and Foral™ esters of hydrogenated rosin.

Foral™ 85-E Ester Of Hydrogenated Rosin product card banner
PRODUCT

Foral

Foral™ 85-E Ester Of Hydrogenated Rosin

Markets: Marine Coatings, Marine Coatings, Flexible Packaging Adhesives

Technologies: Functional Additives

Chemical Family: Alkyds, Rosins

Foral™ 85-E ester of hydrogenated rosin is a very pale, thermoplastic ester resin derived from glycerol and a highly stabilized rosin that has outstanding resistance to oxidation, and to discoloration caused by heat and aging.Foral 85-E can be used as a tackifier resin in various types of adhesives, and in protective and barrier-type coatings that require a high degree of color retention and oxidation resistance. It is also used in UV cured acrylics to improve adhesion to low surface energy substrates.

Endex™ 155 Hydrocarbon Resin product card banner
PRODUCT

ENDEX

ENDEX™ 155 Hydrocarbon Resin

Markets: Label & Tape Adhesives, Tapes & Labels, Other Tapes, Labels & Adhesives

Technologies: Other Resins & Binders

Chemical Family: Acrylics, Acrylates & Methacrylates

A water-white thermoplastic resin made from purified aromatic hydrocarbon monomers. Used to modify the melt flow and increase the temperature resistance of styrenic plastic and rubber. Reinforces the styrene end blocks of styrenic block copolymers. In adhesives Endex™ 155 hydrocarbon resin will associate with the styrenic endblocks, producing higher cohesion at temperatures up to 70°C without affecting tack and adhesion properties.

Provista™ Copolymer Mp001 product card banner
PRODUCT

Provista

Provista™ Copolymer MP001

Markets: Other Medical Applications, Tubing & Fluids Handling, Other Industrial Applications

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Thermoplastic Polyester

Eastman Provista™ Copolymer MP001 is a resin specifically developed for extrusion into profiles where aesthetics such as high clarity and gloss, coupled with design flexibility, drive demand. Compared to commonly used materials, Eastman Provista™ copolymer runs on most standard processing equipment at increased speeds. An extremely high melt strength makes the resin an excellent choice when extruding profiles into complicated shapes. In addition to profile extrusion, Eastman Provista™ copolymer is an excellent choice for extrusion of rigid tubing. This product meets the biocompatibility requirements under FDA/ISO 10993 and USP Class 6, Plastics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Cadence™ Add2 product card banner
PRODUCT

CADENCE

CADENCE™ ADD2

Markets: Food Films & Packaging, Exterior & Body, Furniture

Technologies: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Release additives are required to calenderEastman Cadence™ materials. Eastman Cadence™ ADD2 is a high-clarity release additive that is most compatible with Eastman Cadence™ copolyester GS2. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Aerafin™ 180 Polymer product card banner
PRODUCT

AERAFIN

AERAFIN™ 180 Polymer

Markets: Flexible Packaging Adhesives, Case & Carton Sealing, Case & Carton Sealing

Technologies: Polyesters, Functional Additives

Chemical Family: Polyolefins, Polyesters

Aerafin™ 180 polymer is a propylene-based olefin polymer compatible with a range of hydrocarbon tackifying resins and enables spraying or slot applying the finished adhesive at a broad range of temperatures and operating conditions. Aerafin™ 180 polymer is characterized by consistent quality, low color, excellent thermal stability, and low odor.

Foral™ 105-E Ster Of Hydrogenated Rosin product card banner
PRODUCT

Foral

Foral™ 105-E Ster Of Hydrogenated Rosin

Markets: Flexible Packaging Adhesives, Case & Carton Sealing, Case & Carton Sealing

Technologies: Other Resins & Binders

Chemical Family: Alkyds, Rosins

Foral™ 105-E ester of hydrogenated rosin is a pale, thermoplastic ester resin derived from pentaerythritol and a highly stabilized rosin. Like Foral 85-E ester of hydrogenated rosin, which is produced from the same unique oxidation-resistant rosin, Foral 105-E offers advantages as the tackifier or modifier resin in various adhesives and coating compositions. In these applications, both resins exhibit resistance to oxidation and to discoloration caused by heat and aging. Foral 105-E has a substantially higher softening point and is therefore indicated where a harder resin is desired. It is also used in UV cured acrylics to improve adhesion to low surface energy substrates when high tack is not needed.

Eastoflex™ M1030pl-1 product card banner
PRODUCT

EASTOFLEX

EASTOFLEX™ M1030PL-1

Markets: Transportation Assembly, Sealants & Caulks, Sealants & Caulks

Technologies: Other Resins & Binders, Functional Additives

Chemical Family: Polyolefins

Eastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ M1030PL-1 is a blend of propylene homopolymer and copolymers of propylene and ethylene, pelletized and coated with a low-density polyethylene powder. The resulting blend has a melt viscosity of 3,000 mPa·s at 190°C.

Eastoflex™ E1045pl product card banner
PRODUCT

EASTOFLEX

EASTOFLEX™ E1045PL

Markets: Flexible Packaging Adhesives, Case & Carton Sealing, Case & Carton Sealing

Technologies: Other Resins & Binders, Functional Additives

Chemical Family: Polyolefins

Eastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, excellent heat stability, and low color. Eastoflex™ E1045PL is a copolymer of propylene and ethylene, pelletized and coated with a polypropylene powder. It has a melt viscosity of 4,500 mPa•s at 190°C.

Picco™ A140 product card banner
PRODUCT

PICCO

PICCO™ A140

Markets: Marine Coatings, Marine Coatings, Other Printing Applications

Technologies: Other Resins & Binders

Chemical Family: Acrylics, Acrylates & Methacrylates, Hydrocarbons

Picco™ A140 Hydrocarbon Resin is a low molecular weight, amber colored thermoplastic resin produced from petroleum-derived monomers. Picco™ A140 is characterized by its excellent resistance to acids, alkalies and moisture. It shows good color stability and, when formulated with elastomers, a good balance of flex, tear, tack and adhesion properties. This resin is particularly indicated as processing and reinforcing agent in rubber compounds and as binder in protective coatings. Picco™ A140 Hydrocarbon Resin is polymerized under conditions that control its softening point within a narrow range.

Eastoflex™ M1058pl product card banner
PRODUCT

EASTOFLEX

EASTOFLEX™ M1058PL

Markets: Transportation Assembly, Sealants & Caulks, Sealants & Caulks

Technologies: Other Resins & Binders, Functional Additives

Chemical Family: Polyolefins

Eastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ M1058PL is a blend of propylene homopolymer and copolymers of propylene and ethylene, pelletized and coated with a polypropylene powder. The resulting blend has a melt viscosity of 5,800 mPa·s at 190°C.

Eastoflex™ P1010pl product card banner
PRODUCT

EASTOFLEX

EASTOFLEX™ P1010PL

Markets: Transportation Assembly, Sealants & Caulks, Sealants & Caulks

Technologies: Other Resins & Binders, Functional Additives

Chemical Family: Polyolefins

Eastoflex™ Amorphous Polyolefins (APOs) are characteristically saturated, low molecular weight, propylene-based olefin polymers. These products are inherently soft, tacky, and flexible, having a broad compatibility with numerous elastomers, polymers, and tackifying resins. Eastoflex™ APOs are characterized by consistent quality, low odor, good heat stability, and low color. Eastoflex™ P1010PL is a propylene homopolymer, pelletized and coated with a polypropylene powder, having a melt viscosity of 1,000 mPa·s at 190°C.