Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Eastman
All Eastman
Search products
Matching Product Categories
Plastics
Markets
Certifications & Compliance
Labeling Claims
Physical Form
Regional Availability
All Filters
88 Products found on Eastman
Most Viewed
TRITAN™ TX1001
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Additives Included:
Mold Release Agent
Flexural Modulus:
1551.0 - 1551.0 MPa
Eastman Eastman Tritan™ TX1001 is an amorphous copolyester with excellent appearance and clarity. Tritan TX1001 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan TX1001 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan TX1001 is certified to NSF/ANSI Standard 51 for Food Equipment Materials and is also certified to NSF/ANSI Standard 61 – Drinking Water System Components-Health Effects.
TRITAN™ TX2001
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Additives Included:
Mold Release Agent
Flexural Modulus:
1585.0 - 1585.0 MPa
Eastman Eastman Tritan TX2001 is an amorphous copolyester with excellent appearance and clarity. Tritan TX2001 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity, and aggressive cleaning agents. Tritan TX2001 copolyester may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan TX2001 is certified to NSF/ANSI Standard 51 for Food Equipment Materials and is also certified to NSF/ANSI Standard 61 – Drinking Water System Components-Health Effects.
EASTAR™ MN058
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Flexural Modulus:
2413.0 - 2413.0 MPa
Eastman EASTAR™ MN058 is a medical grade base with brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. It has a relatively high flex modulus and yield strength. This product has high flow characteristics. It does not contain a mold release or ultraviolet stabilizer. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
Eastalloy™ DA003-8999K
Polymer Name:
PC/Polyester Alloy
Processing Methods:
Injection Molding
Eastman Eastalloy™ DA003-8999K is a clear copolyester/polycarbonate alloy. This product has good impact strength, chemical resistance, dimensional stability and low shrinkage rates. DA003-8999K can be molded into thick-walled parts with essentially no crystalline haze generation.
DURASTAR™ DS1910HF
Polymer Name:
Polyester (unspecified)
Processing Methods:
Injection Molding
Additives Included:
Mold Release Agent
Flexural Modulus:
1862.0 - 1862.0 MPa
Eastman Durastar™ DS1910HF polymer is a high flow grade of Durastar™ that contains a mold release. Durastar™ DS1910HF flow lengths are increased 20-40% relative to Durastar™ DS1010 as shown by spiral flow testing. Other outstanding features of Durastar™ are easily maintained such as excellent appearance and clarity, good physical properties, chemical resistance, and easy processing. This high flow product is especially suited for those applications utilizing thin-walled intricate tools. Under existing United States Food and Drug Administration (FDA) regulations, Durastar™ DS1910HF may be used in food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240.This product is certified to ANSI/NSF Standard 51.
EASTAR™ DN011
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Additives Included:
Mold Release Agent
Flexural Modulus:
1793.0 - 1793.0 MPa
Eastman Eastar™ Copolyester DN011 is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar™ Copolyester DN011 contains a mold release.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.This product has been CRADLE TO CRADLE CERTIFIED(cm)The CRADLE TO CRADLE CERTIFIED(cm) Mark is a registered certification mark used under license through McDonough Braungart Design Chemistry (MBDC). MBDC is a global sustainability consulting and product certification firm. The CRADLE TO CRADLE® framework moves beyond the traditional goal of reducing the negative impacts of commerce (‘eco-efficiency'), to a new paradigm of increasing its positive impacts (‘eco-effectiveness'). At its core, Cradle to Cradle design perceives the safe and productive processes of nature's ‘biological metabolism' as a model for developing a ‘technical metabolism' flow of industrial materials. Product components can be designed for continuous recovery and reutilization as biological and technical nutrients within these metabolisms. For more information about MBDC and to obtain printable certificates for Eastman Copolyesters, visit http://www.mbdc.com.
EASTAR™ DN003, Natural
Polymer Name:
Copolyester Resin
Processing Methods:
Extrusion, Injection Molding
Additives Included:
Mold Release Agent
Eastman Eastar™ Copolyester DN003 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. DN003 contains a mold release.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
DURASTAR™ DS3010HF
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Additives Included:
Mold Release Agent
Flexural Modulus:
1793.0 - 1793.0 MPa
Eastman DuraStar™ DS3010HF copolyester is a high flow product that contains a mold release. Its most outstanding features are excellent color and clarity and the ability to process at lower melt temperatures than typical copolyesters. Other outstanding features of DS3010HF are excellent chemical resistance, high gloss, and improvements in processing such as faster drying times, faster cycle times, and lower scrap rates.
TRITAN™ TX1800
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Blow Molding, Blow Molding, Stretch Blow Injection Molding, Profile Extrusion
Additives Included:
Mold Release Agent
Flexural Modulus:
1522.0 - 1522.0 MPa
Eastman Eastman Tritan™ TX 1800 copolyester is an amorphous copolyester specifically developed for use in blow molding and profile extrusion applications. Its most outstanding features are excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. In addition, this new generation copolyester offers excellent appearance and clarity. Eastman Tritan™ TX1800 copolyester may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. This product is certified to NSF/ANSI Standard 51 for Food Equipment Materials.This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.
EASTAR™ MN210, Natural
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Eastman Eastar™ Copolyester MN210 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. This product does not contain a mold release.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
TRITAN™ VX351HF
Polymer Name:
Copolyester Resin
Processing Methods:
Film Extrusion, Injection Molding
Flexural Modulus:
1590.0 - 1590.0 MPa
Eastman Tritan VX351HF is an amorphous copolyester with excellent clarity and impact resistance. The outstanding chemical resistance, hydrolytic stability, and ease of processing make Tritan™ VX351HF an ideal candidate for a broad spectrum of optical applications such sunglass lenses, optical glass lenses and safety eyewear.
EASTAR™ MN059 Natural
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Additives Included:
Mold Release Agent
Eastman Eastar™ copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. Eastar™ Copolyester MN059 Natural is a medical grade material that contains a mold release.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
EASTAR™ EB062
Polymer Name:
Copolyester Resin
Processing Methods:
Blow Molding
Flexural Modulus:
1900.0 - 1900.0 MPa
Eastman Eastar™ Copolyester EB062 is a resin specifically developed for extrusion blown bottles where esthetics such as high clarity and gloss, coupled with design flexibility, drive demand particularly in packaging for cosmetics and personal care. Compared to commonly used materials, Eastar™ copolyester EB062 runs on most standard processing equipment. Extremely high melt strength makes the resin an excellent choice when manufacturing bottles. This product offers improved toughness, melt strength, chemical resistance, excellent color, and clarity in thick-walled applications. Eastar™ Copolyester EB062 is certified to NSF/ANSI Standard 51 for Food Equipment Materials. Eastar EB062 is cleared for various food contact applications (including contact with most alcoholic beverages) by FCN No. 1234 as described in the Food and Drug Administration (FDA) Inventory of Effective Food Contact Substance Notifications and may be used in full compliance with the United States Federal Food and Drug, and Cosmetic Act, provided that it is used within the limitations set forth for FCN 1234. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.
EASTAR™ DN004, Natural
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Additives Included:
Mold Release Agent
Eastman Eastar™ Copolyester DN004 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. DN004 contains a mold release.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
Eastalloy™ DA510
Polymer Name:
PC/Polyester Alloy
Processing Methods:
Injection Molding
Density:
1200.0 - 1200.0 kg/m³
Flexural Modulus:
2100.0 - 2100.0 MPa
Eastalloy™ Polymer DA510 is a clear copolyester/polycarbonate alloy. This product has good impact strength, chemical resistance, heat resistance, dimensional stability, and low mold shrinkage.
SPECTAR™ Stratus Copolyester
Polymer Name:
Copolyester Resin
Processing Methods:
Machining
Eastman Eastman Spectar Stratus copolyester was formulated specifically for the lighting market. Spectar Stratus brings your projects to light with excellent diffusion and high light transmission and superb processability. Light diffuser sheets made with Spectar Stratus can be bent hot or cold and polished with commercial edge-finishing equipment, sanding, solvents, flames, or buffing to produce finished edges—and brilliant designs. It can be laser cut, routed, welded, drilled, die-punched, or joined by screws, rivets, or bolts. It can also be cut on conventional table, band, or radial-arm saws with blades commonly used for plastic. Spectar Stratus can be vacuum-formed at lower temperatures than other plastics without pre-drying the sheet. It forms clear, strong bonds with commercially available cements and solvents. It accepts screen-printing, painting, laser-marking, and hot-stamping easily. Surface scratches or scuff marks can be removed using a common heat gun. Best of all, lighting applications made with Spectar Stratus are made tough—durable enough to survive heavy-use and harsh environments, and is resistant to a variety of chemicals and cleaners. Because of this outstanding toughness, designers can insist on thinner designs without compromising performance. Click here to access the Spectar Stratus brochure for more information.
TRITAN™ TX1500HF
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Flexural Modulus:
1575.0 - 1575.0 MPa
Eastman Eastman Tritan™ TX1500HF copolyester is a high flow grade of Eastman Tritan. Tritan TX1500HF has viscosity reductions of 40-50% relative to Tritan TX1000. Other outstanding features include good toughness, hydrolytic stability, and heat and chemical resistance. Tritan TX1500HF may be used in repeated use food contact articles under United States Food and Drug Administration (FDA)regulations. Tritan TX1500HF is certified to NSF/ANSI Standard 51 for Food and Equipment Materials.
TRITAN™ TX2000
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Flexural Modulus:
1585.0 - 1585.0 MPa
Eastman Eastman Tritan TX2000 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity, and aggressive cleaning detergents. Tritan TX2000 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan TX2000 is certified to NSF/ANSI Standard 51 for Food Equipment Materials.This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.
EASTAR™ CN015 Natural
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Additives Included:
Mold Release Agent
Flexural Modulus:
1800.0 - 1800.0 MPa
Eastman Eastar™ CN015 copolyester is a high flow product that contains a mold release. It is the first copolyester resin from Eastman that has been designed and engineered specifically for cosmetics packaging applications. With its unsurpassed color and clarity and an unmatched ability to mold thick parts with improved gate esthetics, Eastar™ CN is clearly the most suited copolyester for premium cosmetics packaging. Other oustanding features of Eastar™ CN are excellent chemical resistance, high gloss, and improvements in processing such as faster drying times, faster cycle times, and lower scrap rates. Eastar™ CN is also ideally suited for two-shot molding techniques due to its lower processing temperatures, very slow crystallization rate, and flow characteristics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.
EASTAR™ MN004
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Additives Included:
Mold Release Agent
Flexural Modulus:
1800.0 - 1800.0 MPa
Eastman Eastar™ Copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. Eastar™ MN004 contains a mold release. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
TRITAN™ MX711
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Additives Included:
Mold Release Agent
Flexural Modulus:
1551.0 - 1551.0 MPa
Eastman Eastman Tritan™ Copolyester MX711 is an amorphous product with excellent appearance and clarity. Eastman Tritan™ Copolyester MX711 contains a mold release derived from vegetable based sources. Eastman Tritan™ Copolyester MX711 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. Eastman Tritan™ Copolyester MX711 has been formulated for medical devices. Eastman Tritan™ Copolyester MX711 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization.
TRITAN™ EX401
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding, Injection Blow Molding, Blow Molding, Stretch Blow Injection Molding
Additives Included:
Mold Release Agent
Flexural Modulus:
1585.0 - 1585.0 MPa
Eastman Tritan EX401, specifically developed for the Infant Care market, is an amorphous copolyester with excellent appearance and clarity. Tritan EX401 contains a mold release derived from vegetable based sources. Its most outstanding features are clarity, excellent toughness, hydrolytic stability, and heat and chemical resistance. Tritan EX401 meets infant care sterilization requirements via boiling water or microwave steam sterilization. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity, and aggressive cleaning agents. Tritan EX401 can be converted into parts using injection molding, injection stretch blow molding (ISBM), and extrusion blow molding techniques. Tritan EX401 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Contact Eastman representative for details on global food contact regulatory clearances. Tritan EX401 is included in Eastman Chemical Company’s Customer Notification Procedure which details our policy for customer notification when significant changes are made in Tritan EX401 sold into the infant care market. This procedure provides the infant care industry an added layer of confidence in the consistent quality and performance of Tritan.
TRITAN™ MX810
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Flexural Modulus:
1585.0 - 1585.0 MPa
Eastman Eastman Tritan™ MX810 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan MX810 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization.
TRITAN™ LX151HF
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Blow Molding, Blow Molding, Injection Molding
Additives Included:
Mold Release Agent
Flexural Modulus:
1575.0 - 1575.0 MPa
Eastman Eastman Tritan™ LX151HF is a high flow grade of an amorphous copolyester with excellent appearance and clarity. Eastman Tritan™ LX151HF has viscosity reductions of 40-50% relative to standard grades of Eastman Tritan™. Eastman Tritan™ LX151HF contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. Tritan™ LX151HF was developed for the cosmetic, fragrance, and personal care markets. Tritan™ LX151HF can easily be converted into articles for application in consumer and personal care markets by injection molding, extrusion blow molding, and injection blow molding.
TRITAN™ TX1000
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Flexural Modulus:
1551.0 - 1551.0 MPa
Eastman Eastman Tritan TX1000 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Eastman Tritan™ copolyester’s outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan TX1000 copolyester may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan TX1000 is certified to NSF/ANSI Standard 51 for Food Equipment Materials. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.
TRITAN™ LX201
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Blow Molding, Blow Molding, Injection Molding
Additives Included:
Mold Release Agent
Flexural Modulus:
1572.0 - 1572.0 MPa
Eastman Eastman Tritan™ LX201 is an amorphous copolyester with excellent appearance and clarity. Tritan™ LX201 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. Tritan™ LX201 was developed for the cosmetic, fragrance, and personal care markets. Tritan™ LX201 can easily be converted into articles for application in Consumer and Personal Care markets by injection molding, extrusion blow molding, and injection blow molding.
TRITAN™ WX500
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Blow Molding, Blow Molding
Flexural Modulus:
1522.0 - 1522.0 MPa
Eastman Eastman Tritan™ WX500 copolyester is a resin specifically developed for blow molded bottles. Extremely high melt strength makes the resin an excellent choice when manufacturing large bottles. This new-generation copolyester most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. Tritan WX500 copolyester may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations.This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.
TRITAN™ LX200
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Blow Molding, Blow Molding, Injection Molding
Flexural Modulus:
1585.0 - 1585.0 MPa
Eastman Eastman Tritan™ LX200 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. Eastman Tritan™ LX200 was developed for the cosmetic, fragrance, and personal care markets. Tritan™ LX200 can easily be converted into articles for application in Consumer and Personal Care markets by injection molding, extrusion blow molding, and injection blow molding.
SPECTAR™ Copolyester 14471
Polymer Name:
Copolyester Resin
Processing Methods:
Thermoforming
Eastman Eastman Spectar™ copolyester (PETG) extrudes into plastic sheet that is sparkling clear, tough, chemically resistant, odor-free, versatile, easy to work with and affordable. Its toughness allows fabricators to use thinner-gage sheet than with other common materials, resulting in lower material costs. Yet it can be extruded into sheets as thick as 12 mm (1/2 in.). It extrudes at a low temperature and will not crystallize or develop a crystalline haze. Cleaning solutions will not turn Eastman Spectar™ copolyester white. It is easy to fabricate, allowing greater design freedom. It can be laser cut, routed, welded, drilled, die-punched, bent hot or cold, or joined by screws, rivets, or bolts. It can also be cut on conventional table, band, or radial-arm saws with blades commonly used for plastic. Spectar™ copolyester can be vacuum-formed at lower temperatures than other plastics without predrying the sheet. Eastman Spectar™ copolyester can be finished easily. Its edges can be polished by using commercial edge-finishing equipment, sanding, solvents, flame-polishing or buffing. It forms clear, strong bonds with commercially available cements and solvents. It accepts screen-printing, painting, and hot-stamping easily. Surface scratches or scuff marks can be removed using a common heat gun.Sheet made from Eastman Spectar™ copolyester (PETG) is available from plastic sheet distributors throughout North America, Canada, Europe, Asia, and Latin America.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.GREENGUARD Certification recognizes Eastman for manufacturing products with low chemical and particle emissions for better indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.This product is certified to NSF/ANSI Standard 51 for Food Equipment Materials.This product has been CRADLE TO CRADLE CERTIFIED Silver.The CRADLE TO CRADLE CERTIFIED Mark is a registered certification mark used under license through McDonough Braungart Design Chemistry (MBDC). MBDC is a global sustainability consulting and product certification firm. The CRADLE TO CRADLE® framework moves beyond the traditional goal of reducing the negative impacts of commerce ('eco-efficiency'), to a new paradigm of increasing its positive impacts ('eco-effectiveness'). At its core, Cradle to Cradle design perceives the safe and productive processes of nature's 'biological metabolism' as a model for developing a 'technical metabolism' flow of industrial materials. Product components can be designed for continuous recovery and reutilization as biological and technical nutrients within these metabolisms. For more information about MBDC and to obtain printable certificates for Eastman Copolyesters, visit www.mbdc.com. Choose Eastman Chemical Company under Company Name in C2C Certified products to display a list of our products.
EASTAR™ DN001, Natural
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Eastman Eastar™ copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. DN001 is a base material without mold release or ultra-violet inhibitors(UVI).This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
EASTAR™ DN114, Natural
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Additives Included:
UV Stabilizer, Mold Release Agent
Eastman Eastar™ copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage. DN114 contains an ultraviolet light inhibitor and a mold release.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
TENITE™ Propionate 383A4000011
Polymer Name:
Cellulose Acetate Propionate (CAP)
Additives Included:
Plasticizer (Unspecified), Mold Release Agent
Density:
1200.0 - 1200.0 kg/m³
End Uses:
Appliances
TENITE™ Propionate 383A4000011 by Eastman is comprised of Cellulose Acetate Propionate. It is commonly used It is available in Pellets form.
TRITAN™ MX710
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Flexural Modulus:
1551.0 - 1551.0 MPa
Eastman Eastman Tritan™ Copolyester MX710 is an amorphous product with excellent appearance and clarity. Eastman Tritan™ Copolyester MX710 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. Eastman Tritan™ Copolyester MX710 has been formulated for medical devices.
EASTAR™ DN010
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Flexural Modulus:
1800.0 - 1800.0 MPa
Eastman Eastar™ Copolyester DN010 is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar™ Copolyester DN010 contains no mold release. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.
EASTAR™ MN006 Natural
Polymer Name:
Copolyester Resin
Processing Methods:
Injection Molding
Additives Included:
Mold Release Agent
Flexural Modulus:
1800.0 - 1800.0 MPa
Eastman Eastar™ Copolyester MN006 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Copolyester MN006 Natural is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar™ Copolyester MN006 Natural contains a mold release. This polymer is the toughest of the Eastar™ family of products. Additional outstanding features are chemical resistance and excellent color and property retention following gamma and e-beam sterilization. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
DURASTAR™ DS2010
Polymer Name:
Polyester (unspecified)
Processing Methods:
Injection Molding
Additives Included:
Mold Release Agent
Flexural Modulus:
1896.0 - 1896.0 MPa
Eastman Durastar™ DS2010 polymer contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. DS2010 has very good toughness as shown by Izod impact resistance. Exposure to aromatic oils often causes crazing or actual fracture of many polymer resins, but DS2010 maintains its physical properties when exposed to these oils, and its appearance is virtually unchanged. Easy to process, it flows readily and fills intricate molds. Under existing United States Food and Drug Administration (FDA) regulations, Durastar™ DS2010 may be used in food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240. This product is certified to ANSI/NSF Standard 51.
Show
36
of 88 results
1
2
3