Company logo
producer
Eastman
Search:
28 products found on Eastman
Selected filters (1):
FeaturesRadiation (Gamma) Resistant
Clear all
With TDS
With SDS

28 products found on Eastman

Tritan™ Mx731 product card banner
PRODUCT

TRITAN

TRITAN™ MX731

Applications: Other Medical Applications, Medical Devices & Assemblies

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Devices

Eastman Tritan™ Copolyester MX731 is an amorphous product with excellent appearance and clarity. Eastman Tritan™ Copolyester MX731 is a high flow medical grade of Eastman Tritan™ that has viscosity reductions of 40-50% relative to Eastman Tritan™ Copolyester MX711. Eastman Tritan™ Copolyester MX731 contains a mold release derived from vegetable based sources. Eastman Tritan™ Copolyester MX731 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Eastman Tritan™ Copolyester MX731 has been formulated for medical devices. Eastman Tritan™ Copolyester MX731 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization.

Eastar™ Mn058 product card banner
PRODUCT

EASTAR

EASTAR™ MN058

Applications: Other Medical Applications, Laboratory & Diagnostics

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Labware

Meets ISO 10993 and/or USP Class VI biocompatibility requirements. Eastar™ Copolyester MN058 is a medical grade base with brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. It has a relatively high flex modulus and yield strength. This product has high flow characteristics. It does not contain a mold release or ultraviolet stabilizer. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Durastar™ Mn631 product card banner
PRODUCT

DURASTAR

DURASTAR™ MN631

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polyester (unspecified)

End Uses: Medical/Healthcare Applications

DuraStar™ Polymer MN631 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. MN631 has very good toughness. Easy to process with minimal drying time, it flows readily and fills the most intricate tools.

Tritan™ Mx730 product card banner
PRODUCT

TRITAN

TRITAN™ MX730

Applications: Other Medical Applications, Medical Devices & Assemblies

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Devices

Eastman Tritan™ MX730 copolyester is an amorphous product with excellent appearance and clarity. Tritan MX730 is a high-flow medical grade of Eastman Tritan™ that has viscosity reductions of 40-50% relative to Eastman Tritan™ MX710 copolyester . Eastman Tritan MX730 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Tritan MX730 has been formulated for medical devices. Tritan MX730 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after gamma and ETO sterilization.

Eastar™ Mn052 product card banner
PRODUCT

EASTAR

EASTAR™ MN052

Applications: Other Medical Applications, Laboratory & Diagnostics

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Labware

Eastar™ Polyester MN052 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Polyester MN052 does not contain a mold release. It has a relatively high flex modulus and yield strength. This product has high flow characteristics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Eastar™ Mb002 product card banner
PRODUCT

EASTAR

EASTAR™ MB002

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Tubing, Pharmaceutical Packaging, Laminates

Eastar™ copolyester MB002 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It is a resin specifically developed for extrusion blow molding containers in medical applications where aesthetics such as high clarity and gloss, coupled with high toughness and chemical resistance, are desirable. Compared to many commonly used materials, Eastar™ copolyester MB002 runs on most standard processing equipment with broader processing conditions, and its toughness and melt strength enable blow molding of larger containers with greater design flexibility. This product meets the biocompatibility requirements under FDA/ISO 10993 and USP Class 6, Plastics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Ecdel™ 9965 product card banner
PRODUCT

ECDEL

ECDEL™ 9965

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Other Thermoplastic Elastomers

Polymer Name: Thermoplastic Elastomer (unspecified)

End Uses: Pharmaceutical Packaging, Medical Packaging, Film

Meets ISO 10993 and/or USP Class VI biocompatibility requirement. Ecdel™ elastomers are medical grade copolyester ethers (COPE) that offer the clarity, toughness, and chemical resistance needed in a variety of flexible packaging including medical and pharmaceutical applications. Ecdel™ elastomer 9965 may be processed on standard injection molding, extrusion blow molding, profile extrusion, extrusion coating, or film extrusion equipment. Ecdel™ elastomers may be extrusion blow molded directly into bags or extruded into film for later fabrication into bags. Ecdel™ elastomers are radiation, electron beam, ethylene oxide, and autoclave sterilization stable. 9965's low inherent viscosity may be helpful for extrusion coating or cast film extrusion applications. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Eastar™ Mn211 product card banner
PRODUCT

EASTAR

EASTAR™ MN211

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

EASTAR™ MN211 by Eastman is comprised of Copolyester Resin. It is commonly used as Molding Resin for a variety of applications.

Tritan™ Mx711 product card banner
PRODUCT

TRITAN

TRITAN™ MX711

Applications: Other Medical Applications, Medical Devices & Assemblies

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Devices

Eastman Tritan™ Copolyester MX711 is an amorphous product with excellent appearance and clarity. Eastman Tritan™ Copolyester MX711 contains a mold release derived from vegetable based sources. Eastman Tritan™ Copolyester MX711 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. Eastman Tritan™ Copolyester MX711 has been formulated for medical devices. Eastman Tritan™ Copolyester MX711 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization.

Durastar™ Mn611 product card banner
PRODUCT

DURASTAR

DURASTAR™ MN611

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polyester (unspecified)

End Uses: Medical/Healthcare Applications

Durastar™ Polymer MN611 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It contains a mold release to improve ejection. It has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. MN611 has very good toughness.

Durastar™ Mn621 product card banner
PRODUCT

DURASTAR

DURASTAR™ MN621

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polyester (unspecified)

End Uses: Medical/Healthcare Applications

DuraStar™ Polymer MN621 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It contains a mold release to improve ejection. It processes easily and requires minimal drying time. It has superior toughness, high clarity and good chemical resistance.

Eastar™ Mn005 product card banner
PRODUCT

EASTAR

EASTAR™ MN005

Applications: Displays, Cosmetic Packaging, Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Personal Care, Decorative Displays, Cosmetics

Eastar™ Copolyester MN005 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Copolyester MN005 has excellent appearance and is nearly water-clear. It is easy to process and can fill intricate tools. Its most outstanding features are exceptional clarity, toughness, radiation resistance chemical resistance and excellent color and property retention following gamma and e-beam sterilization. MN005 contains a mold release. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Tritan™ Mx811 product card banner
PRODUCT

TRITAN

TRITAN™ MX811

Applications: Other Devices & Assemblies, Packaging & Assembly Materials, Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Devices, Encapsulant

Eastman Tritan MX811 is an amorphous copolyester with excellent appearance and clarity. Tritan MX811 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan MX811 has been formulated for medical devices. Tritan MX811 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization.

Ecdel™ 9966 product card banner
PRODUCT

ECDEL

ECDEL™ 9966

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Other Thermoplastic Elastomers

Polymer Name: Thermoplastic Elastomer (unspecified)

End Uses: Pharmaceutical Packaging, Medical Packaging, Film

Meets ISO 10993 and/or USP Class VI biocompatibility requirement. Ecdel™ elastomers are plasticizer free copolyester elastomers (COPE) that offer clarity, toughness, flexibility, and chemical resistance needed in a variety of flexible packaging including flexible medical and pharmaceutical packaging applications. Ecdel™ elastomers are radiation, electron beam, ethylene oxide, and autoclave sterilization stable. 9966 may be injection molded or extruded. Ecdel™ elastomers may be extrusion blow molded directly into bags or extruded into film for later fabrication into bags. 9966's medium inherent viscosity makes it a good general purpose elastomer. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Ecdel™ 9967 product card banner
PRODUCT

ECDEL

ECDEL™ 9967

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Other Thermoplastic Elastomers

Polymer Name: Thermoplastic Elastomer (unspecified)

End Uses: Pharmaceutical Packaging, Personal Care, Medical/Healthcare Applications

Meets ISO 10993 and/or USP Class VI biocompatibility requirement. Ecdel™ elastomers are plasticizer free copolyester elastomers (COPE) that offer clarity, toughness, flexibility, and chemical resistance for flexible packaging including medical and pharmaceutical applications. Ecdel™ elastomer 9967 may be processed on standard injection molding, extrusion blow molding, profile extrusion, extrusion coating, or film extrusion equipment. Ecdel™ elastomers may be extrusion blow molded directly into bags or extruded into blown or cast film for later fabrication into bags. Ecdel™ elastomers are radiation, electron beam, ethylene oxide, and autoclave sterilization stable. 9967's high inherent viscosity may be helpful where good melt strength is required (blown film or profile extrusion). This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Durastar™ Mn630 product card banner
PRODUCT

DURASTAR

DURASTAR™ MN630

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polyester (unspecified)

End Uses: Medical/Healthcare Applications

DuraStar™ Copolyester MN630 does not contain a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding feature is its high flow characteristic, with the ability to fill intricate tooling. It is easy to process with minimal drying time and has good toughness and chemical resistance.

Eastar™ Mn200, Natural product card banner
PRODUCT

EASTAR

EASTAR™ MN200, Natural

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

Eastar™ Copolyester MN200 is an amorphous copolyester with excellent flow characteristics as well as radiation resistance and chemical resistance.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Tritan™ Mx710 product card banner
PRODUCT

TRITAN

TRITAN™ MX710

Applications: Medical Devices & Assemblies, Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical Devices, Medical/Healthcare Applications

Eastman Tritan™ Copolyester MX710 is an amorphous product with excellent appearance and clarity. Eastman Tritan™ Copolyester MX710 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. Eastman Tritan™ Copolyester MX710 has been formulated for medical devices.

Eastar™ 6763 product card banner
PRODUCT

EASTAR

EASTAR™ 6763

Applications: Other Rigid Packaging, Sports & Recreation, Shrink Films

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Toys, Thin Walled Packaging, Sporting Goods

Eastar™ copolyester 6763 is a clear, amorphous material. Because of its clarity, toughness and good melt strength at processing temperatures, it is useful in a variety of processing techniques including film and sheet extrusion. Eastar™ Copolyester 6763 may be colored using color concentrates, dry colors or liquid colorants.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.This product has been CRADLE TO CRADLE CERTIFIED Silver.The CRADLE TO CRADLE CERTIFIED Mark is a registered certification mark used under license through McDonough Braungart Design Chemistry (MBDC). MBDC is a global sustainability consulting and product certification firm. The CRADLE TO CRADLE® framework moves beyond the traditional goal of reducing the negative impacts of commerce ('eco-efficiency'), to a new paradigm of increasing its positive impacts ('eco-effectiveness'). At its core, Cradle to Cradle design perceives the safe and productive processes of nature's 'biological metabolism' as a model for developing a 'technical metabolism' flow of industrial materials. Product components can be designed for continuous recovery and reutilization as biological and technical nutrients within these metabolisms. For more information about MBDC and to obtain printable certificates for Eastman Copolyesters, visit www.mbdc.com. Choose Eastman Chemical Company under Company Name in C2C Certified products to display a list of our products.

Tenite™ Propionate 360A4861307 product card banner
PRODUCT

TENITE

TENITE™ Propionate 360A4861307

Applications: Other Medical Applications

Product Families: Cellulosics

Chemical Family: Cellulose & Cellulosics

Polymer Name: Cellulose Acetate Propionate (CAP)

End Uses: Medical/Healthcare Applications

Eastar™ Dn004 product card banner
PRODUCT

EASTAR

EASTAR™ DN004

Applications: Cold-Chain & Insulation, Appliances & Electronics, Sports & Recreation

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Sporting Goods, Refrigeration

EASTAR™ DN004 by Eastman is comprised of Copolyester Resin. It is commonly used as Molding Resin for a variety of applications.

Eastar™ Mn006 product card banner
PRODUCT

EASTAR

EASTAR™ MN006

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

EASTAR™ MN006 by Eastman is comprised of Copolyester Resin. It is commonly used as Molding Resin for a variety of applications.

Eastar™ Mn210 product card banner
PRODUCT

EASTAR

EASTAR™ MN210

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

EASTAR™ MN210 by Eastman is comprised of Copolyester Resin. It is commonly used as Molding Resin for a variety of applications.

Tenite™ Propionate 350A0096914 product card banner
PRODUCT

TENITE

TENITE™ Propionate 350A0096914

Applications: Other Medical Applications

Product Families: Cellulosics

Chemical Family: Cellulose & Cellulosics

Polymer Name: Cellulose Acetate Propionate (CAP)

End Uses: Medical/Healthcare Applications

TENITE™ Propionate 350A0096914 by Eastman is comprised of Cellulose Acetate Propionate. It is commonly used for a variety of applications. . It is available in Pellets form.

Eastar™ Dn003 product card banner
PRODUCT

EASTAR

EASTAR™ DN003

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

EASTAR™ DN003 by Eastman is comprised of Copolyester Resin. It is commonly used as Extrusion Resin and Molding Resin for a variety of applications.

Eastar™ Mn021 product card banner
PRODUCT

EASTAR

EASTAR™ MN021

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

EASTAR™ MN021 by Eastman is comprised of Copolyester Resin. It is commonly used as Molding Resin for a variety of applications.

Eastar™ Mn200 product card banner
PRODUCT

EASTAR

EASTAR™ MN200

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

EASTAR™ MN200 by Eastman is comprised of Copolyester Resin. It is commonly used as Molding Resin for a variety of applications.

Eastalite™ Mp007f product card banner
PRODUCT

EASTALITE

EASTALITE™ MP007F

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

EASTALITE™ MP007F by Eastman is comprised of Copolyester Resin. It is commonly used as Thermoforming Resin for a variety of applications.