Company logo
producer
Eastman
Search:
28 products found on Eastman
Selected filters (1):
FeaturesRadiation Sterilizable
Clear all
With TDS
With SDS

28 products found on Eastman

Tritan™ Mx731 product card banner
PRODUCT

TRITAN

TRITAN™ MX731

Applications: Other Medical Applications, Medical Devices & Assemblies

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Devices

Eastman Tritan™ Copolyester MX731 is an amorphous product with excellent appearance and clarity. Eastman Tritan™ Copolyester MX731 is a high flow medical grade of Eastman Tritan™ that has viscosity reductions of 40-50% relative to Eastman Tritan™ Copolyester MX711. Eastman Tritan™ Copolyester MX731 contains a mold release derived from vegetable based sources. Eastman Tritan™ Copolyester MX731 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Eastman Tritan™ Copolyester MX731 has been formulated for medical devices. Eastman Tritan™ Copolyester MX731 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization.

Eastar™ Mn058 product card banner
PRODUCT

EASTAR

EASTAR™ MN058

Applications: Other Medical Applications, Laboratory & Diagnostics

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Labware

Meets ISO 10993 and/or USP Class VI biocompatibility requirements. Eastar™ Copolyester MN058 is a medical grade base with brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. It has a relatively high flex modulus and yield strength. This product has high flow characteristics. It does not contain a mold release or ultraviolet stabilizer. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Eastar™ Mn210, Natural product card banner
PRODUCT

EASTAR

EASTAR™ MN210, Natural

Applications: Other Medical Applications, Other Medical & Pharma Packaging

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Packaging

Eastar™ Copolyester MN210 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. This product does not contain a mold release.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Durastar™ Mn631 product card banner
PRODUCT

DURASTAR

DURASTAR™ MN631

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polyester (unspecified)

End Uses: Medical/Healthcare Applications

DuraStar™ Polymer MN631 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. MN631 has very good toughness. Easy to process with minimal drying time, it flows readily and fills the most intricate tools.

Eastar™ Dn003, Natural product card banner
PRODUCT

EASTAR

EASTAR™ DN003, Natural

Applications: Other Medical Applications, Other Consumer Goods Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Eyeglasses

Eastar™ Copolyester DN003 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. DN003 contains a mold release.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Tritan™ Mx730 product card banner
PRODUCT

TRITAN

TRITAN™ MX730

Applications: Other Medical Applications, Medical Devices & Assemblies

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Devices

Eastman Tritan™ MX730 copolyester is an amorphous product with excellent appearance and clarity. Tritan MX730 is a high-flow medical grade of Eastman Tritan™ that has viscosity reductions of 40-50% relative to Eastman Tritan™ MX710 copolyester . Eastman Tritan MX730 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability. Tritan MX730 has been formulated for medical devices. Tritan MX730 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after gamma and ETO sterilization.

Eastar™ Mn052 product card banner
PRODUCT

EASTAR

EASTAR™ MN052

Applications: Other Medical Applications, Laboratory & Diagnostics

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Labware

Eastar™ Polyester MN052 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Polyester MN052 does not contain a mold release. It has a relatively high flex modulus and yield strength. This product has high flow characteristics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Eastar™ Mb002 product card banner
PRODUCT

EASTAR

EASTAR™ MB002

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Tubing, Pharmaceutical Packaging, Laminates

Eastar™ copolyester MB002 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It is a resin specifically developed for extrusion blow molding containers in medical applications where aesthetics such as high clarity and gloss, coupled with high toughness and chemical resistance, are desirable. Compared to many commonly used materials, Eastar™ copolyester MB002 runs on most standard processing equipment with broader processing conditions, and its toughness and melt strength enable blow molding of larger containers with greater design flexibility. This product meets the biocompatibility requirements under FDA/ISO 10993 and USP Class 6, Plastics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Tritan™ Mp200 product card banner
PRODUCT

TRITAN

TRITAN™ MP200

Applications: Other Medical & Pharma Packaging, Food Films & Packaging

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical Packaging, Film

Eastman Tritan(TM) MP200 is an amorphous copolyester that combines excellent clarity and toughness with outstanding heat and chemical resistance. Film and sheet manufactured from this new-generation copolyester can be thermoformed with a wide processing window that allows for product designs that reflect intricate detail. Eastman Tritan MP200 copolyester is suitable for use with most forms of sterilization including radiation and ethylene oxide. It is NOT suitable for autoclave/steam sterilization. Eastman Tritan MP200 copolyester has been formulated for use in medical film, sheet, and packaging applications.

Eastalite™ Copolyester Mp007f product card banner
PRODUCT

EASTALITE

EASTALITE™ Copolyester MP007F

Applications: Other Medical Applications, Other Medical & Pharma Packaging

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Pharmaceutical Packaging, Medical/Healthcare Applications, Medical Packaging

Eastalite™ Foamed Copolyester MP007F with nonporous Eastar™ Copolyester 6763 skins is an opaque, amorphous material with a closed foam structure useful for medical packaging. It is normally white/pearlescent in appearance but may also be colored using Eastman resins and concentrates.

Eastar™ Dn004, Natural product card banner
PRODUCT

EASTAR

EASTAR™ DN004, Natural

Applications: Applicators & Accessories, Stationery & Office Supplies, Sports & Recreation

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Furniture, Medical/Healthcare Applications, Eyeglass Frames

Eastar™ Copolyester DN004 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. DN004 contains a mold release.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Eastar™ Mn021 Natural product card banner
PRODUCT

EASTAR

EASTAR™ MN021 Natural

Applications: Other Medical Applications, Laboratory & Diagnostics

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Labware

Eastar™ Copolyester MN021 Natural has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ copolyester MN021 Natural is a thermoplastic condensation copolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. It has a relatively high flex modulus and yield strength. This product does not contain a mold release. It is a thermoplastic condensation copolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. It has been crystallized. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Tritan™ Mx810 product card banner
PRODUCT

TRITAN

TRITAN™ MX810

Applications: Other Devices & Assemblies, Packaging & Assembly Materials, Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Devices, Encapsulant

Eastman Tritan™ MX810 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan MX810 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization.

Tritan™ Tx1801 Natural product card banner
PRODUCT

TRITAN

TRITAN™ TX1801 Natural

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

Eastman Tritan™ TX1801 copolyester is an amorphous copolyester specifically developed for use in blow molding applications. Eastman Tritan™ Copolyester TX1801 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. In addition, this new generation copolyester offers excellent appearance and clarity. Eastman Tritan™ Copolyester TX1801 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations.

Tenite™ Propionate 360A4861307 Clear, Trsp product card banner
PRODUCT

TENITE

TENITE™ Propionate 360A4861307 Clear, Trsp

Applications: Other Medical Applications

Product Families: Cellulosics

Chemical Family: Cellulose & Cellulosics

Polymer Name: Cellulose Acetate Propionate (CAP)

End Uses: Medical/Healthcare Applications

Tenite™ Propionate 360A4861307 has been tested for USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite™ cellulosic plastics are available in natural, clear, selected ambers or smoke transparents and black translucent. Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulosic Acetate Propionate 360-7 has a plasticizer level of 7%.

Tritan™ Mx711 product card banner
PRODUCT

TRITAN

TRITAN™ MX711

Applications: Other Medical Applications, Medical Devices & Assemblies

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Devices

Eastman Tritan™ Copolyester MX711 is an amorphous product with excellent appearance and clarity. Eastman Tritan™ Copolyester MX711 contains a mold release derived from vegetable based sources. Eastman Tritan™ Copolyester MX711 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. Eastman Tritan™ Copolyester MX711 has been formulated for medical devices. Eastman Tritan™ Copolyester MX711 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization.

Durastar™ Mn611 product card banner
PRODUCT

DURASTAR

DURASTAR™ MN611

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polyester (unspecified)

End Uses: Medical/Healthcare Applications

Durastar™ Polymer MN611 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It contains a mold release to improve ejection. It has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. MN611 has very good toughness.

Durastar™ Mn621 product card banner
PRODUCT

DURASTAR

DURASTAR™ MN621

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polyester (unspecified)

End Uses: Medical/Healthcare Applications

DuraStar™ Polymer MN621 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It contains a mold release to improve ejection. It processes easily and requires minimal drying time. It has superior toughness, high clarity and good chemical resistance.

Eastar™ Mn006 Natural product card banner
PRODUCT

EASTAR

EASTAR™ MN006 Natural

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

Eastar™ Copolyester MN006 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Copolyester MN006 Natural is a brilliantly clear polymer having excellent impact strength, chemical resistance, and low shrinkage rates. Eastar™ Copolyester MN006 Natural contains a mold release. This polymer is the toughest of the Eastar™ family of products. Additional outstanding features are chemical resistance and excellent color and property retention following gamma and e-beam sterilization. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Tritan™ Mx811 product card banner
PRODUCT

TRITAN

TRITAN™ MX811

Applications: Other Devices & Assemblies, Packaging & Assembly Materials, Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications, Medical Devices, Encapsulant

Eastman Tritan MX811 is an amorphous copolyester with excellent appearance and clarity. Tritan MX811 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Tritan MX811 has been formulated for medical devices. Tritan MX811 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization.

Eastar™ Mn005 product card banner
PRODUCT

EASTAR

EASTAR™ MN005

Applications: Displays, Cosmetic Packaging, Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Personal Care, Decorative Displays, Cosmetics

Eastar™ Copolyester MN005 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ Copolyester MN005 has excellent appearance and is nearly water-clear. It is easy to process and can fill intricate tools. Its most outstanding features are exceptional clarity, toughness, radiation resistance chemical resistance and excellent color and property retention following gamma and e-beam sterilization. MN005 contains a mold release. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Provista™ Gp Copolymer product card banner
PRODUCT

Provista

Provista™ GP Copolymer

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polyester (unspecified)

Eastman Provista™ GP Copolymer is a clear, amorphous material created for the profile extrusion market. It exhibits clarity, toughness and good melt strength at processing temperatures. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Durastar™ Mn630 product card banner
PRODUCT

DURASTAR

DURASTAR™ MN630

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Polyester (unspecified)

End Uses: Medical/Healthcare Applications

DuraStar™ Copolyester MN630 does not contain a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding feature is its high flow characteristic, with the ability to fill intricate tooling. It is easy to process with minimal drying time and has good toughness and chemical resistance.

Eastar™ Mn211, Natural product card banner
PRODUCT

EASTAR

EASTAR™ MN211, Natural

Applications: Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical/Healthcare Applications

Eastar™ Copolyester MN211 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ copolyesters are brilliantly clear polymers that have excellent impact strength, chemical resistance, dimensional stability, and low shrinkage rates. MN211 contains a mold release.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Tenite™ Propionate 350A0096914 Natural, Trsp product card banner
PRODUCT

TENITE

TENITE™ Propionate 350A0096914 Natural, Trsp

Applications: Other Medical Applications

Product Families: Cellulosics

Chemical Family: Cellulose & Cellulosics

Polymer Name: Cellulose Acetate Propionate (CAP)

End Uses: Medical/Healthcare Applications

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite™ cellulosic plastics are available in natural, clear, selected ambers or smoke transparents and black translucent. Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulose Acetate Propionate 350-14 has a plasticizer level of 14%. It meets FDA requirements for certain food-contact applications when supplied in specific FDA color numbers.

Tritan™ Mx710 product card banner
PRODUCT

TRITAN

TRITAN™ MX710

Applications: Medical Devices & Assemblies, Other Medical Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Medical Devices, Medical/Healthcare Applications

Eastman Tritan™ Copolyester MX710 is an amorphous product with excellent appearance and clarity. Eastman Tritan™ Copolyester MX710 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. Eastman Tritan™ Copolyester MX710 has been formulated for medical devices.

Eastman™ 1223 product card banner
PRODUCT

Eastman

Eastman™ 1223

Applications: Sports & Recreation, Shrink Films, Wallcovering & Decorative Laminates

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Toys, Sporting Goods, Laminates

Eastman™ copolyester 1223 is a clear, amorphous material. Because of its clarity, toughness and good melt strength at processing temperatures, it is useful in a variety of processing techniques including film and sheet extrusion. Eastman™ Copolyester 1223 may be colored using color concentrates, dry colors or liquid colorants.

Eastar™ 6763 product card banner
PRODUCT

EASTAR

EASTAR™ 6763

Applications: Other Rigid Packaging, Sports & Recreation, Shrink Films

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Toys, Thin Walled Packaging, Sporting Goods

Eastar™ copolyester 6763 is a clear, amorphous material. Because of its clarity, toughness and good melt strength at processing temperatures, it is useful in a variety of processing techniques including film and sheet extrusion. Eastar™ Copolyester 6763 may be colored using color concentrates, dry colors or liquid colorants.This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®.The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.This product has been CRADLE TO CRADLE CERTIFIED Silver.The CRADLE TO CRADLE CERTIFIED Mark is a registered certification mark used under license through McDonough Braungart Design Chemistry (MBDC). MBDC is a global sustainability consulting and product certification firm. The CRADLE TO CRADLE® framework moves beyond the traditional goal of reducing the negative impacts of commerce ('eco-efficiency'), to a new paradigm of increasing its positive impacts ('eco-effectiveness'). At its core, Cradle to Cradle design perceives the safe and productive processes of nature's 'biological metabolism' as a model for developing a 'technical metabolism' flow of industrial materials. Product components can be designed for continuous recovery and reutilization as biological and technical nutrients within these metabolisms. For more information about MBDC and to obtain printable certificates for Eastman Copolyesters, visit www.mbdc.com. Choose Eastman Chemical Company under Company Name in C2C Certified products to display a list of our products.