Company logo
producer
Eastman
Search:
26 products found on Eastman
Selected filters (1):
Processing MethodsBlow Molding
Clear all
With TDS
With SDS

26 products found on Eastman

Eastar™ Mb002 product card banner
PRODUCT

EASTAR

EASTAR™ MB002

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Tubing, Pharmaceutical Packaging, Laminates

Eastar™ copolyester MB002 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It is a resin specifically developed for extrusion blow molding containers in medical applications where aesthetics such as high clarity and gloss, coupled with high toughness and chemical resistance, are desirable. Compared to many commonly used materials, Eastar™ copolyester MB002 runs on most standard processing equipment with broader processing conditions, and its toughness and melt strength enable blow molding of larger containers with greater design flexibility. This product meets the biocompatibility requirements under FDA/ISO 10993 and USP Class 6, Plastics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Ecdel™ 9965 product card banner
PRODUCT

ECDEL

ECDEL™ 9965

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Other Thermoplastic Elastomers

Polymer Name: Thermoplastic Elastomer (unspecified)

End Uses: Pharmaceutical Packaging, Medical Packaging, Film

Meets ISO 10993 and/or USP Class VI biocompatibility requirement. Ecdel™ elastomers are medical grade copolyester ethers (COPE) that offer the clarity, toughness, and chemical resistance needed in a variety of flexible packaging including medical and pharmaceutical applications. Ecdel™ elastomer 9965 may be processed on standard injection molding, extrusion blow molding, profile extrusion, extrusion coating, or film extrusion equipment. Ecdel™ elastomers may be extrusion blow molded directly into bags or extruded into film for later fabrication into bags. Ecdel™ elastomers are radiation, electron beam, ethylene oxide, and autoclave sterilization stable. 9965's low inherent viscosity may be helpful for extrusion coating or cast film extrusion applications. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Aspira™ One Polymer product card banner
PRODUCT

ASPIRA

ASPIRA™ One polymer

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

ASPIRA™ One polymer by Eastman is comprised of Copolyester Resin. It is commonly used as Molding Resin for a variety of applications. It is available in Pellets form.

Tritan™ Tx1800 product card banner
PRODUCT

TRITAN

TRITAN™ TX1800

Applications: Other Consumer Goods Applications

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Consumer Applications

Eastman Tritan™ TX 1800 copolyester is an amorphous copolyester specifically developed for use in blow molding and profile extrusion applications. Its most outstanding features are excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. In addition, this new generation copolyester offers excellent appearance and clarity. Eastman Tritan™ TX1800 copolyester may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. This product is certified to NSF/ANSI Standard 51 for Food Equipment Materials.This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Tritan™ Ex401 product card banner
PRODUCT

TRITAN

TRITAN™ EX401

Applications: Other Consumer Goods Applications, Bottles & Jars, Cosmetic Packaging

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Pacifiers, Bottles

Tritan EX401, specifically developed for the Infant Care market, is an amorphous copolyester with excellent appearance and clarity. Tritan EX401 contains a mold release derived from vegetable based sources. Its most outstanding features are clarity, excellent toughness, hydrolytic stability, and heat and chemical resistance. Tritan EX401 meets infant care sterilization requirements via boiling water or microwave steam sterilization. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Tritan's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity, and aggressive cleaning agents. Tritan EX401 can be converted into parts using injection molding, injection stretch blow molding (ISBM), and extrusion blow molding techniques. Tritan EX401 may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Contact Eastman representative for details on global food contact regulatory clearances. Tritan EX401 is included in Eastman Chemical Company’s Customer Notification Procedure which details our policy for customer notification when significant changes are made in Tritan EX401 sold into the infant care market. This procedure provides the infant care industry an added layer of confidence in the consistent quality and performance of Tritan.

Tritan™ Lx500 product card banner
PRODUCT

TRITAN

TRITAN™ LX500

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastman Tritan™ LX500 is an amorphous copolyester specifically developed for use in blow molding applications for the cosmetic, fragrance, and personal care markets. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. In addition, this new generation copolyester offers excellent appearance and clarity.

Tritan™ Wx500 product card banner
PRODUCT

TRITAN

TRITAN™ WX500

Applications: Containers & Tubs, Bottles & Jars, Cosmetic Packaging

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Containers, Bottles

Eastman Tritan™ WX500 copolyester is a resin specifically developed for blow molded bottles. Extremely high melt strength makes the resin an excellent choice when manufacturing large bottles. This new-generation copolyester most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. Tritan WX500 copolyester may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations.This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Tritan™ Lx151hf product card banner
PRODUCT

TRITAN

TRITAN™ LX151HF

Applications: Cosmetic Packaging

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Personal Care, Cosmetic Packaging

Eastman Tritan™ LX151HF is a high flow grade of an amorphous copolyester with excellent appearance and clarity. Eastman Tritan™ LX151HF has viscosity reductions of 40-50% relative to standard grades of Eastman Tritan™. Eastman Tritan™ LX151HF contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. Tritan™ LX151HF was developed for the cosmetic, fragrance, and personal care markets. Tritan™ LX151HF can easily be converted into articles for application in consumer and personal care markets by injection molding, extrusion blow molding, and injection blow molding.

Tritan™ Lx201 product card banner
PRODUCT

TRITAN

TRITAN™ LX201

Applications: Cosmetic Packaging

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Personal Care, Cosmetics, Cosmetic Packaging

Eastman Tritan™ LX201 is an amorphous copolyester with excellent appearance and clarity. Tritan™ LX201 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. Tritan™ LX201 was developed for the cosmetic, fragrance, and personal care markets. Tritan™ LX201 can easily be converted into articles for application in Consumer and Personal Care markets by injection molding, extrusion blow molding, and injection blow molding.

Eastar™ Gn046 product card banner
PRODUCT

EASTAR

EASTAR™ GN046

Applications: Caps & Closures, Bottles & Jars, Cosmetic Packaging

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Caps, Bottles

Eastar™ Copolyester GN046 is a very high melt strength copolyester targeted for extrusion blow molding applications. Blow molding of large parts (up to several pounds) are possible with this material. This product is certified to ANSI/NSF Standard 51. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

Tritan™ Lx101 product card banner
PRODUCT

TRITAN

TRITAN™ LX101

Applications: Cosmetic Packaging

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Cosmetic Packaging

Tritan LX101 is an amorphous copolyester with excellent appearance and clarity. Tritan LX101 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. Tritan LX101 was developed for the cosmetic, fragrance, and personal care markets. Tritan LX101 can easily be converted into articles for application in Consumer and Personal Care markets by injection molding, extrusion blow molding, and injection blow molding.

Eastar™ Eb062 product card banner
PRODUCT

EASTAR

EASTAR™ EB062

Applications: Appliances & Electronics, Medical Devices & Assemblies, Consumer Electronics

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Personal Care, Handles, Food Containers

Eastar™ Copolyester EB062 is a resin specifically developed for extrusion blown bottles where aesthetics such as high clarity and gloss, coupled with design flexibility, drive demand particularly in packaging for cosmetics and personal care. Compared to commonly used materials, Eastar™ copolyester EB062 runs on most standard processing equipment. Extremely high melt strength makes the resin an excellent choice when manufacturing bottles. This product offers improved toughness, melt strength, chemical resistance, excellent color, and clarity in thick-walled applications. Eastar™ Copolyester EB062 is certified to NSF/ANSI Standard 51 for Food Equipment Materials. Eastar EB062 is cleared for various food contact applications (including contact with most alcoholic beverages) by FCN No. 1234 as described in the Food and Drug Administration (FDA) Inventory of Effective Food Contact Substance Notifications and may be used in full compliance with the United States Federal Food and Drug, and Cosmetic Act, provided that it is used within the limitations set forth for FCN 1234. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Tritan™ Lx200 product card banner
PRODUCT

TRITAN

TRITAN™ LX200

Applications: Cosmetic Packaging

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Cosmetic Packaging

Eastman Tritan™ LX200 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. Eastman Tritan™ LX200 was developed for the cosmetic, fragrance, and personal care markets. Tritan™ LX200 can easily be converted into articles for application in Consumer and Personal Care markets by injection molding, extrusion blow molding, and injection blow molding.

Ecdel™ 9966 product card banner
PRODUCT

ECDEL

ECDEL™ 9966

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Other Thermoplastic Elastomers

Polymer Name: Thermoplastic Elastomer (unspecified)

End Uses: Pharmaceutical Packaging, Medical Packaging, Film

Meets ISO 10993 and/or USP Class VI biocompatibility requirement. Ecdel™ elastomers are plasticizer free copolyester elastomers (COPE) that offer clarity, toughness, flexibility, and chemical resistance needed in a variety of flexible packaging including flexible medical and pharmaceutical packaging applications. Ecdel™ elastomers are radiation, electron beam, ethylene oxide, and autoclave sterilization stable. 9966 may be injection molded or extruded. Ecdel™ elastomers may be extrusion blow molded directly into bags or extruded into film for later fabrication into bags. 9966's medium inherent viscosity makes it a good general purpose elastomer. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Ecdel™ 9967 product card banner
PRODUCT

ECDEL

ECDEL™ 9967

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Other Thermoplastic Elastomers

Polymer Name: Thermoplastic Elastomer (unspecified)

End Uses: Pharmaceutical Packaging, Personal Care, Medical/Healthcare Applications

Meets ISO 10993 and/or USP Class VI biocompatibility requirement. Ecdel™ elastomers are plasticizer free copolyester elastomers (COPE) that offer clarity, toughness, flexibility, and chemical resistance for flexible packaging including medical and pharmaceutical applications. Ecdel™ elastomer 9967 may be processed on standard injection molding, extrusion blow molding, profile extrusion, extrusion coating, or film extrusion equipment. Ecdel™ elastomers may be extrusion blow molded directly into bags or extruded into blown or cast film for later fabrication into bags. Ecdel™ elastomers are radiation, electron beam, ethylene oxide, and autoclave sterilization stable. 9967's high inherent viscosity may be helpful where good melt strength is required (blown film or profile extrusion). This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Neostar™ Elastomer Fn007 product card banner
PRODUCT

NEOSTAR

NEOSTAR™ Elastomer FN007

Applications: Other Automotive Applications

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Copolyester Elastomer (COPE)

End Uses: Automotive Applications

Eastman Neostar™ Elastomer FN007 is the third in Eastman’s series of tough, clear, durable, general purpose grade copolyester ethers. Though originally designed for use in the profile and automotive markets, this innovative copolymer has also found use in tubing and packaging applications. Its excellent chemical, heat, and puncture resistance combined with its strength and durability make it a good choice for applications that require flex-crack resistance and a general utility in harsh environments. Eastman Neostar™ Elastomer FN007 can be injection molded, extruded in blown film or tubing, or extrusion blow molded. The target inherent viscosity of this product is 1.23. This product has been CRADLE TO CRADLE CERTIFIEDTM Bronze, with Material Health Certificate, Platinum. The CRADLE TO CRADLE CERTIFIED mark is a registered certification mark used under license through the Cradle to Cradle Products Innovation Institute, a nonprofit organization that administers the publicly available Cradle to Cradle CertifiedTM Product Standard which provides designers and manufacturers with criteria and requirements for continually improving product materials and manufacturing processes. The Cradle to Cradle CertifiedTM Product Standard guides designers and manufacturers through a continual improvement process that looks at a product through five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. A product receives an achievement level in each category—Basic, Bronze, Silver, Gold, or Platinum—with the lowest achievement level representing the product’s overall mark. The Material Health Certificate provides manufacturers with a trusted way to communicate their efforts to identify and replace chemicals of concern in their products. For more information about Cradle to Cradle certification and to obtain printable certificates for Eastman copolyesters, visit www.c2ccertified.org. Search for Eastman Chemical Company in Cradle to Cradle Certified Products Registry.

Drystar™ 0601 product card banner
PRODUCT

DRYSTAR

DRYSTAR™ 0601

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastman is pleased to announce the launch of DRYSTAR* copolyesters. This new product-line is designed to meet the needs of converters seeking value-added solutions to their drying requirements of copolyesters. Eastman’s copolyesters are highly valued for their excellent balance of properties such as superior aesthetics, impact strength, and chemical resistance. These properties can be optimally realized when the resins are properly dehydrated in accordance to recommended drying conditions and equipment. Recognizing this value, Eastman conceived Drystar™ copolyesters to allow converters with limited access to desiccant dryers to achieve these optimizations. In addition, some converters with desiccant dryers may still find Drystar™ copolyesters value-adding to attain production flexibility and cost saving by removing the drying process prior to injection molding, profile extruding, or extrusion blow molding copolyesters. The initial launch comprises of the commercialization of four grades of Drystar™ copolyesters and Eastman has on-going program to extend this strategic product-line in the future. *DRYSTAR is only available in the Asia Pacific Region.

Drystar™ 0325 product card banner
PRODUCT

DRYSTAR

DRYSTAR™ 0325

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastman is pleased to announce the launch of DRYSTAR* copolyesters. This new product-line is designed to meet the needs of converters seeking value-added solutions to their drying requirements of copolyesters. Eastman’s copolyesters are highly valued for their excellent balance of properties such as superior aesthetics, impact strength, and chemical resistance. These properties can be optimally realized when the resins are properly dehydrated in accordance to recommended drying conditions and equipment. Recognizing this value, Eastman conceived Drystar™ copolyesters to allow converters with limited access to desiccant dryers to achieve these optimizations. In addition, some converters with desiccant dryers may still find Drystar™ copolyesters value-adding to attain production flexibility and cost saving by removing the drying process prior to injection molding, profile extruding, or extrusion blow molding copolyesters. The initial launch comprises of the commercialization of four grades of Drystar™ copolyesters and Eastman has on-going program to extend this strategic product-line in the future. *DRYSTAR is only available in the Asia Pacific Region.

Drystar™ 0603 product card banner
PRODUCT

DRYSTAR

DRYSTAR™ 0603

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastman is pleased to announce the launch of DRYSTAR* copolyesters. This new product-line is designed to meet the needs of converters seeking value-added solutions to their drying requirements of copolyesters. Eastman’s copolyesters are highly valued for their excellent balance of properties such as superior aesthetics, impact strength, and chemical resistance. These properties can be optimally realized when the resins are properly dehydrated in accordance to recommended drying conditions and equipment. Recognizing this value, Eastman conceived Drystar™ copolyesters to allow converters with limited access to desiccant dryers to achieve these optimizations. In addition, some converters with desiccant dryers may still find Drystar™ copolyesters value-adding to attain production flexibility and cost saving by removing the drying process prior to injection molding, profile extruding, or extrusion blow molding copolyesters. The initial launch comprises of the commercialization of four grades of Drystar™ copolyesters and Eastman has on-going program to extend this strategic product-line in the future. *DRYSTAR is only available in the Asia Pacific Region.

Drystar™ 0827 product card banner
PRODUCT

DRYSTAR

DRYSTAR™ 0827

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastman is pleased to announce the launch of DRYSTAR* copolyesters. This new product-line is designed to meet the needs of converters seeking value-added solutions to their drying requirements of copolyesters. Eastman’s copolyesters are highly valued for their excellent balance of properties such as superior aesthetics, impact strength, and chemical resistance. These properties can be optimally realized when the resins are properly dehydrated in accordance to recommended drying conditions and equipment. Recognizing this value, Eastman conceived Drystar™ copolyesters to allow converters with limited access to desiccant dryers to achieve these optimizations. In addition, some converters with desiccant dryers may still find Drystar™ copolyesters value-adding to attain production flexibility and cost saving by removing the drying process prior to injection molding, profile extruding, or extrusion blow molding copolyesters. The initial launch comprises of the commercialization of four grades of Drystar™ copolyesters and Eastman has on-going program to extend this strategic product-line in the future. *DRYSTAR is only available in the Asia Pacific Region.

Drystar™ 0113 product card banner
PRODUCT

DRYSTAR

DRYSTAR™ 0113

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

Eastman is pleased to announce the launch of DRYSTAR* copolyesters. This new product-line is designed to meet the needs of converters seeking value-added solutions to their drying requirements of copolyesters. Eastman?s copolyesters are highly valued for their excellent balance of properties such as superior aesthetics, impact strength, and chemical resistance. These properties can be optimally realized when the resins are properly dehydrated in accordance to recommended drying conditions and equipment.Recognizing this value, Eastman conceived Drystar™ copolyesters to allow converters with limited access to desiccant dryers to achieve these optimizations. In addition, some converters with desiccant dryers may still find Drystar™ copolyesters value-adding to attain production flexibility and cost saving by removing the drying process prior to injection molding, profile extruding, or extrusion blow molding copolyesters. The initial launch comprises of the commercialization of four grades of Drystar™ copolyesters and Eastman has on-going program to extend this strategic product-line in the future.*DRYSTAR is only available in the Asia Pacific Region.

Tritan™ Lx100 product card banner
PRODUCT

TRITAN

TRITAN™ LX100

Applications: Sports & Recreation, Cosmetic Packaging

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Toys, Personal Care, Cosmetic Packaging

Eastman Tritan™ LX100 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. Eastman Tritan™ LX100 was developed for the cosmetic, fragrance, and personal care markets. Tritan™ LX100 can easily be converted into articles for application in consumer and personal care markets by injection molding, extrusion blow molding, and injection blow molding.

Aspira™ Eb062 product card banner
PRODUCT

ASPIRA

ASPIRA™ EB062

Applications: Bottles & Jars, Cosmetic Packaging, Bottles & Vials

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Food Containers, Bottles, Food Packaging

Eastman Aspira™ copolyester EB062 is a resin specifically developed for extrusion blown bottles where aesthetics such as high clarity and gloss, coupled with design flexibility, drive demand. Compared to commonly used materials, Eastman Aspira™ copolyester EB062 runs on most standard processing equipment. Extremely high melt strength makes the resin an excellent choice when manufacturing large bottles.Eastman Aspira™ One is cleared for various food contact applications (including contact with most alcoholic beverages) by FCN No. 1234 as described in the Food and Drug Administration (FDA) Inventory of Effective Food Contact Substance Notifications and may be used in full compliance with the United States Federal Food and Drug, and Cosmetic Act, provided that it is used within the limitations set forth for FCN 1234.This product has been CRADLE TO CRADLE CERTIFIED Silver.The CRADLE TO CRADLE CERTIFIED Mark is a registered certification mark used under license through McDonough Braungart Design Chemistry (MBDC). MBDC is a global sustainability consulting and product certification firm. The CRADLE TO CRADLE® framework moves beyond the traditional goal of reducing the negative impacts of commerce ('eco-efficiency'), to a new paradigm of increasing its positive impacts ('eco-effectiveness'). At its core, Cradle to Cradle design perceives the safe and productive processes of nature's 'biological metabolism' as a model for developing a 'technical metabolism' flow of industrial materials. Product components can be designed for continuous recovery and reutilization as biological and technical nutrients within these metabolisms. For more information about MBDC and to obtain printable certificates for Eastman Copolyesters, visit www.mbdc.com. Choose Eastman Chemical Company under Company Name in C2C Certified products to display a list of our products.

Neostar™ Fn007 product card banner
PRODUCT

NEOSTAR

NEOSTAR™ FN007

Applications: Cooling & Climate, Appliances & Electronics, Fuel Systems

Product Families: Thermoplastic Polyester Elastomers (TPE-E)

Chemical Family: Polyesters

Polymer Name: Copolyester Elastomer (COPE)

End Uses: Cast Films, Film, Automotive Applications

Eastman Neostar™ Elastomer FN007 is the third in Eastman's series of tough, clear, durable, general purpose grade copolyester ethers. Though originally designed for use in the profile and automotive markets, this innovative copolymer has also found use in tubing and packaging applications. Its excellent chemical, heat, and puncture resistance combined with its strength and durability make it a good choice for applications that require flex-crack resistance and a general utility in harsh environments. Eastman Neostar™ Elastomer FN007 can be injection molded, extruded in blown film or tubing, or extrusion blow molded. The target inherent viscosity of this product is 1.23.This product has been CRADLE TO CRADLE CERTIFIED Silver.The CRADLE TO CRADLE CERTIFIED Mark is a registered certification mark used under license through McDonough Braungart Design Chemistry (MBDC). MBDC is a global sustainability consulting and product certification firm. The CRADLE TO CRADLE® framework moves beyond the traditional goal of reducing the negative impacts of commerce ('eco-efficiency'), to a new paradigm of increasing its positive impacts ('eco-effectiveness'). At its core, Cradle to Cradle design perceives the safe and productive processes of nature's 'biological metabolism' as a model for developing a 'technical metabolism' flow of industrial materials. Product components can be designed for continuous recovery and reutilization as biological and technical nutrients within these metabolisms. For more information about MBDC and to obtain printable certificates for Eastman Copolyesters, visit www.mbdc.com. Choose Eastman Chemical Company under Company Name in C2C Certified products to display a list of our products.

Tritan™ Lx150hf product card banner
PRODUCT

TRITAN

TRITAN™ LX150HF

Applications: Cosmetic Packaging

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

End Uses: Cosmetic Packaging

Eastman Tritan™ LX150HF is a high flow grade of an amorphous copolyester with excellent appearance and clarity. Eastman Tritan™ LX150HF has viscosity reductions of 40-50% relative to standard grades of Eastman Tritan™. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. Tritan™ LX150HF was developed for the cosmetic, fragrance, and personal care markets. Tritan™ LX150HF can easily be converted into articles for application in consumer and personal care markets by injection molding, extrusion blow molding, and injection blow molding.

Tritan™ Tx1801 product card banner
PRODUCT

TRITAN

TRITAN™ TX1801

Product Families: Polyesters & Copolyesters

Chemical Family: Polyesters

Polymer Name: Copolyester Resin

TRITAN™ TX1801 by Eastman is comprised of Copolyester Resin. It is commonly used as Molding Resin for a variety of applications.