Products

PEL-SIL™ CL320 is a low HLB silicone surfactant and a leveling & gloss agent. It is used as an additive for polyurethane coating resin systems. PEL-SIL™ 9107 will react into PU coatings to give silicone properties to the surface because it is hydroxyl functional. It is useful for imparting silicone characteristics into synthetic leather top coat formulations.

PEL-SIL™ CL400 is a linear, 100% active, PEG-10 siloxane polyether. It is a slip control agent for both waterborne, solvent borne UV/EB coatings and inks. PEL-SIL™ CL400 is also a flow and leveling agent and defoamer. It may also be incorporated into polymer systems through its two primary hydroxyls in polyurethane systems.

PEL-SIL™ CL340 is a nonreactive, acetate capped, silicone glycol copolymer surfactant supplied at 100 percent active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. Additionally, it provides mar resistance for coatings applications such as glossy printed materials. PEL-SIL™ CL340 is compatible with acrylic, epoxy, nitrocellulose, phenolic, polyester & polyurethane systems. With a low order of toxicity, this product acts as an anti-stick agent in printing ink applications. It is particularly useful for facilitating the slip of magazine covers over one another during printing and distribution. It is also used as a solubility aid to compatibilize blowing agents with isocyanates in the production of polyurethane foams. PEL-SIL™ CL340 is stable in neutral or mildly acidic or alkaline aqueous solutions. It Imparts anti-blocking and improves mar resistance of PU coatings. PEL-SIL™ CL340 is an effective leveling agent for synthetic leather top coatings.

PEL-SIL™ CL360 is a organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. It has pendant molecular structure. PEL-SIL™ CL360 is an excellent flow and leveling agent for solvent-based coatings and inks. It can also be used as defoamer or anti-foaming agent for waterborne coatings systems. It can be used at low dosage levels. For polyurethane foam coatings, PEL-SIL™ CL360 acts a surfactant and foam cell stabilizer. It is not compatible on the isocyanate side and must be added with the polyol. It exhibits excellent compatibility with most polyol premixes.

PEL-CAT™ 9666 Most delayed action trimerization catalyst, suitable for CASE Applications. When used as a co-catalyst, improves wet out and flow without significantly extending overall cure time.

PEL-SIL™ CL380 is a linear, 100% active, PEG-10 siloxane polyether. It is an excellent flow and leveling agent for both waterborne and solvent borne coatings. It also provides slip and mar resistance as well as anti-blocking property. For UV/EB cure coatings, PEL-SIL™ CL380 can reduces coefficient of friction reduction without generating foams or lowering gloss. It may also be incorporated into polymer systems by virtue of its two primary hydroxyls in polyurethane systems.

PEL-SIL™ CW300 a low molecular weight, nonionic silicone-based wetting additive that can reduce the surface tension of aqueous solutions significantly lower than conventional nonionic surfactants can. It is stable at neutral pH and compatible with other anionic surfactants and nonionic surfactants. Even at concentrations as low as 0.1 percent, PEL-SIL™ CW300 wetting additive will reduce surface tension below 22 dynes/cm. Therefore, it produces very rapid wetting and spreading on hard-to-wet surfaces. It shows an excellent and consistent performance over a wide range of substrates in various coating formulations. Its applications are found in plastic coatings, wood coatings, radiation curing coatings, automotive coatings, and printing inks, etc. PEL-SIL™ CW300 can also be used as an ingredient in pesticide products, or as a tank-mix adjuvant for foliar applied chemicals. It allows complete coverage with herbicides, insecticides, fungicides and other agricultural chemicals. PEL-SIL™ CW300 meets the requirements of US EPA regulation 40 CFR 180.910 regarding “tolerances and exemption from tolerances for pesticide chemicals in or on raw agricultural commodities.” It is approved for both food and nonfood use.

PEL-SIL™ CL290 is a organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL™ CE 390 has recoatability and low tendency to foam. It is good compatibility with many resin systems. PEL-SIL™ CL290 is an excellent silicone-based additive for improving slip and mar resistance and reducing friction coefficient for solvent-borne, water-borne, and UV/EB cured coating systems. It can be used for coatings in industrial and auto, wood, and overprint vanishes and inks.

PEL-SIL™ CD710 is a hydrophobic polyether modified organosiloxane. PEL-SIL™ CD710 minimizes foam stability and is an excellent defoamer for waterborne and solvent-based coatings and inks, and textile fiber processing applications. PEL-SIL™ CD710 is also recommended for use as a wetting agent, dispersant, and secondary emulsifier.

PEL-PHOS™ CD270 is an aqueous solution of the sodium salt of a medium HLB, aromatic, phosphate ester. PEL-PHOS™ CD270 is a useful pigment dispersion agent for the manufacture of paints. It is also a detergent, foamer, corrosion inhibitor, emulsifier for detergent concentrates & metalworking fluids, FDA, EPA compliance.

PEL-EST™ CF190 is propoxylated castor oil based non-silicone defoamer. It remains the fluidity of the original oil and is useful in the formation of organic defoamers. PEL-EST™ CF190 is water-dispersable. It is an excellent choice as a natural and renewable organic defoamer.

PEL-HIB CC220 corrosion inhibitor is an amine borate ester suitable for use with aluminum and steel substrates. Originally introduced as an alternative to nitrites, it affords the same level of protection to ferrous materials. It provides excellent rust inhibition and aids lubrication. PEL-HIB CC220 is very water soluble. In addition to its applications in metalworking fluids and coolants, cooling water and boiler operations, oil well and refinery operations, fuels, lubricants and greases, PEL-HIB CC220 also find its uses in inorganic coatings, organic coatings, and printing inks.

PEL-PAG CF240 is a water-soluble, non-silicone defoamer. It is butanol ethoxylated and propoxylated. PEL-PAG-WS CF240 is used as a defoamer in waterborne paint and coatings. It can also be used as freeze-thaw stabilizer for latexes emulsions.

PEL-SIL™ CL350 is a polysiloxane with EO/PO polyether side chains. It can be used as a low foaming flow and leveling agent and wetting agent in waterborne and solvent borne coatings and inks. PEL-SIL™ CL350 is also reactive in 2K polyurethane systems as a resin and surface modifier. Other uses for PEL-SIL™ CL350 include surface tension reduction in silicone emulsions and improvement of drainage in pulp brown stock washing.

PEL-SIL™ CL310 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and polypropylene oxide (PO) side chains. PEL-SIL™ CL310 minimizes foam stability and is an excellent defoamer for waterborne industrial or decorative coatings. PEL-SIL™ CL310 is compatible with solvent-borne coatings and inks. It provides good low and leveling performance, mar resistance, anti-blocking and releasing properties.

PEL-SIL™ CX740 is an epoxy functionalized siloxane polyether. With its silicone and organic combination and dual reactive hydroxyl and epoxy functionality, PEL-SIL™ CX740 offers the unique capability to modify epoxy and polyurethane systems. It can impart surface and bulk properties, such as gloss, slip, hydrophobicity, flexability and durability. Due to its low viscosity, PEL-SIL™ CX740 enhances the process for better mixing and flow for compounds and composites.

PEL-STAT CS410 is a very efficient internal antistatic agent for engineering thermoplastics. It is thermally stable to at least 260° C and provides Mil Spec performance at low concentrations. Most thermoplastics used in the electronics industry are non-conductive and subject to static charge buildup during manufacturing and use. Small electrical discharges, as low as 50 volts, can damage electronic components, so it is desirable to make these thermoplastics antistatic through use of conductive fillers or chemical additives. Typical fillers such as carbon black, metallic particles and oxides are effective but they require high loadings of about 25%, they degrade the physical properties of the resin and they are expensive to use. Chemical antistatic additives have been used successfully in polyolefins and are cost effective. In engineering thermoplastics, compounding and molding temperatures are too high for these additives to be used without thermal degradation. They typically degrade between 100 – 150° C. PEL-STAT CS410 performs in high temperature applications significantly greater than 150° C. It has much higher thermal stability than standard antistatic agents and can provide long term, internal static protection. PEL-STAT CS410 can be incorporated into HIPS, Noryl, and Nylon 6 with minimal color change. The typical use level is 5% by weight.

PEL-QUAT CS280 is a quaternary salt. It is a very concentrated liquid consisting primarily of isostearyl ethylimidazolinium ethosulfate. PEL-QUAT CS280 is compatible with waterborne coating systems stabilized by anionic surfacants. PEL-QUAT CS280 is a multi-functional additive. It can be used as an effective anti-static agent, wetting agent for coatings and adhesives, and as a quat emulsifier for drilling fluid.

PEL-PHOS™ CD260 is a dispersant, lubricant, anti-wear additive, corrosion inhibitor, wetting agent, emulsifier, detergent. It is both biodegradable and a non-ecotoxic surfactant. PEL-PHOS™ CD260 can also be used as co-emulsifier for emulsion polymerization.

PEL-SIL™ CL330 is a silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) side chains. It is stable in neutral or mildly acid or alkaline aqueous solutions. The EO component gives PEL-SIL™ CL330 coatings additive its compatibility with water-borne systems. PEL-SIL™ CL330 has excellent wetting and recoatability. It can be used at low dosage levels. PEL-SIL™ CL330 can be recommended for use as a leveling and wetting agent in water-borne paints and coatings in automotive, transportation, construction and aerospace industries. It can also be used in solvent-based and high solid/UV curable coatings as leveling agent. For polyurethane foam coatings, PEL-SIL™ CL330 acts a surfactant and foam cell stabilizer. It is not compatible on the isocyanate side and must be added with the polyol. It exhibits excellent compatibility with most polyol premixes.

PEL-SIL™ CL370 is an amino-functional siloxane with pendant propyldiamine groups. The specialty amino polysiloxane can be used in coatings and adhesives for improving adhesion to various substrates. PEL-SIL™ CL370 is a reactive amine-containing siloxane additive as resin modifier for epoxy resin and polyurethane systems to impart flexibility and strength.

PEL-PHOS™ CE250 is a phosphate ester of ethoxylated isotridecyl alcohol. It is useful as an emulsifier for emulsion polymerization. It can also be used as co-dispersant and stabilizer for water-based coatings and paints.

PEL-CAT™ CA100 is an efficient tertiary amine accelerator and curing agent for epoxy resin systems. It is a technical preparation of Tris-(Dimethylaminomethyl) Phenol, a Mannich base. This product functions as a Lewis base containing unshared electrons that facilitate the opening of the oxirane ring of epoxides. This compound shows marked acceleration because of the presence of the phenolic hydroxyl group. It is an activator for curing agents such as polyamides, amidoamines and amine adducts. PEL-CAT CA100 finds use in many applications including adhesives, casting and flooring. The low volatility of this product minimizes odors.

PEL-SIL™ CL390 is a specialty quaternary organosilicone. The dialkyl-quat polysiloxane is substantive to fibers. It provides anti-stat, lubricity and softness in textile coating applications. It is non-yellowing and water repellent. PEL-SIL™ can be used as additive to impart antimicrobial activity for polysiloxane coatings in medical device and marine coatings.