Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
category
Elastomers
Products
Ele Corporation
All Ele Corporation
Search products
Elastomers
Product Families
Elastomer Additives
Applications
Functions
All Filters
1 Products found on Ele Corporation in
Elastomers
Most Viewed
SDS
With SDS
TDS
With TDS
PEL-STAT CS410
Functions:
Anti-Static Agent
Chemical Family:
Quaternary Ammonium Compounds
Compatible Polymers & Resins:
Polyphenylene Ether (PPE), Polypropylenes (PP), Polyethylenes (PE), Polyamide 6 (PA 6), High-Impact Polystyrene (HIPS)
Features:
Anti-Static, High Temperature Strength, Good Thermal Stability
PEL-STAT CS410 is a very efficient internal antistatic agent for engineering thermoplastics. It is thermally stable to at least 260° C and provides Mil Spec performance at low concentrations. Most thermoplastics used in the electronics industry are non-conductive and subject to static charge buildup during manufacturing and use. Small electrical discharges, as low as 50 volts, can damage electronic components, so it is desirable to make these thermoplastics antistatic through use of conductive fillers or chemical additives. Typical fillers such as carbon black, metallic particles and oxides are effective but they require high loadings of about 25%, they degrade the physical properties of the resin and they are expensive to use. Chemical antistatic additives have been used successfully in polyolefins and are cost effective. In engineering thermoplastics, compounding and molding temperatures are too high for these additives to be used without thermal degradation. They typically degrade between 100 – 150° C. PEL-STAT CS410 performs in high temperature applications significantly greater than 150° C. It has much higher thermal stability than standard antistatic agents and can provide long term, internal static protection. PEL-STAT CS410 can be incorporated into HIPS, Noryl, and Nylon 6 with minimal color change. The typical use level is 5% by weight.