Elix™ ABS H801

1 of 64 products in this brand
High heat resistance, PC-modified, low emission, increased flow. Typical Applications: Radiator grille, Rear light housing, Tailgate cover, Door components, Instrument panel parts.

Polymer NameAcrylonitrile Butadiene Styrene (ABS)

Processing MethodsInjection Molding

Melt Flow Index6.0 - 6.0 g/10 min

Knowde Enhanced TDS

Identification & Functionality

Plastics & Elastomers Functions
Technologies

Features & Benefits

Applications & Uses

Plastics & Elastomers Processing Methods

Properties

Flame Rating
Physical Form
Flame Rating
UL 94 HB
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Modulus (23°C/50% Relative Humidity, 5 mm/min)348000psi ASTM D 638
Tensile Modulus (23°C/50% Relative Humidity, 1 mm/min)2400MPa ISO 527-1,2
Yield Stress (23°C/50% Relative Humidity, 5 mm/min)46MPa ASTM D 638
Yield Stress (23°C/50% Relative Humidity, 50 mm/min)49 MPa ISO 527-1,2
Yield Strain (23°C/50% Relative Humidity, 50 mm/min) 3.0% ISO 527-1, -2
Tensile Strain at Break (23°C/50% Relative Humidity, 5 mm/min)min. 15%ASTM D 638
Tensile Strain at Break (23°C/50% Relative Humidity, 50 mm/min)min. 15%ISO 527-1,2
Flexural Strength (23°C/50% Relative Humidity, 2 mm/min)77MPa ISO 178
Flexural Modulus (23°C/50% Relative Humidity, 1.3 mm/min)334000psi ASTM D 790
Flexural Modulus (23°C/50% Relative Humidity, 2 mm/min)2300MPaISO 178
Charpy Notched Impact Strength (23°C (73°F), 50% Relative Humidity)30kJ/m2 ISO 179-1eA
Charpy Notched Impact Strength (-30°C (-22°F), 50% Relative Humidity)12kJ/m2 ISO 179-1eA
Charpy Impact Strength (23°C (73°F), 50% Relative Humidity)220kJ/m2 ISO 179-1eU
Charpy Impact Strength (-30°C (-22°F), 50% Relative Humidity)160kJ/m2 ISO 179-1eU
Izod Notched Impact Strength (-22°F (-30°C), 50% Relative Humidity, 3.2mm, 1/8”)195J/m ASTM D 256
Izod Notched Impact Strength (73°F (23°C), 50% Relative Humidity, 3.2mm, 1/8”)405J/m ASTM D 256
Izod Notched Impact Strength (73°F (23°C), 50% Relative Humidity, 6.4mm,1/4”)280J/m ASTM D 256
Izod Notched Impact Strength (23°C (73°F), 50% Relative Humidity)30kJ/m2 ISO 180-1A
Izod Notched Impact Strength (-30°C (-22°F), 50% Relative Humidity)12kJ/m2 ISO 180-1A
Ball Indentation Hardness (23°C/50% Relative Humidity)105N/mm2 ISO 2039-1
Physical Properties
ValueUnitsTest Method / Conditions
Melt Flow Rate - MFR (230°C, 3.8Kg) 6g/10minASTM D1238
Melt Volume Flow Rate - MVFR (220°C, 10Kg)9cm3/10min ISO 1133
Molding Shrinkage - Normal (60X60X2 mm)0.5-0.7% ISO 294-4
Molding Shrinkage - Parallel (60X60X2 mm)0.5-0.7% ISO 294-4
Density (25°C)1.07g/cm3ISO 1183-1
Thermal Properties
ValueUnitsTest Method / Conditions
Coefficient Of Linear Thermal Expansion - Parallel (23 to 55°C)0.810-4/K ISO 11359 -1,2
Deflection Temperature Under Load (0.45 Mpa)106°C ISO 75-1,2
Deflection Temperature Under Load (1.80 Mpa)99°C ISO 75-1,2
Vicat Softening Temperature (50N, 50°C/h)221ºF ASTM D 1525
Vicat Softening Temperature (B50, 50°C/h)105°C ISO 306
Electrical Properties
ValueUnitsTest Method / Conditions
Relative Permittivity (23°C/50 % Relative Humidity, 1 MHz) 3.0IEC 60250
Relative Permittivity (23°C/50 % Relative Humidity, 100 Hz) 3.1IEC 60250
Dissipation Factor (23°C/50 % Relative Humidity, 100 Hz)50 10-4IEC 60250
Volume Resistivity (23°C/50 % Relative Humidity) 1E14Ohm·mIEC 60093
Surface Resistivity (23°C/50 % Relative Humidity) 1E16 OhmIEC 60093
Comparative Tracking Index - CTI (23°C/50 % Relative Humidity, Solution A) 600 RatingIEC 60112
Electric Strength (23°C/50 % Relative Humidity, 1 mm) 38 kV/mmIEC 60243-1
Flammability
ValueUnitsTest Method / Conditions
Burning Rate (US-FMVSS, 200X105X2mm)45mm/min ISO 3795
Burning Behavior (1.6 mm)HB Class UL 94
Burning Behavior (1.6 mm)HBClassUL 94
Glow Wire Test - GWFI (2.0 mm)700°C IEC 60695-2-12
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Mold Temperature70°CISO 294
Injection Velocity240mm/sISO 294
Melt Temperature240°CISO 294

Regulatory & Compliance

Certifications & Compliance

Packaging & Availability

Regional Availability
  • Asia Pacific
  • Europe
  • Latin America
  • North America