Products

EPOXIBOND™ EB-119SP is unfilled, low viscosity, heat curing, high temperature resistant epoxy adhesive. It maintains high lap shear strength up to 210°C and has excellent thermal and chemical resistance. It can be used for bonding, coating, and sealing applications where a thin film with high insulating resistance is required, particularly at elevated temperatures. It is recommended for bonding metals, glass, and ceramic substrates. It has long pot-life and has an amber color change upon cure.

FLASHBOND™ UV-3607HTis a 1-component, UV/Thermal cure adhesive & sealant. This material can cure under moderate intensity UV light as well as elevated temperatures for shadowed areas. Its low viscosity is ideal for coating, capillary action, and doming applications. Unlike traditional dual cure epoxy systems which need light + heat, UV-3607HT can cure either with UV/LED light or with heat.

EPOXIBOND™ EB-135 is a clear epoxy adhesive designed for electronic, optical, medical, and general applications and for casting of small electrical components. This epoxy system has 2 to 1 mixing ratio by volume & cure fast at moderate temperature. The cured adhesive gives high impact and bond strength. It can be used for bonding glass, metals, woods and some plastics

EPOXIBOND™ EB-107LY is a two-part, low viscosity, clear epoxy adhesive and encapsulating material. EB-107LY is a low yellowing version of EB-107LP-2. It is recommended for bonding and encapsulating where reduced yellowing is preferred. It is recommended for joining transparent materials, such as glass, and where a thin bond line is desired. EB-107LY can be used for bonding most metals, ceramics, and some plastics.

EPOXIBOND™ EB-119M is a two component, low viscosity, heat cure epoxy designed for high temperature applications. It is especially well suited to fiber optic terminating, where optical fibers are "pot and polished" into connectors or ferrules.

EPOXIBOND™ EB-135LP is a clear epoxy adhesive designed for electronic, optical, medical, and general applications and for casting of small electrical components. This epoxy system has 2 to 1 mixing ratio by volume & cure fast at moderate temperature. The cured adhesive gives high impact and bond strength. It can be used for bonding glass, metals, woods and some plastics.

SETWORX™ UV-35G is an epoxy adhesive and encapsulating compound designed for electronic, optical, medical, and general industrial applications Once mixed, UV-35G will polymerize and gel instantaneously upon exposure to UV light reducing fixture time to seconds. Once gelled, UV-35G will continue to cure at room temperature or at elevated temperature until fully cured. This epoxy system has 2 to 1 mixing ratio by volume and is available in easy to us dual cartridge systems.

EPOXIBOND™ EB-153 is unfilled, low viscosity, heat curing, high temperature resistant epoxy adhesive. It maintains high lap shear strength up to 210°C and has excellent thermal and chemical resistance. It can be used for bonding, coating, and sealing applications where a thin film with high insulating resistance is required, particularly at elevated temperatures. It is recommended for bonding metals, glass, and ceramic substrates. It has long pot-life and has an amber color change upon cure.