Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- KEY FEATURES
• Excellent toughness
• High impact resistance
• Optimized for high flow and ease of printing
Applications & Uses
- Plastics & Elastomers End Uses
- APPLICATIONS INCLUDE
• Handheld fixtures
• Orthotics and prosthetics
• Jigs and fixtures that need increased toughness
• Industrial grade parts
Properties
- Physical Form
- Material Specific Properties
Value | Units | Test Method / Conditions | |
HDT (0.45 MPa) | 178 | ˚C | ASTM D648 |
Melting Point | 192 | ˚C | ASTM D3418 |
Technical Details & Test Data
- MECHANICAL PROPERTIES
Metric Test Method Print Orientation XY 45/45 YX ZX Ultimate Tensile Strength, MPa ISO 527-2 55.9 (0.3) 29.1 (0.5) 21.5 (0.4) 19.3 (0.9) Tensile Modulus, GPa ISO 527-2 2.16 (0.15) 0.95 (0.07) 0.61 (0.06) 0.48 (0.02) Strain at Break, % ISO 527-2 18 (1) 16 (1) 14 (2) 22 (1) Flexural Strength, MPa ISO 178 72.8 (1.6) 38.4 (0.3) 23.1 (1.0) 22.3 (0.8) Flexural Modulus, GPa ISO 178 2.39 (0.05) 1.00 (0.03) 0.54 (0.02) 0.56 (0.01) Notched Izod Impact Strength, kJ/m2 ISO 180/A 48 (2) 38 (3) 19 (2) 9.7 (1.3)
Storage & Handling
- MATERIAL HANDLING AND DRYING
Essentium PA-CF is an extremely hygroscopic thermoplastic and will absorb moisture from humid air. Keep the material in the vacuum sealed packaging until you are ready to print with it. PA-CF filament should always be fed to the printer in a dry container and stored in a dry cabinet. If the material does absorb more than 500ppm moisture, it should be dried in a low dew point (< -40˚C) oven or vacuum oven at 100 – 120˚C for 4 – 8 hours.
RECOMMENDED HSE PRINT SETTINGS
0.4mm Hozzle
Extrusion Width, mm 0.35 – 0.5 Layer Height, mm 0.15 –0.25 Print Speed, mm/s 50 – 400 Infill, % 15 – 75 Hozzle Temperature, ˚C 240 – 400 Bed Temperature, ˚C 90 – 100 IR Temperature, ˚C 20 – 40 Fan Speed, % 0 – 40 0.8mm Hozzle
Extrusion Width, mm 0.7 – 0.9 Layer Height, mm 0.3 –0.35 Print Speed, mm/s 40 – 160 Infill, % 15 – 75 Hozzle Temperature, ˚C 230 – 400 Bed Temperature, ˚C 90 – 100 IR Temperature, ˚C 20 – 40 Fan Speed, % 0 – 40 RECOMMENDED FDM PRINT SETTINGS
Nozzle Temperature, ºC 265 – 300 Bed Temperature, ºC 85 – 100 Print Speed, mm/s 30 – 60 First Layer Speed, mm/s 15 – 30 Fan Speed, % 0 – 50 Bed Material G-10/FR4 or Glass Bed Adhesion Method Magigoo® PA or PVA glue Infill Density, % <75