Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features & Benefits
- Excellent thermal stability.
- Very good chemical resistance.
- Very good anti-seizing/anti-galling properties.
- Ideal for higher load carrying applications.
Applications & Uses
- Applications
- Application Method
- Cure Method
- Markets
- Aerospace/Defense
- Mechanical Components
- Industrial Machinery & Equipment
- Fasteners
- Typical Applications
- Virtually all fasteners.
- Threaded connectors and disconnects.
- Engine Fasteners.
- Specialty nuts and washers.
- Suggested Pretreatment
Grit Blast
- Suggested Application Method
Dip Spin / Spray
- Dilution/Cleanup Solvent
Ready to Apply, Clean up with Water.
- Cure Cycle
2 hours at 175°F then 2 hours at 400°F.
Properties
- Physical Properties
- Typical Properties
- Chemical Resistance
| Value | Units | Test Method / Conditions | |
| Binder | Silicate | — | — |
| Carrier | Water Borne | — | — |
| Appearance | Matte Gray Finish | — | — |
| Density | 11.5 - 12.1 | Ib/gal | — |
| Lubricating Solid | MoS₂ | — | — |
| Solids (By Weight) | 37 - 41 | % | — |
| Theoretical Coverage (0.5 mils) | 458.0 | ft²/gal | — |
| VOC Content | 0.0 | grams/liter | — |
| Value | Units | Test Method / Conditions | |
| Abrasion Resistance | Fair | — | ASTM D-4060 |
| Coefficient of Friction | 0.04 - 0.06 | — | ASTM D2714 |
| Corrosion Resistance Test Panel (5% Neutral Salt Spray) | max. 100 | hours | ASTM B117 |
| Corrosion Resistance Test Panel Coating Method (Grit Blasted Steel Panel) | 0.8 | mil | — |
| Dry Film Thickness | 0.5 - 1 | mils | — |
| Load Carrying Capacity | min. 250000 | psi | ASTM D2625, Method B |
| Operating Temperature Range | -300 - 800 | °F | — |
| Wear Life | max. 60 | minutes | ASTM D2625, Method A |
| Value | Units | Test Method / Conditions | |
| Acetone | Pass | — | ASTM D-2510, Method C |
| Anti-Icing Fluids | Pass | — | ASTM D-2510, Method C |
| Diethanolamine | Pass | — | ASTM D-2510, Method C |
| Distilled Water | Not Recommended | — | ASTM D-2510, Method C |
| Hydraulic Fluids | Pass | — | ASTM D-2510, Method C |
| Hydrochloric Acid (10%) | Not Recommended | — | ASTM D-2510, Method C |
| Isopropyl Alcohol or Ethyl Alcohol | Pass | — | ASTM D-2510, Method C |
| Jet Fuels (JP-4) | Pass | — | ASTM D-2510, Method C |
| Mineral Spirits or Paint Thinner | Pass | — | ASTM D-2510, Method C |
| Skydrol 500 | Pass | — | ASTM D-2510, Method C |
| Sodium Hydroxide (10%) | Not Recommended | — | ASTM D-2510, Method C |
| Toluene | Pass | — | ASTM D-2510, Method C |
| Trichloroethylene | Pass | — | ASTM D-2510, Method C |
Packaging & Availability
- Packaging
Esnalube 382 is available in gallons and quarts.
Storage & Handling
- Shelf Life & Storage
One year from date of shipment, stored in a factory sealed container between the temperatures, 40°F to 100°F. Coatings are thermally stable, but we do not recommend prolonged exposure outside of the specified temperature range listed above.