Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features & Benefits
- Excellent thermal stability.
- Excellent stability in vacuum.
- Good wear life.
- Ideal for higher load carrying applications.
Applications & Uses
- Applications
- Application Method
- Markets
- Aerospace/Defense
- Fasteners
- Mechanical Components
- Chemical Processing
- Typical Applications
- Bearing guides and races.
- Threaded connectors and disconnects.
- Bushings, rotary joints, and cams.
- Rings and Seals.
- Suggested Pretreatment
Grit Blast
- Suggested Application Method
Dip Spin / Spray
- Dilution/Cleanup Solvent
May be thinned with Deionized Water less than 10% by volume.
- Cure Cycle
2 hours at 175°F then 2 hours at 400°F.
Properties
- Physical Properties
- Typical Properties
- Chemical Resistance
Value | Units | Test Method / Conditions | |
Binder | Sodium Silicate | — | — |
Carrier | Water Borne | — | — |
Appearance | Bluish-Black Finish | — | — |
Density | 10.4 - 11.4 | Ib/gal | — |
Lubricating Solid | MoS₂ | — | — |
Solids (By Weight) | 29.5 - 33.5 | % | — |
Theoretical Coverage (0.5 mils) | 320.0 | ft²/gal | — |
VOC Content | 0.0 | grams/liter | — |
Value | Units | Test Method / Conditions | |
Abrasion Resistance | Fair | — | ASTM D-4060 |
Coefficient of Friction | 0.04 - 0.06 | — | ASTM D2714 |
Corrosion Resistance Test Panel | 24 - 72 | hours | ASTM B117 |
Corrosion Resistance Test Panel Coating Method (Grit Blasted Steel Panel) | 0.5 | mil | — |
Dilution Ratio (By Volume) | max.10 | % | — |
Dry Film Thickness | 0.3 - 1 | mils | — |
Load Carrying Capacity | min. 250000 | psi | ASTM D2625, Method B |
Operating Temperature Range | -365 - 750 | °F | — |
Wear Life | min. 30 | minutes | ASTM D2625, Method A |
Value | Units | Test Method / Conditions | |
Acetone | Pass | — | ASTM D-2510, Method C |
Anti-Icing Fluids | Pass | — | ASTM D-2510, Method C |
Diethanolamine | Pass | — | ASTM D-2510, Method C |
Distilled Water | Not Recommended | — | ASTM D-2510, Method C |
Hydraulic Fluids | Pass | — | ASTM D-2510, Method C |
Hydrochloric Acid (10%) | Not Recommended | — | ASTM D-2510, Method C |
Isopropyl Alcohol or Ethyl Alcohol | Pass | — | ASTM D-2510, Method C |
Jet Fuels (JP-4) | Pass | — | ASTM D-2510, Method C |
Mineral Spirits or Paint Thinner | Pass | — | ASTM D-2510, Method C |
Skydrol 500 | Not Recommended | — | ASTM D-2510, Method C |
Sodium Hydroxide (10%) | Not Recommended | — | ASTM D-2510, Method C |
Toluene | Pass | — | ASTM D-2510, Method C |
Trichloroethylene | Pass | — | ASTM D-2510, Method C |
Packaging & Availability
- Packaging Type
- Packaging
Everlube 812 is available is gallon, 5-gallon pail, and quart.
Storage & Handling
- Shelf Life & Storage
One year from date of shipment, stored in a factory sealed container between the temperatures, 40°F to 100°F. Coatings are thermally stable, but we do not recommend prolonged exposure outside of the specified temperature range listed above.