Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Typical Applications
A tough plastic with high strength and low creep tendencies, used for the manufacture of seats, bearings, gears, guides and pump components etc. Exhibits very low water absorption and excellent abrasion and wear resistance.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.41 | — | — |
| Tensile Strength at Yield | 65.0 | Mpa | — |
| Elongation at Break | 25 - 45 | % | — |
| Hardness (Rockwell) | M84 | — | — |
| Maximum Service Temperature (Continuous) | 105.0 | °C | — |
| Maximum Service Temperature (Intermittent) | 140.0 | °C | — |
| Minimum Service Temperature | (-50) | °C | — |
| Vicat Softening Temperature | 150.0 | °C | — |
| Water Absorption (in water at 23°C) | 0.8 | % | — |
| Water Absorption (in air at 23°C) | 0.2 | % | — |
| Coefficient of Linear Expansion (23 - 60°C) | 110x10-6 | K^(-1) | — |
| Coefficient of Thermal Expansion (23 - 100°C) | 125x10-6 | K^(-1) | — |
| Wear Rate | 8.9 | µm/km | — |
| Coefficient of Friction (hardened and ground steel, p = 0.05 MPa, v=0.6 m/s) | 0.32 | — | — |
Regulatory & Compliance
- Certifications & Compliance