Company logo

Products

Gellner
Matching Product Categories
CASE Ingredients
34 products found on Gellner.
With SDS
With TDS
Wonderwet™ Iv product card banner

Gellner

WONDERWET™ IV

Chemical Family: Acrylics & Acrylates

End Uses: Waterborne Coating, Stains

Features: Good Leveling, Good Gloss Retention, Excellent Freeze/Thaw Stability, UV Resistance, Long Open Time, Excellent Flow

WONDERWET™ IV is a water-soluble acrylic polymer resin designed to retard the drying rate of any water-based paint, printing ink, or adhesive. It is particularly effective in improving the wet edge or open time of low- and zero-VOC flat and non-flat paints and coatings when glycols and other solvents have been replaced or reduced. This product will improve the flow, leveling, and appearance of a given paint.

Ottopol Sx-30 product card banner

Gellner

Ottopol SX-30

Chemical Family: Acrylics & Acrylates

End Uses: Flexography Ink, Gravure Ink

Compatible Substrates & Surfaces: Paper, Metal, Plastics

Glass Transition Temperature (Tg): -30.0 - -30.0 °C

Features: Good Leveling, Solvent Resistance, Multi-Substrate Adhesion, High Gloss, Alkali Resistance, Long Open Time, Excellent Flow, Excellent Adhesion

Ottopol SX-30 is a self-crosslinking acrylic emulsion for flexo or gravure printed films. This translucent emulsion polymer exhibits resistance to alkalis and solvents, such as diluted alcohol solutions. It has excellent adhesion to substrates and provides excellent resolubility properties when applied.

Ottopol K-633 product card banner

Gellner

Ottopol K-633

Functions: Grinding Aid, Binder & Resin

Chemical Family: Acrylics & Acrylates

Compatible Substrates & Surfaces: Metal, Plastics, Textiles, Paper

Ottopol K-633 is a low-molecular-weight cationic acrylic resin solution. It provides alkali resistance and adhesion to non-porous substrates with improved solubility. This product is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down with these resins to produce printing inks and coatings.

Ottopol S-100 product card banner

Gellner

Ottopol S-100

Chemical Family: Acrylics & Acrylates

End Uses: Flexography Ink, Gravure Ink

Compatible Substrates & Surfaces: Paper

Glass Transition Temperature (Tg): 50.0 - 50.0 °C

Features: High Gloss, Good Leveling, Excellent Flow, Excellent Adhesion, Excellent Solubility

Ottopol S-100 is a non-film-forming emulsion polymer for glossy flexo and gravure inks. This product has exceptionally good adhesion to vinyl and other non-porous substrates and provides non-curling properties. It has improved flow and leveling characteristics, which provide a high gloss finish.

Ottopol Kx-99 product card banner

Gellner

Ottopol KX-99

Chemical Family: Acrylics & Acrylates

Glass Transition Temperature (Tg): 32.0 - 32.0 °C

Features: Solvent Resistance, Water Resistance, Stain Resistance, Room Temperature Curing, Reduced Wear

Ottopol KX-99 is a hydroxyl-functional cationic acrylic solution polymer that crosslinks with polyisocyanates and epoxy silanes at room temperature. With the combination of polyisocyanate and epoxy silane, the fastest and most resistant coating can be formulated. We recommend a maximum of 20% epoxy silane and 20% polyisocyanate based on solids. This product undergoes ambient curing very quickly, and in less than one hour the film will have water resistance. Allowing the film to cure for two hours will result in a film that has over 100 double rubs of acetone resistance. Detergents and cleaners will not remove this film, and the final dried film resists staining.

Ottopol Sx-100 product card banner

Gellner

Ottopol SX-100

Chemical Family: Acrylics & Acrylates

End Uses: Flexography Ink, Gravure Ink

Compatible Substrates & Surfaces: Paper

Glass Transition Temperature (Tg): 50.0 - 50.0 °C

Features: Abrasion Resistance, Multi-Substrate Adhesion, High Gloss, Good Leveling, Alkali Resistance, Solvent Resistance, Blocking Resistance, Long Open Time, Excellent Flow

Ottopol SX-100 is a self-crosslinking acrylic emulsion for alkali resistance. This product has exceptionally good adhesion to substrates and is non-film-forming for glossy flexo and gravure inks. Due to the internal cross-linking mechanism, it also has improved block and scuff resistance.

Ottopol 523 product card banner

Gellner

Ottopol 523

Chemical Family: Acrylics & Acrylates

Glass Transition Temperature (Tg): 105.0 - 105.0 °C

Features: Solvent Resistance, Stain Resistance, Blocking Resistance

Ottopol 523 is a hard acrylic emulsion with hydroxyl functionality. This functionality allows crosslinks with melamine and isocyanates for excellent solvent resistance. Formulations using aziridine will require a plasticizer or coalescent solvent to aid in the film formation of the dried coating. The use of aziridine will result in a short pot life and will cross-link at room temperature. Formulations using melamine and PTSA (Para-Toluene Sulfonic Acid) are stable for a minimum of thirty days. The starting formulation requires a web temperature of 180°F to activate the cross-linking of the resins. An increase in PTSA will lower the temperature required to activate cross-linking, but larger amounts of PTSA will increase the hardness of the dry film. There are no plasticizers or coalescent aids required for film formation when using a melamine resin with this product.

Ottopol Cs-58 product card banner

Gellner

Ottopol CS-58

Chemical Family: Acrylics & Acrylates

Glass Transition Temperature (Tg): 12.0 - 12.0 °C

Ottopol CS-58 is an anionic acrylic emulsion that is used as a binder for house paints and pigment dispersions.

Ottopol Sx-75 product card banner

Gellner

Ottopol SX-75

Chemical Family: Acrylics & Acrylates

End Uses: Flexography Ink, Gravure Ink

Glass Transition Temperature (Tg): 25.0 - 25.0 °C

Features: Excellent Adhesion, Abrasion Resistance, High Gloss, Good Leveling, Alkali Resistance, Solvent Resistance, Blocking Resistance, Long Open Time, Excellent Flow

Ottopol SX-75 is a self-crosslinking acrylic emulsion with good gloss for flexo and gravure printing. This product has alkali resistance and exceptionally good adhesion to vinyl and other non-porous substrates. Due to the internal cross-linking mechanism, it also has improved block and scuff resistance.

Ottopol 151 product card banner

Gellner

Ottopol 151

Chemical Family: Acrylics & Acrylates

Compatible Substrates & Surfaces: Elastomers & Rubbers

Glass Transition Temperature (Tg): 25.0 - 25.0 °C

Features: Water Resistance

Ottopol 151 is an anionic acrylic emulsion with a low glass transition temperature of -25°C. It showed excellent water resistance after a 4 hour ambient cure of a wet, 25 mil thick film. This product is mainly used for elastomeric roof coatings.

Ottopol M-49 product card banner

Gellner

Ottopol M-49

Chemical Family: Acrylics & Acrylates

Glass Transition Temperature (Tg): 20.0 - 20.0 °C

Features: Good Compatibility, Excellent Adhesion, Good Pigment Wetting, Water Resistance, Improved Ageing Resistance

Ottopol M-49 is an emulsion polymer with excellent adhesion properties. It has been neutralized with dimethylethanolamine, which yields excellent pigment wetting. The exclusion of ammonia and neutralization with DMEA do not promote the tarnishing of metallic pigments. This product has been proven to have good aging stability and compatibility with additives and other resin systems.

Ottopol K-65 product card banner

Gellner

Ottopol K-65

Chemical Family: Acrylics & Acrylates

End Uses: Varnishes

Compatible Substrates & Surfaces: Plastics, Paper, Metal, Textiles

Glass Transition Temperature (Tg): 81.0 - 81.0 °C

Features: Long Open Time, Excellent Flow, High pH Resistance, Excellent Solubility, Good Leveling, Alkali Resistance

Ottopol K-65 is a hard cationic acrylic emulsion for alkali resistance. This product has exceptionally good adhesion to plastic films, foils, and other metallic surfaces. Additionally, when this product is formulated with Ottopol K-633, it has improved flow, leveling, and open time when compared to Ottopol K-362.

Ottopol 300 product card banner

Gellner

Ottopol 300

Chemical Family: Acrylics & Acrylates

End Uses: Waterborne Coating, Sealer

Features: Outdoor Durability, Low Foaming, Less Dirt Pick Up Potential, Low Odor

Ottopol 300 is a flexible, 100% anionic acrylic emulsion polymer with excellent film-forming properties and resistance to grain cracking and flaking when applied over bare wood. This product also exhibits superior tint retention when compared to other conventional acrylic polymers.

Ottopol 1320 product card banner

Gellner

Ottopol 1320

Chemical Family: Acrylics & Acrylates

End Uses: Sealer

Compatible Substrates & Surfaces: Terrazzo, Concrete, Masonry, Tile

Glass Transition Temperature (Tg): 18.0 - 18.0 °C

Features: Good Toughness, Abrasion Resistance, Chemical Resistance, Reduced Wear, Alkali Resistance, UV Resistance

Ottopol 1320 is a medium-hard, tough, all-anionic acrylic emulsion with outstanding chemical, abrasion, and wear resistance. The built-in crosslinker provides chemical resistance properties approaching PUD performance. It is also alkali-tolerant and retards the efflorescence of terrazzo and masonry. This product can be used in traffic paint and other exterior applications.

Ottopol 510-28 product card banner

Gellner

Ottopol 510-28

Chemical Family: Acrylics & Acrylates

Glass Transition Temperature (Tg): 32.0 - 32.0 °C

Features: Solvent Resistance, Salt Resistance

Ottopol 510-28 is an anionic hydroxyl functional acrylic solution polymer that crosslinks with melamine and isocyanates. This product has excellent salt, fog, and solvent resistance.

Ottopol Ko product card banner

Gellner

Ottopol KO

Chemical Family: Styrenics, Styrene Copolymers, Styrene-Acrylic Copolymer

Glass Transition Temperature (Tg): 0.0 - 0.0 °C

Features: Blocking Resistance, Excellent Adhesion, Multi-Substrate Adhesion, Stain Resistance

Ottopol KO is a cationic styrene/acrylic emulsion. This co-polymer is the latest in stain-blocking technology. It blocks tannin oils, stains on drywall, water stains from concrete blocks in basements, and fungal growth in damp or humid environments. The products made from this polymer display excellent adhesion to a variety of surfaces.

Ottopol 1960 product card banner

Gellner

Ottopol 1960

Chemical Family: Acrylics & Acrylates

End Uses: Solventless & High Solids Coating

Compatible Substrates & Surfaces: Masonry, Plastics, Metal

Glass Transition Temperature (Tg): 42.0 - 42.0 °C

Features: Excellent Adhesion, Multi-Substrate Adhesion, Corrosion Resistance, High Performance

Ottopol 1960 is an anionic acrylic emulsion used as a high-solids binder. It exhibits excellent adhesion to metal, plastic, and masonry substrates and provides built-in flash rust protection. This product is suitable for high-performance sealants, patching compounds, contact adhesives, and coating formulations.

Ottopol K-66 product card banner

Gellner

Ottopol K-66

Chemical Family: Acrylics & Acrylates

End Uses: Varnishes

Compatible Substrates & Surfaces: Paper, Metal, Textiles, Plastics

Glass Transition Temperature (Tg): 86.0 - 86.0 °C

Features: Good Leveling, Alkali Resistance, Long Open Time, Excellent Flow, High pH Resistance, Excellent Solubility

Ottopol K-66 is a hard cationic acrylic emulsion for alkali resistance. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. To aid in film formation, a coalescent solvent such as Texanol can be added.

Ottopol K-12t product card banner

Gellner

Ottopol K-12T

Chemical Family: Acrylics & Acrylates

End Uses: Solventborne Coating, Top Coat, Primer, Waterborne Coating

Glass Transition Temperature (Tg): 0.0 - 0.0 °C

Ottopol K-12T is a cationic acrylic emulsion that is used as a rust-converting primer. It converts the rust of the coating application to a black iron oxide barrier, which can be further top-coated with water- or solvent-based paints. This product does not contain tannic acid, oxime chelates, phosphates, or phosphoric acid.

Ottopol Sf-49 product card banner

Gellner

Ottopol SF-49

Chemical Family: Acrylics & Acrylates

End Uses: Primer

Compatible Substrates & Surfaces: Metal

Features: Corrosion Resistance, High Gloss, Water Resistance

Ottopol SF-49 is a self-crosslinking acrylic emulsion that can be formulated into a corrosion-resistant primer or semi-gloss paint. The dry film has outstanding water resistance and will not blush even after prolonged exposure to water.

Ottopol M-30 product card banner

Gellner

Ottopol M-30

Chemical Family: Acrylics & Acrylates

Compatible Substrates & Surfaces: Metal

Glass Transition Temperature (Tg): 38.0 - 38.0 °C

Features: Good Compatibility, Strong Fluorescence

Ottopol M-30 is the DMEA-cut version of Ottopol 25-50E. This acrylic resin solution is an ink vehicle suitable for and compatible with metallic and fluorescent inks. It has minimal soft settling of the metallic powder, no tarnishing, and no pH swing.

Ottopol 502 product card banner

Gellner

Ottopol 502

Chemical Family: Acrylics & Acrylates

End Uses: Waterborne Coating

Glass Transition Temperature (Tg): 88.0 - 88.0 °C

Features: Blocking Resistance, Good Compatibility

Ottopol 502 is a non-ionic acrylic emulsion designed to increase the blocking of ordinary systems. This hard, non-film forming polymer improves the resistance properties of a standard ink or coating and has excellent compatibility with a wide range of resins.

Ottopol Kx-101 product card banner

Gellner

Ottopol KX-101

Chemical Family: Acrylics & Acrylates

Glass Transition Temperature (Tg): 32.0 - 32.0 °C

Features: Water Resistance

Ottopol KX-101 is a hydroxyl-functional cationic acrylic solution polymer that crosslinks with polyisocyanates and epoxy silanes at room temperature. With the combination of polyisocyanate and epoxy silane, the fastest and most resistant coating can be formulated. We recommend a maximum of 11.5% epoxy silane and 11.5% polyisocyanate based on solids. This product undergoes ambient curing very quickly, and in 15 minutes the film will have water resistance. Allowing the film to cure for four hours will result in a film that has over 100 double rubs of acetone resistance. Detergents and cleaners will not remove this film, and the final dried film resists staining.

Ottopol Sx-50 product card banner

Gellner

Ottopol SX-50

Chemical Family: Acrylics & Acrylates

Compatible Substrates & Surfaces: Paper, Metal, Plastics

Glass Transition Temperature (Tg): 0.0 - 0.0 °C

Features: Good Leveling, Solvent Resistance, Blocking Resistance, Abrasion Resistance, Multi-Substrate Adhesion, High Gloss, Alkali Resistance, Long Open Time, Excellent Flow, Excellent Adhesion

Ottopol SX-50 is a self-crosslinking acrylic emulsion with good adhesion to non-porous surfaces. This product has alkali resistance and exceptionally good adhesion to plastic films, foils, and other metallic surfaces. Due to the internal cross-linking mechanism, it also has improved block and scuff resistance.

Gellner Wonderblock product card banner

Gellner

Gellner Wonderblock

Chemical Family: Acrylics & Acrylates

End Uses: Top Coat, Primer, Waterborne Coating

Features: Stain Resistance, Blocking Resistance

Gellner Wonderblock is a new binder technology for waterborne stain-blocking primers. This product forms a resistant barrier to water-soluble tannins and prevents topcoats from staining. The polymer backbone discovered by our research chemists is resistant to tannin and nicotine stains. It forms an impenetrable barrier that outperforms all other attempts at solving the bleeding of stains.

Ottopol S-75 product card banner

Gellner

Ottopol S-75

Chemical Family: Acrylics & Acrylates

End Uses: Flexography Ink, Gravure Ink

Compatible Substrates & Surfaces: Paper

Glass Transition Temperature (Tg): 25.0 - 25.0 °C

Features: Excellent Adhesion, Excellent Solubility, High Gloss, Good Leveling, Good Non-Curling Properties, Excellent Flow

Ottopol S-75 is a film-forming acrylic emulsion polymer that is suitable for inks and coatings on paper and board. This product has good adhesion to vinyl and other non-porous substrates that require a hard film. It also provides excellent resolubility properties, a high-gloss finish, and non-curling properties.

Ottopol S-50 product card banner

Gellner

Ottopol S-50

Chemical Family: Acrylics & Acrylates

End Uses: Flexography Ink, Gravure Ink

Glass Transition Temperature (Tg): 0.0 - 0.0 °C

Features: High Gloss, Good Leveling, Good Non-Curling Properties, Excellent Flow, Excellent Adhesion, Excellent Solubility

Ottopol S-50 is an acrylic emulsion polymer with good adhesion to vinyl and other non-porous surfaces. It provides excellent resolubility properties for flexo and gravure printing applications, and the flow and leveling characteristics provide a high gloss finish. This resin also has non-curling properties.

Ottopol S-30 product card banner

Gellner

Ottopol S-30

Chemical Family: Acrylics & Acrylates

End Uses: Flexography Ink, Gravure Ink

Compatible Substrates & Surfaces: Plastics

Glass Transition Temperature (Tg): -20.0 - -20.0 °C

Features: High Gloss, Good Leveling, Good Non-Curling Properties, Excellent Flow, Excellent Adhesion, Excellent Solubility

Ottopol S-30 is an acrylic emulsion with a low glass transition temperature of -20°C. It is used for adhesion to plastic films, vinyl, and other non-porous substrates that require a hard film. This product is suitable for flexo or gravure printing applications.

Ottopol Sf-42 product card banner

Gellner

Ottopol SF-42

Chemical Family: Acrylics & Acrylates

Glass Transition Temperature (Tg): 5.0 - 5.0 °C

Ottopol SF-42 is an anionic acrylic emulsion that is compatible with water-reducible alkyds. This chemical is recommended for use as a binder or coating.

Ottopol K-23 product card banner

Gellner

Ottopol K-23

Functions: Grinding Aid, Binder & Resin

Chemical Family: Acrylics & Acrylates

Compatible Substrates & Surfaces: Plastics, Textiles, Paper

Ottopol K-23 is a cationic acrylic copolymer emulsion used for alkali resistance and adhesion to non-porous substrates. It is designed for use as a grinding and letdown vehicle for water-based flexographic and rotogravure inks. It is also suitable for use as an overprint varnish.

Ottopol G-35 product card banner

Gellner

Ottopol G-35

Functions: Binder & Resin, Grinding Aid

Chemical Family: Acrylics & Acrylates

Ottopol G-35 is an acrylic resin solution with an acid number of 200. It is suitable as a grinding vehicle and imparts excellent flow and levelling to inks and varnishes. This product provides superior printing qualities, good pigment wetting, and excellent gloss.

Ottopol 1450 product card banner

Gellner

Ottopol 1450

Glass Transition Temperature (Tg): 24.0 - 24.0 °C

Ottopol 1450 is a hard-modified anionic acrylic emulsion with abrasion and wear resistance. This product has good UV resistance, chemical resistance, and resistance to blush. It has outstanding compatibility with urethane emulsions, providing essentially water-clear blends. It is used as wood finishes and cement sealers.

Ottopol K-362 product card banner

Gellner

Ottopol K-362

Functions: Grinding Aid, Binder & Resin

Chemical Family: Acrylics & Acrylates

Compatible Substrates & Surfaces: Metal, Plastics, Textiles, Paper

Ottopol K-362 is a solution polymer for alkali resistance and adhesion to non-porous substrates. This product is suitable for use as a grinding vehicle for organic and inorganic pigments. Additionally, pigment concentrates can be let down with these resins to produce printing inks and coatings.

Ottopol Sf-45 product card banner

Gellner

Ottopol SF-45

Glass Transition Temperature (Tg): 39.0 - 39.0 °C

Ottopol SF-45 is a unique acrylic polymer that results in a high-density, cross-linked polymer upon drying at room temperature. Where solvent resistance is required, many coatings can be derived from this polymer. It is mainly used as a coating for wood or wooden furniture.