Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Gellner
All Gellner
Search products
Matching Product Categories
CASE Ingredients
Markets
Certifications & Compliance
Labeling Claims
Physical Form
All Filters
10 Products found on Gellner
Most Viewed
SDS
With SDS
TDS
With TDS
WONDERWET™ IV
Chemical Family:
Acrylics & Acrylates
End Uses:
Waterborne Coating, Stains
Features:
Good Leveling, Good Gloss Retention, Excellent Freeze/Thaw Stability, UV Resistance, Long Open Time, Excellent Flow
WONDERWET™ IV is a water-soluble acrylic polymer resin designed to retard the drying rate of any water-based paint, printing ink, or adhesive. It is particularly effective in improving the wet edge or open time of low- and zero-VOC flat and non-flat paints and coatings when glycols and other solvents have been replaced or reduced. This product will improve the flow, leveling, and appearance of a given paint.
Ottopol M-30
Chemical Family:
Acrylics & Acrylates
Compatible Substrates & Surfaces:
Metal
Glass Transition Temperature (Tg):
38.0 - 38.0 °C
Features:
Good Compatibility, Strong Fluorescence
Ottopol M-30 is the DMEA-cut version of Ottopol 25-50E. This acrylic resin solution is an ink vehicle suitable for and compatible with metallic and fluorescent inks. It has minimal soft settling of the metallic powder, no tarnishing, and no pH swing.
Ottopol S-75
Chemical Family:
Acrylics & Acrylates
End Uses:
Flexography Ink, Gravure Ink
Compatible Substrates & Surfaces:
Paper
Glass Transition Temperature (Tg):
25.0 - 25.0 °C
Features:
Excellent Adhesion, Excellent Solubility, High Gloss, Good Leveling, Good Non-Curling Properties, Excellent Flow
Ottopol S-75 is a film-forming acrylic emulsion polymer that is suitable for inks and coatings on paper and board. This product has good adhesion to vinyl and other non-porous substrates that require a hard film. It also provides excellent resolubility properties, a high-gloss finish, and non-curling properties.
Ottopol S-50
Chemical Family:
Acrylics & Acrylates
End Uses:
Flexography Ink, Gravure Ink
Glass Transition Temperature (Tg):
0.0 - 0.0 °C
Features:
High Gloss, Good Leveling, Good Non-Curling Properties, Excellent Flow, Excellent Adhesion, Excellent Solubility
Ottopol S-50 is an acrylic emulsion polymer with good adhesion to vinyl and other non-porous surfaces. It provides excellent resolubility properties for flexo and gravure printing applications, and the flow and leveling characteristics provide a high gloss finish. This resin also has non-curling properties.
Ottopol S-100
Chemical Family:
Acrylics & Acrylates
End Uses:
Flexography Ink, Gravure Ink
Compatible Substrates & Surfaces:
Paper
Glass Transition Temperature (Tg):
50.0 - 50.0 °C
Features:
High Gloss, Good Leveling, Excellent Flow, Excellent Adhesion, Excellent Solubility
Ottopol S-100 is a non-film-forming emulsion polymer for glossy flexo and gravure inks. This product has exceptionally good adhesion to vinyl and other non-porous substrates and provides non-curling properties. It has improved flow and leveling characteristics, which provide a high gloss finish.
Ottopol S-30
Chemical Family:
Acrylics & Acrylates
End Uses:
Flexography Ink, Gravure Ink
Compatible Substrates & Surfaces:
Plastics
Glass Transition Temperature (Tg):
-20.0 - -20.0 °C
Features:
High Gloss, Good Leveling, Good Non-Curling Properties, Excellent Flow, Excellent Adhesion, Excellent Solubility
Ottopol S-30 is an acrylic emulsion with a low glass transition temperature of -20°C. It is used for adhesion to plastic films, vinyl, and other non-porous substrates that require a hard film. This product is suitable for flexo or gravure printing applications.
Ottopol 523
Chemical Family:
Acrylics & Acrylates
Glass Transition Temperature (Tg):
105.0 - 105.0 °C
Features:
Solvent Resistance, Stain Resistance, Blocking Resistance
Ottopol 523 is a hard acrylic emulsion with hydroxyl functionality. This functionality allows crosslinks with melamine and isocyanates for excellent solvent resistance. Formulations using aziridine will require a plasticizer or coalescent solvent to aid in the film formation of the dried coating. The use of aziridine will result in a short pot life and will cross-link at room temperature. Formulations using melamine and PTSA (Para-Toluene Sulfonic Acid) are stable for a minimum of thirty days. The starting formulation requires a web temperature of 180°F to activate the cross-linking of the resins. An increase in PTSA will lower the temperature required to activate cross-linking, but larger amounts of PTSA will increase the hardness of the dry film. There are no plasticizers or coalescent aids required for film formation when using a melamine resin with this product.
Ottopol CS-58
Chemical Family:
Acrylics & Acrylates
Glass Transition Temperature (Tg):
12.0 - 12.0 °C
Ottopol CS-58 is an anionic acrylic emulsion that is used as a binder for house paints and pigment dispersions.
Ottopol G-35
Functions:
Binder & Resin, Grinding Aid
Chemical Family:
Acrylics & Acrylates
Ottopol G-35 is an acrylic resin solution with an acid number of 200. It is suitable as a grinding vehicle and imparts excellent flow and levelling to inks and varnishes. This product provides superior printing qualities, good pigment wetting, and excellent gloss.
Ottopol 25-30
Functions:
Grinding Aid, Binder & Resin
Chemical Family:
Acrylics & Acrylates
Compatible Polymers & Resins:
Polyesters, Cellulose & Cellulosics, Polyvinyl Chloride (PVC), Polystyrenes (PS)
Ottopol 25-30 is the ammonia-cut version of Ottopol 25-50E. This solution polymer has good adhesion to non-porous surfaces. Belonging to the Ottopol 25 Series, it is specifically designed for use as a grinding and letdown vehicle for water-based rotogravure and flexographic inks. It provides high gloss and excellent press stability. Ink and coating makers will benefit from the versatility of this series as a sole binder or component of high-gloss inks and overlay varnishes. These polymers are derived from the same monomer composition, and the dry resin is identical throughout the series.