Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Coating Type
- Recommended Uses & Known Applications
GP BLS-2700 resin is used in protective coating applications of rigid metal substrates including drums, pails, tanks, and railcars and as a wash primer.
Properties
- Physical Form
- Appearance
- Solution in Ethanol
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Solids | 54–58 | % | — |
| Specific Gravity (at 25 °C) | approx. 1.06–1.07 | — | — |
| Viscosity | 300–450 | cP | — |
Regulatory & Compliance
- Certifications
GP BLS-2700 coating resin is compliant with FDA 21 CFR Part 175 Indirect Food Additives: Adhesives and Components of Coatings per 175.105 as a component of an adhesive and 175.300 as a resinous and polymeric coating. It also complies with 177.1210 as a component in closures with sealing gaskets for food containers.
Storage & Handling
- Storage and Handling
- It is recommended that heat-reactive GP BLS-2700 resin be stored in a dry place at temperatures at or below 50°F (10°C) to optimize shelf life. Storage in sunlight should be avoided. Storage life is dependent on your product’s formulation using GP BLS-2700 resin. This product should be stored and used in areas with good ventilation.
- The proper personal protective equipment should be worn whenever GP BLS-2700 resin is used or handled. For safety and health information, please refer to the Safety Data Sheet available from Georgia-Pacific Chemicals.