Products

T-Det® O 407 is a 70% active solution of T-Det® O 40, a nonionic surface-active agent produced by the reaction of octyl phenol with 40 moles of ethylene oxide. It is a water soluble nonionic used as a high temperature detergent and as an emulsifier stabilizer in various applications.

H-Sil® OE is a silicone-based odor eliminator designed for industrial and consumer applications. This product acts as an odor eliminator by neutralizing the nitrogen groups that are present in most odors. It is a concentrate that can be diluted at 5 - 10% by weight in water for most applications. No other additives are needed. Fragrances can be added to the dilution by using common surfactants and fragrance bases. 5% dilutions of H-Sil® OE were successfully compared against leading industrial and consumer products via a test panel, and it consistently outlasted the competitors. At a use level of 5 - 10%, this product was successfully tested against the following odors:

• Smoke
• Butyric acid (body odor)
• Amine odors
• Urine
• Ammonia

T-Det® N 507 is a 70% active solution of T-Det® N 50, a nonionic surfactant produced by the reaction of nonyl phenol with 50 moles of ethylene oxide. It is compatible with anionic surfactants and is stable in the presence of acids, bases, and salts.

H-Sil® SDF 12,500 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

T-Det® A 25-3 is a non-ionic surfactant suitable for laundry applications. For optimal results, it is recommended to use T-Det® A 25-3 in combination with T-Det® A 25-7 to formulate a broad-spectrum cleaner. The T-Det® 25-Series ethoxylates offer superior emulsification properties and help prevent soil redeposition during the cleaning process.

T-Det® A 1-7 is a non-ionic surfactant designed for hard surface cleaner formulations. It can be used in combination with higher HLB surfactants to effectively target low HLB soils, resulting in the formulation of broad-range cleaners. It appears as a clear to slight hazy liquid.

T-Det® LF 505 is a low-foaming nonionic surfactant that is soluble in water at temperatures below its cloud point. Additionally, it is soluble in polar solvents such as alcohols and glycol ethers, as well as in aromatic solvents like xylene, toluene, and benzene. It is designed for low-foaming applications such as rinse aids, metal cleaners, cold phosphate cleaners, and hard surface cleaners.

T-Mulz® 565-2 is a blended anionic surfactant designed primarily for making emulsifier systems for agricultural, latex, and industrial formulations. It provides coupling ability, emulsification power, and rapid wetting to the formulation. As supplied, it is a free acid and will react readily with basic compounds.

H-Sil® SDF 1000 cSt is a regular viscosity linear polymer that is often referred to as "polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

T-Det® N 7 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 7 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state. They are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

T-Det® CAM 7.5 is an ethoxylated product based on cocoamine. It is primarily used as a nonionic surfactant in various industrial and domestic formulations. It is also used as a cleaning agent, antistatic agent, dispersant, emulsifier in textile formulations, corrosion inhibitor in metals, etc.

T-Det® A 138-9 is an anhydrous liquid surface-active agent produced by the reaction of tridecyl alcohol with 8 moles of ethylene oxide at 90% active. It has a nonionic structure, making it compatible with anionic surfactants and stable in the presence of acids, bases, and salts.

T-Det® LF 460 is a slightly more hydrophilic version of T-Det® LF 416. This product is more alkali-compatible and requires less hydrotrope to produce a single-phase formulation. It is a 100% active alkoxylated alcohol that produces negligible amounts of foam while retaining excellent wetting power. This product functions well in rinse aid formulas and finds use in mechanical dishwashing and bottle-washing applications. It is also well suited to colder environments for storage, where a low set point is required. The favorable foam profile may be improved further by the addition of small amounts of T-Det® 1618 DI 302.

T-Det® N 14 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 14 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic surfactants and it is stable in the presence of acids, bases, and salts.

T-Det® CAM 2 is an ethoxylated product based on cocoamine. This product is primarily used as a nonionic surfactant in various industrial and domestic formulations. Additionally, it can also be used as a cleaning agent, antistatic agent, dispersant, or emulsifier in textile formulations, a corrosion inhibitor in metals, and an emulsifier in various applications.

T-Det® CAM 5 is an ethoxylated product based on cocoamine. It is primarily used as a nonionic surfactant in various industrial and domestic formulations. This product also serves as a cleaning agent, antistatic agent, dispersant, or emulsifier in textile formulations, as well as a corrosion inhibitor in metals and emulsifiers.

H-Sil® EM 1060 is a 60% active, nonionic emulsion of 10,000 cSt polydimethylsiloxane. This product can be used as-is or diluted with water to form a stable emulsion letdown. It is effective as a release agent for rubber, plastic, and shell metals in foundry applications. This product has additional applications in leather care, textiles, surface lubrication, surface protection, and gloss improvement.

T-Mulz® 66H is the potassium salt of an aromatic phosphate ester. It exhibits good solubility in highly alkaline liquid formulations and functions as an efficient hydrotrope for coupling nonionic surfactants into alkaline systems while simultaneously adding detergency and wetting properties. This product is recommended for use in heavy-duty liquid detergents, all-purpose hard surface cleaners, dry cleaning fluids, agricultural formulations, and textile products.

T-Det® A 91 424 EPO is a non-ionic surfactant with superior wetting. This readily biodegradable surfactant has outstanding formulation and handling properties, rapid dissolution, and good rinseability. The product has a pale yellow liquid appearance, a low odor, low free alcohol content, and excellent oily soil removal characteristics.

T-Det® N 100F is an anhydrous, non-ionic surfactant that is soluble in certain solvents and insoluble in others. It is produced by the reaction of nonylphenol with 85 moles of ethylene oxide. This non-ionic surface-active agent is compatible with anionic and cationic surfactants and is stable in the presence of acids, bases, and salts.

T-Mulz® 844 is a phosphate ester designed for use in alkaline cleaners, textiles in yarn lubricants, and wet processing. This product is used in concentrated electrolyte solutions to improve salt tolerance and as a hydrotrope that provides detergency, wetting, and coupling properties.

H-Sil® STS is a low-molecular-weight, nonionic silicone surfactant that imparts low surface tension to formulated household and agricultural products. It improves the wetting and detergency of neutral household cleaning detergents and degreasers on hard surfaces. This product will improve the wetting, spreading, and penetration of agricultural chemicals and is an additive for use in pesticide products or as a tank-mix adjuvant. It can achieve surface tensions of 22 m/M with rates as low as 0.01% in aqueous-based agriculture and coating formulas, thus improving spreading across a variety of surfaces. This product is exempt from tolerance under 40 CFR 180.1001(c) for agricultural uses.

T-Det® A 138 is an anhydrous liquid surface-active agent produced by the reaction of tridecyl alcohol with 8 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic and cationic surfactants, and it is stable in the presence of acids, bases, and salts.

T-Det® N 8 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 8 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state. They are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

H-Sil® SDF 30,000 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

T-Det® C 18 is a liquid nonionic surface-active agent produced by the reaction of castor oil with 18 moles of ethylene oxide. Due to its nonionic structure, it can be combined with both anionic and cationic surface-active agents. T-Det® C 18 is dispersible in water with agitation.

H-Sil® SDF 10,000 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

T-Det® A 1-3 is a nonionic surfactant intended for hard surface cleaner formulations. It can be used with high HLB surfactants to tackle low HLB soils and is effective in formulating broad-range cleaners. It appears as a clear to slight hazy liquid.

T-Det® N 5 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 5 moles of ethylene oxide. This product is regarded as non-hazardous, however, it is considered to possess low acute oral and skin penetration and should not be used in products for internal use. It appears as a colorless, clear liquid.

T-Mulz® 810 is an alcohol-based phosphate ester designed for use in alkaline cleaners, yarn lubricants, and concentrated electrolyte solutions to improve salt tolerance. This product is also used as a hydrotrope that provides detergency, wetting, and coupling. It is compatible with both anionic and nonionic surfactants.

T-Det® A 267-9 is a biodegradable, 7-mole ethoxylate of a linear C12-C16 alcohol with 90% active content. It has exceptional detergent properties and can be used in various cleaning formulations. This product appears as a clear liquid at room temperature.

H-Sil® SDF 200 cSt is a regular viscosity linear polymer that is often referred to as "polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

T-Det® A 1374 EPO functions as a highly effective nonionic surfactant, providing exceptional versatility and performance. This liquid surfactant is water-soluble, making it ideal for a wide range of applications where solubility in water is essential. The reliable and efficient surfactant properties of T-Det® A 1374 EPO ensure consistent results, enhancing the performance of your formulations.

T-Mulz® 844 M is a phosphate ester designed for use in alkaline cleaners, yarn lubricants, and wet processing. It demonstrates excellent salt tolerance, especially under alkaline conditions. This product also functions well as a hydrotrope and can couple solvent, electrolyte, and surfactant mixtures. Additional benefits of using T-Mulz® 844 M include improved wetting and detergency. This product also finds application as a primary emulsion polymerization surfactant and is well suited to acrylic latexes.

H-Sil® EM-60 HG is a proprietary blend of silicone fluids and reactive organo-silicones emulsified into a high-solids emulsion. It is designed to provide premium performance as a tire and vinyl dressing. This product is easily diluted with water to form a stable dispersion for use levels ranging from 10 to 20% actives. A 20% active product gives excellent all-round performance by delivering a high-gloss, durable (several washings) coating to tires and vinyl.

T-Det® A 1330-7 is a 70% active polymeric surfactant without APE (alkylphenol ethoxylates), made for use in emulsion polymerization systems. It can act as a standalone primary emulsifier or be used with other co-surfactants. Its special reaction profile reduces the levels of polyethylene glycols, which can cause problems in latex production and post-processing. This product can be added later in the production process of acrylic latexes to improve stability against changes in viscosity, thickening under stress, and separation during freeze-thaw cycles. This surfactant is suitable for both acrylic and styrene-acrylic latexes.