Products

T-Det® O 407 is a 70% active solution of T-Det® O 40, a nonionic surface-active agent produced by the reaction of octyl phenol with 40 moles of ethylene oxide. It is a water soluble nonionic used as a high temperature detergent and as an emulsifier stabilizer in various applications.

T-Mulz® 1183 is a complex, ester-free organic phosphate acid that is compatible with anionic and nonionic surfactants. As potentially explosive mixtures are formed when concentrated oxidizing or reducing agents are mixed with organic compounds, T-Mulz® 1183 should not be mixed with these compounds. This product is recommended for use in emulsion polymerization.

T-Mulz® WAM is a blend of surfactants designed to increase the penetration of water and other nutrients into hard-to-wet soils. It eliminates localized dry spots and can increase plant growth in all types of media. The usage rates depend on local water hardness and are generally 3 - 4 ounces per gallon of water.

T-Det® N 9.5 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 9.5 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state and are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

T-Det® LF 505 is a low-foaming nonionic surfactant that is soluble in water at temperatures below its cloud point. Additionally, it is soluble in polar solvents such as alcohols and glycol ethers, as well as in aromatic solvents like xylene, toluene, and benzene. It is designed for low-foaming applications such as rinse aids, metal cleaners, cold phosphate cleaners, and hard surface cleaners.

T-Mulz® T9PE is a phosphate ester designed for use in alkaline formulations and hard surface cleaners. It may also be used in concentrated electrolyte solutions to improve salt tolerance. This product also functions as a hydrotrope and is capable of coupling silicates, phosphates, and carbonates into alkaline mixtures. The added benefits of this product are that it provides detergency and improved wetting power to the formulation. It finds application in agricultural tank mix additives as fertilizer-water conditioner formulations.

T-Det® N 7 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 7 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state. They are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

T-Det® CAM 7.5 is an ethoxylated product based on cocoamine. It is primarily used as a nonionic surfactant in various industrial and domestic formulations. It is also used as a cleaning agent, antistatic agent, dispersant, emulsifier in textile formulations, corrosion inhibitor in metals, etc.

Antifoam 10 Industrial Grade, belonging to the silicone chemical family, functions as an anti-foaming agent and defoamer. It features cost-effectiveness, defoaming properties, easy-to-dilute formulation, fast-acting action, good dispersion properties, and minimization of foaming. Also known as dimethicone.

Antifoam 8830 Industrial Grade is a 30% active emulsion of polydimethylsiloxane formulated to control foam in industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficien

T-Det® LF 460 is a slightly more hydrophilic version of T-Det® LF 416. This product is more alkali-compatible and requires less hydrotrope to produce a single-phase formulation. It is a 100% active alkoxylated alcohol that produces negligible amounts of foam while retaining excellent wetting power. This product functions well in rinse aid formulas and finds use in mechanical dishwashing and bottle-washing applications. It is also well suited to colder environments for storage, where a low set point is required. The favorable foam profile may be improved further by the addition of small amounts of T-Det® 1618 DI 302.

T-Det® N 14 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 14 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic surfactants and it is stable in the presence of acids, bases, and salts.

T-Det® CAM 2 is an ethoxylated product based on cocoamine. This product is primarily used as a nonionic surfactant in various industrial and domestic formulations. Additionally, it can also be used as a cleaning agent, antistatic agent, dispersant, or emulsifier in textile formulations, a corrosion inhibitor in metals, and an emulsifier in various applications.

T-Det® CAM 5 is an ethoxylated product based on cocoamine. It is primarily used as a nonionic surfactant in various industrial and domestic formulations. This product also serves as a cleaning agent, antistatic agent, dispersant, or emulsifier in textile formulations, as well as a corrosion inhibitor in metals and emulsifiers.

T-Mulz® HODE is a paraffinic oil emulsifier used in dormant oil sprays applied to orchard crops and as a component in lipophilic pesticide blends. It is OMRI-listed and can be used in organic crop production.

Antifoam 8810 Industrial Grade is a 10% active emulsion of polydimethylsiloxane formulated to control foam in industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficien

Antifoam 100 Industrial Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It is primarily used in non-aqueous industrial appli

T-Det® N 8 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 8 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state. They are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

T-Mulz® DOE is a dormant oil emulsifier that is recommended for use in dormant-paraffinic spray oils, including herbicide, orchard, and deciduous spray oils. This clear amber liquid is used in agrochemical applications and has a flash point of at least 500°F.

T-Mulz® 1237 is a proprietary emulsifier that is developed to make a microemulsion system. This clear amber liquid is used as a cleaning ingredient and has a flash point and pour point of 240°F and approximately 40°F, respectively. The 1% aqueous solution of this product has a pH of 5.0 - 6.4.

T-Mulz® 1227 is an alcohol-based phosphate ester designed for use as a hydrotrope that provides detergency, coupling, and improved salt tolerance in alkaline cleaners, yarn lubricants, and concentrated electrolyte solutions. This product is especially effective in removing heavier soils. It has a very fast Draves wetting time, which can enhance the wetting performance of the finished formulation.

T-Det® N 5 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 5 moles of ethylene oxide. This product is regarded as non-hazardous, however, it is considered to possess low acute oral and skin penetration and should not be used in products for internal use. It appears as a colorless, clear liquid.

Antifoam 8810 Food Grade is a 10% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It

T-Mulz® COE-APF is a specially developed APE-free emulsifier for use in concentrated agricultural crop oil formulations. When combined with suitable crop oils, this emulsifier is designed to enhance the performance of herbicides. The 40% crop oil concentrate containing T-Mulz® COE-APF as the emulsifier demonstrates superior emulsion performance and cold stability.

T-Mulz® D6PE is a phosphate ester designed for use in alkaline formulations and hard surface cleaners. It may also be used in concentrated electrolyte solutions to improve salt tolerance. This product functions as a hydrotrope and is capable of coupling silicates, phosphates, and carbonates into alkaline mixtures. The added benefits of this product are that it provides detergency and improved wetting power to the formulation.

Antifoam 8805 Food Grade is an emulsion designed to function as an anti-foaming agent in food ingredients and a defoamer in agrochemical applications. This product effectively reduces foam, ensuring smooth processing and high-quality end products. Ideal for various formulations, Antifoam 8805 maintains performance consistency and complies with food-grade standards, making it a reliable choice for industries requiring efficient foam control.

T-Mulz® 734-2 KS is the potassium salt of an organic phosphate ester that is designed for use in alkaline cleaners and concentrated electrolyte solutions. It improves salt tolerance and functions as a hydrotrope. This product serves as a coupling agent in conjunction with other surfactants to clarify formulations that might otherwise be inhomogeneous. It also has the ability to improve a formula€™s wetting ability and detergency.

T-Det® LF 416 is a low-foaming, nonionic surfactant that is soluble in water at temperatures below its cloud point. It is also soluble in polar solvents such as alcohols and glycol ethers, as well as in aromatic solvents like xylene, toluene, and benzene. This surfactant is designed for low-foaming applications, including rinse aids, metal cleaners, cold phosphate cleaners, and hard surface cleaners.

T-Det® N 10.5 is an anhydrous liquid nonionic surface-active agent that is produced by reacting nonylphenol with 10.5 moles of ethylene oxide. It is a clear liquid that is compatible with anionic surfactants and stable in the presence of acids, bases, and salts.

T-Mulz® 800 is an alcohol ethoxylate-based phosphate ester designed for use in alkaline cleaners, yarn lubricants, and concentrated electrolyte solutions. This product is compatible with anionic and nonionic surfactants. It provides improved salt tolerance, functions as a hydrotrope, and gives excellent detergency, wetting, and coupling.

T-Det® XH is a polyalkalene glycol monobutyl ether surface active agent primarily used as an emulsifier and dispersing agent in a variety of industrial applications. It can be used as a pigment, paper coating, and polymer dispersant, as well as a binder and surfactant in powdered products due to its high freeze point. Additionally, it is classified as an intermediate in the manufacturing of iodophors for germicidal cleaners.

Antifoam 100 Food Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It can be used in the manufacture of food packaging materi

T-Mulz® 598 is a blended anionic surfactant used in the production of emulsifier systems for agricultural and industrial applications. This product improves wetting and has good compatibility and emulsifying properties. It is a clear to yellow liquid that is compatible with both anionic and nonionic surfactants.

T-Det® N 20 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 20 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic surfactants and it is stable in the presence of acids, bases, and salts.

T-Mulz® AG 525 is a liquid emulsifier for agrochemical applications, specifically designed for agricultural pest control.

T-Mulz® D6PE-KS is an alcohol-based phosphate ester potassium salt. This product is designed to condition and buffer the water used in pesticide spray solutions. It may also improve hard-water tolerance. The added benefits of this product include improved wetting and spreading of spray solutions.