Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- Technologies
- Product Families
- Composition
- PRINCIPAL FUNCTIONING AGENTS:
- Polyhydroxycarboxylic acids, sulfates, and polymeric deposition agents - 35.0%
- Constituents ineffective as a spray adjuvant - 65.0%
- TOTAL - 100.0%
Features & Benefits
- Agrochemicals Features
- Product Highlights
- Enhanced wetting and spreading
- Provides a more uniform spray
- General Information
- ACCUQUEST® WM is a unique blend of polymers, water conditioners, sequestrants, and ammonium salts designed to increase pesticide deposition onto foliage and enhance the performance of pesticides. ACCUQUEST® WM also contains polymeric sequestrants and chelating agents which tie up hard water cations, thus preventing them from deactivating some herbicides. The forms of ammonia ion in ACCUQUEST® WM have been recognized as effective enhancers of pesticide uptake by some plant species. ACCUQUEST® WMphysically modifies the deposition characteristics of the spray solution. As a result of these properties, ACCUQUEST® WM can improve pesticide spray application and efficacy. ACCUQUEST® WM does not contain buffering agents or surfactants and is compatible with sulfonylurea herbicides. Unlike many drift control agents, ACCUQUEST® WM is compatible with glyphosate and sulfosate formulations and ionic herbicides such as paraquat.
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Directions for Use
- ACCUQUEST® MAY BE USED WITH PRODUCTS DESIGNED FOR THE FOLLOWING APPLICATIONS: AGRICULTURAL, AQUATIC, FORESTRY, INDUSTRIAL, NON-CROPLAND, ORNAMENTAL, RIGHTS-OF-WAY, TURF, AND OTHERS.
- USE RATES: Use 2-4 quarts per 100 gallons.
- Mixing Guidelines
- Prior to any pesticide or fertilizer application all spray mixing equipment must be cleaned. Carefully observe all cleaning directions on the pesticide label. ACCUQUEST® WM should never be mixed undiluted with any pesticides. To maximize effect of sequestering metal ions, add ACCUQUEST® WM to the spray solution prior to the addition of pesticides which may be adversely affected by hard water. IMPORTANT: Always add ACCUQUEST® WM as the first component of a spray tank mixture before other additives or pesticides. This may be different than the mixing order for conventional drift control additives. Fill the spray or mix tank one third to one half full of water and begin agitation. Slowly add the recommended amount of ACCUQUEST® WM and mix until product is completely dissolved. Continue agitation and filling with water while adding pesticides and/or fertilizers as directed by labeling or in the following sequence:
- Compatibility agents
- Dry flowables or water dispersible granules
- Wettable powders
- Flowables
- Water based solutions
- Emulsifiable concentrates
- Spray adjuvants
- Other
- Terminology on this label is consistent with definitions approved by Subcommittee E-35.22 on Pesticide Formulations and Application Systems under the jurisdiction of ASTM Subcommittee E-35.
Properties
- Formulation Type
- Physical Form
Safety & Health
- Precautionary Statements
- BEFORE USING THIS PRODUCT, READ ALL PRECAUTIONS, Directions for Use, CONDITIONS OF SALE–LIMITED WARRANTY AND LIMITATIONS OF LIABILITY AND REMEDIES.
- Hazards to Humans and Domestic Animals
- May be harmful if swallowed. May be harmful in contact with skin. Causes eye irritation. Causes mild skin irritation. May be harmful if inhaled. Keep product locked up and out of the reach of children. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum or smoking tobacco. Remove and wash contaminated clothing before reuse. Do not take internally. Avoid contact with or inhalation of spray application mist if present. Do not apply this product in such a manner as to directly expose workers or other persons. If product is being mixed with pesticides and/or spray adjuvants, follow all Precautionary Statements on the accompanying product(s) labeling. Not for human or animal consumption.
- Personal Protective Equipment (PPE)
- Wear protective eyewear (goggles or face shield), chemical-resistant gloves, long-sleeved shirt and long pants, and shoes plus socks. Do not smoke, drink, or eat while using this product. Take off any contaminated clothing and wash before reuse.
Storage & Handling
- Storage and Disposal
- Do not contaminate water, food, or feed by Storage and Disposal. Dispose of empty containers by triple rinsing (or equivalent) with water and pouring rinsate into spray tank. Recycle rinsed containers whenever possible or puncture and discard empty containers in a landfill in accordance with current local, state, International and federal regulations.
- STORAGE: Store in original container only. Keep container tightly closed. Do not allow water to be introduced into the contents of this container. Do not contaminate water sources by runoff from cleaning of equipment, disposal of equipment washwaters or spray waste. Do not store near heat or open flame.
- NON-REFILLABLE CONTAINER DISPOSAL: Do not reuse empty container. Triple rinse (or equivalent) during mixing and loading and add rinsate to spray tank. Recycling decontaminated containers is the best option of container disposal. The Agricultural Container Recycling Council (ACRC) operates the national recycling program. To contact your state and local ACRC recycler visit the ACRC web page at www.acrecycle.org. Decontaminated containers may also be disposed of in a sanitary landfill. For help in chemical emergencies involving spill, leak, fire or exposure, call toll free 1-800-424-9300.
- REFILLABLE CONTAINER: Refill this container with adjuvants only. Do not reuse this container for any other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from the container into application equipment or mix tank. Fill the container about 10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. If the container is not being refilled, return the container to the point of purchase.