Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Agrochemical Functions
- Technologies
- Product Families
- Composition
- PRINCIPAL FUNCTIONING AGENTS:
- Proprietary blend of Alkyl Aryl Polyethoxy Ethanol Phosphates and Organic Phosphatic Acids - 50.00%
- Components ineffective as a spray adjuvan - 50.00%
- TOTAL - 100.00%
Features & Benefits
- Product Highlights
- Superior crop safety
- Extensively researched for over 30 years
- Consistent performance
- High yield potential
- Excellent efficacy
- Flowable products can be used for impregnation of dry fertilizer allowing:Better soil coverage and application uniformityFast root absorption
- Better soil coverage and application uniformity
- Fast root absorption
- General Information
- BUFFER XTRA STRENGTH is a buffering and conditioning agent designed to adjust the pH of alkaline waters, minimize hydrolysis of pesticides which tend to decompose in alkaline spray solutions, and to condition spray water. BUFFER XTRA STRENGTH also has the properties of a wetter/spreader surfactant and compatibility agent. BUFFER XTRA STRENGTH can positively affect pesticide spray application and pesticide efficacy. BUFFER XTRA STRENGTH is classified as an anionic spray adjuvant.
- BUFFER XTRA STRENGTH is a buffering and conditioning agent designed to adjust the pH of alkaline waters, minimize hydrolysis of pesticides which tend to decompose in alkaline spray solutions, and to condition spray water. BUFFER XTRA STRENGTH also has the properties of a wetter/spreader surfactant and compatibility agent. BUFFER XTRA STRENGTH can positively affect pesticide spray application and pesticide efficacy. BUFFER XTRA STRENGTH is classified as an anionic spray adjuvant.
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Directions for Use
- MPORTANT: Read these entire Directions and Conditions of Sale, including the Warranty and Limitation of Damages provision, before using
- FOR USE WITH PRODUCTS REGISTERED FOR: AGRICULTURAL, AQUATIC, FORESTRY, INDUSTRIAL, MUNICIPAL, NON-CROPLAND, ORNAMENTAL, RIGHTS-OF-WAY, TURF AND OTHER USES.
- Use 4 oz. to 2 pints of BUFFER XTRA STRENGTH per 100 gallons of water to lower and stabilize the pH of the spray solution. The rates of BUFFER XTRA STRENGTH may vary with water conditions and will depend upon the alkalinity of the water used or the presence of other products in the spray mix. The use of a pH measuring device is recommended for determining the optimum rate of BUFFER XTRA STRENGTH. Final spray solution pH for many pesticides should be in the 4-7 range.
- Note: Spray mixes containing fixed copper (products such as cupric hydroxide, tribasic copper or copper oxychloride) should not be buffered below a pH of 5.0.
- Method of Addition
- Prior to any pesticide application, all spray mixing and application equipment must be clean. Carefully observe all cleaning directions on the pesticide label.BUFFER XTRA STRENGTH should be added to the water in the spray tank with good agitation prior to mixing the pesticide. Do not mix BUFFER XTRA STRENGTH with undiluted pesticides.
- NOTICE: These Directions for Use do not constitute a recommendation to use any product in any manner contrary to the directions of the manufacturer. Follow directions carefully. Timing and method of application, weather and crop conditions and other influencing factors in the use of this product are beyond the control of the Seller. Buyer assumes all risks of use, storage or handling of this material not in strict accordance with directions given herewith
Properties
- Physical Form
Safety & Health
- Precautionary Statements
- BEFORE USING THIS PRODUCT, READ ALL PRECAUTIONS, Directions for Use, CONDITIONS OF SALE–LIMITED WARRANTY AND LIMITATIONS OF LIABILITY AND REMEDIES.
- Hazards to Humans and Domestic Animals
- Harmful if swallowed. May be harmful in contact with skin. Causes severe skin burns and eye damage. May be harmful if inhaled. Keep product locked up and out of the reach of children. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum or smoking tobacco. Remove and wash contaminated clothing before reuse. Do not take internally. Avoid contact with or inhalation of spray application mist if present. Do not apply this product in such a manner as to directly expose workers or other persons. If product is being mixed with pesticides and/or spray adjuvants, follow all Precautionary Statements on the accompanying product(s) labeling. Not for human or animal consumption
- Personal Protective Equipment (PPE)
- Wear protective eyewear (goggles or face shield), chemical-resistant gloves, long-sleeved shirt and long pants, and shoes plus socks when using this product. Take off any contaminated clothing and wash before reuse.
Storage & Handling
- Storage and Disposal
- Store in original container only. Keep container tightly closed, do not allow water to be introduced into the contents of this container.
- Do not contaminate water sources by runoff from cleaning of equipment, disposal of equipment washwaters or spray waste. Do not store near heat or open flame. Do not store with oxidizing agents.
- CONTAINER DISPOSAL: Triple rinse (or equivalent) and add rinsate to spray tank, then offer for recycling or reconditioning, or puncture and dispose of according to state and local authorities. If burned, stay out of smoke.