Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- Technologies
- Product Families
- Composition
- Dialkyl dimethyl ammonium polynaphthyl amine - 24.00%
- Polyethoxylated alkyl (c6-c22) aryl ethers - 56.00%
- Components ineffective as spray adjuvant - 20.00%
- TOTAL - 100.00%
Features & Benefits
- Agrochemicals Features
- Product Highlights
- Excellent spreading, deposition and penetration
- Reduces wash-off
- Film-free sticker
- Pest surface activity improves ai absorption
- Excellent plant safety
- General Information
- HYPER-ACTIVE® is a spray adjuvant designed to specifically enhance the activity of insecticides, fungicides, and miticides by improving the deposition, retention, and wetting of spray application mixtures that contain them. These spray coverage and deposition improvements are applicable to both plant and pest surfaces. When used at recommended rates, HYPER-ACTIVE®can positively affect pesticide spray application and pesticide efficacy. Optimum application effects, however, can be influenced by the crop, pest, spray equipment, spray volume, pressure, droplet size, spray mixture, and environmental factors. Consequently, it is recommended that careful observations of the spray deposit be made and adjuvant concentration adjusted accordingly.
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Directions for Use
- FOR USE WITH INSECTICIDES, FUNGICIDES AND MITICIDES REGISTERED FOR: AGRICULTURAL, FORESTRY, INDUSTRIAL, MUNICIPAL, ORNAMENTAL, RIGHTS-OF-WAY, TURF, NON-CROPLAND, AND OTHER USES.
- In all applications of HYPER-ACTIVE®, read and follow directions on the pesticide(s) label(s) as to procedures, dosage rates, timing of applications, and restrictions for the crop on which the pesticide is to be applied. HYPER-ACTIVE® can increase the activity of some pesticides.
- The addition of an adjuvant to some pesticides or pesticide tank mix combinations may cause phytotoxicity to the foliage and/or fruit of susceptible crops. Prior to the addition of HYPER-ACTIVE®to spray mixes, the user or application advisor must have experience with the combination or must have conducted a phytotoxicity trial or must take the recommendations from the labels of products to be tank mixed. The use of test areas is recommended when applying during periods of high humidity or high temperature or to other situations where field experience is limited.
- HYPER-ACTIVE®may be applied by ground, Controlled Droplet Applicators (CDA), or aerial spray equipment. For most applications, use enough HYPER-ACTIVE®to allow for uniform wetting and deposition of the spray onto leaf surfaces without undue runoff. GROUND (Dilute & Concentrate), AERIAL, CDA: Use 1 to 2 pints per 100 gallons of spray (0.125-0.25% v/v).
- NOTE: The above use recommendations are considered to be adequate for most uses. Some fungicides, insecticides, and miticides, however, may recommend or require higher or lower rates for optimum effect. Follow the pesticide(s) label(s) directions when this occurs.
- Mixing Guidelines
Prior to any pesticide application, all spray mixing and application equipment must be thoroughly cleaned. Carefully observe all cleaning directions on the pesticide(s) label(s).
- Fill spray tank one-half full with water and begin agitation.
- Add pesticides and/or fertilizers as directed by manufacturer's label or in the following sequence:
- Micronutrients and fertilizers
- Dry flowables or water dispersible granules
- Flowable
- Water soluble pesticides
- Emulsifiable concentrates
- Continue agitation and complete filling of the spray tank.
- Add HYPER-ACTIVE® last and continue agitation.
Do not mix HYPER-ACTIVE® with undiluted pesticides.
Properties
- Formulation Type
- Physical Form
Safety & Health
- Hazards to Humans and Domestic Animals
- BEFORE USING THIS PRODUCT, READ ALL PRECAUTIONS, Directions for Use, CONDITIONS OF SALE–LIMITED WARRANTY AND LIMITATIONS OF LIABILITY AND REMEDIES.
- May be harmful if swallowed. May be harmful in contact with skin. Causes serious eye damage. Causes mild skin irritation. May be harmful if inhaled. Highly flammable liquid and vapor. Keep away from heat/sparks/open flames/hot surfaces. No Smoking. Keep container tightly closed. Keep product locked up and out of the reach of children. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum or smoking tobacco. Remove and wash contaminated clothing before reuse. Do not take internally. Avoid contact with or inhalation of spray application mist if present. Do not apply this product in such a manner as to directly expose workers or other persons. If product is being mixed with pesticides and/or spray adjuvants, follow all Precautionary Statements on the accompanying product(s) labeling. Not for human or animal consumption.
- Personal Protective Equipment (PPE)
- Wear protective eyewear (goggles or face shield), chemical-resistant gloves, long-sleeved shirt and long pants, and shoes plus socks when using this product. Take off any contaminated clothing and wash before reuse
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage and Disposal
- Do not contaminate water, food or feed by storage or disposal.
- STORAGE: Store in original container only in a well-ventilated place. Keep cool.Keep container tightly closed. Do not allow water to be introduced into the contents of this container. Do not store near heat or open flame. Do not store with oxidizing agents.
- PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be dispersed of on site or at an approved waste disposal facility. Do not contaminate water sources by runoff from cleaning of equipment, disposal of equipment washwaters, or spray waste.
- CONTAINER DISPOSAL: Triple rinse (or equivalent). Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke.