Helena Agri-Enterprises InterActive

Helena Agri-Enterprises InterActive is a combination of translocating surfactants, wetting agents and ammonium salts designed to enhance the efficacy of herbicides. Interactive also contains sequestrants and de-foaming agents to improve spray application.

Chemical Family: Ammonium Compounds

Functions: Buffers & pH Stabilizer, Defoamer, Surfactant, Water Conditioner, Wetting Agent

Application Technique: Aerial Application, Ground Soil Applied, Sprayers

Formulation Type: Concentrate Solutions

Similar Products

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
Technologies
Composition

ACTIVE INGREDIENTS  

  1. Proprietary blend of ammonia salts, cationic and anionic surfactants,dimethyl polysiloxane and salts of polyacrylic acid   -  43.0%
  2. INERT INGREDIENTS -  57.0%
  • TOTAL -  100.0%

Features & Benefits

Product Highlights
  • Improves spreading, wetting and translocation
  • Enhances herbicide uptake
  • Ammonium sulfate replacement
  • Contains anti-foaming agents
  • Low use rates
  • Neutral pH
  • Effective with most herbicides
  • Contains additional water conditioners
General Information
  • INTERACTIVE®is a combination of translocators, wetting agents and ammonium saltsdesigned to enhance the efficacy of pesticides. INTERACTIVE®also contains sequesterantsand defoaming agents to prevent spray application problems due to water quality and foam-ing.
  • NTERACTIVE®is particularly effective with herbicide products containing glyphosate.
  • INTERACTIVE®is formulated with specialized ammonium nitrogen. Ammoniacal nitrogen hasbeen recognized as an effective enhancer of pesticide uptake by some plant species. INTER-ACTIVE®may be used to replace or supplement the use of ammonium sulfate and othernitrogen fertilizers that are recommended as adjuvants for pesticide applications. INTERAC-TIVE®may also be used as a substitute for oil based products where crop injury is a concern.INTERACTIVE®can effectively enhance the performance and application of pesticide andplant nutritional products

Applications & Uses

Applicable Crop
Directions for Use
  • FOR USE WITH PRODUCTS REGISTERED FOR: AGRICULTURAL, FORESTRY, INDUS-TRIAL, MUNICIPAL, ORNAMENTAL, RIGHTS-OF-WAY, TURF, NON-CROPLAND ANDOTHER USES.
  • In all applications of INTERACTIVE®, read and follow the directions on the pesticide(s) labelas to procedures, dosage rates, timing of application and restrictions for the crop on which thepesticide is to be applied. INTERACTIVE®can increase the activity of some pesticides. Theuse of a test area is recommended when applying during periods of high humidity, high tem-peratures or other situations where field experience is limited. The addition of an adjuvant tosome pesticides, crop nutritionals and other spray mix combinations may cause phytotoxicityto the foliage and/or fruit of susceptible crops. Prior to the addition of INTERACTIVE®to anyspray mix, the user or application advisor must have experience with the combination or musthave conducted a phytotoxicity trial or must take the recommendations from the labels of theproducts with which it is to be mixed.
  • GROUND:Apply at the rate of 4 to 8 pints per 100 gallons of water or 0.5 to 1.0% by volume.A minimum of 8 pints per 100 gallons or 1% by volume is recommended for glyphosateproducts that contain no adjuvants.AERIAL, LOW VOLUME, CDA:Use 6 – 8 fluid oz. in 1 – 20 gallons of water per acre
Mixing Guidelines

Prior to any pesticide application all spray mixing and application equipment must be cleaned. Carefully observe all cleaning directions of the pesticide(s) label(s).

  • Fill spray tank one-half full with water and begin agitation.
  • Add INTERACTIVE®
  • Add pesticides and/or fertilizers as directed by manufacturer’s label or in the following sequence
  1. Dry flowables or water dispersible granules.
  2. Wettable powders
  3. Flowables
  4. Solutions
  5. Emulsifiable concentrates
  6. Micronutrients and fertilizers
  • Continue agitation and complete filling of spray tank.
  • Do not mix INTERACTIVE®with undiluted pesticides.
  • Terminology on this label is consistent with the definitions approved by subcommittee E-35.22on Pesticide Formulations and Application Systems under the jurisdiction of ASTM Subcom-mittee E-35.

Properties

Formulation Type
Physical Form

Safety & Health

Hazards to Humans and Domestic Animals
  • BEFORE USING THIS PRODUCT, READ ALL PRECAUTIONS, Directions for Use,CONDITIONS OF SALE – LIMITED WARRANTY AND LIMITATIONS OF LIABILITY ANDREMEDIES
  • Harmful if swallowed. May be harmful in contact with skin. Causes serious eye irritation.Causes skin irritation. May be harmful if inhaled. Keep product locked up and out of the reachof children. Wash thoroughly with soap and water after handling and before eating, drinking,chewing gum or smoking tobacco. Remove and wash contaminated clothing before reuse. Donot take internally. Avoid contact with or inhalation of spray application mist if present. Do notapply this product in such a manner as to directly expose workers or other persons. If productis being mixed with pesticides and/or spray adjuvants, follow all Precautionary Statements onthe accompanying product(s) labeling. Not for human or animal consumption
Personal Protective Equipment (PPE)
  • Wear protective eyewear (goggles or face shield),chemical-resistant gloves, long-sleeved shirt and long pants, and shoes plus socks whenusing this product. Take off any contaminated clothing and wash before reuse.

Packaging & Availability

Packaging Type

Storage & Handling

Storage and Disposal
  • Keep container tightly closed. May be stored in unheated area, but keep from freezing.
  • Do not contaminate water sources by cleaning of equipment or disposal of rinse-water.
  • Dispose of empty containers by triple rinsing (or equivalent) with water and pouring rinsateinto spray tank. Recycle rinsed containers whenever possible or puncture and discardempty containers in a landfill in accordance with current local, state, International and fed-eral regulations. For help in chemical emergencies involving spill, leak, fire or exposure, calltoll free 1-800-424-9300