Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Hexcel
All Hexcel
Search products
Matching Product Categories
Composite Materials
Markets
Physical Form
All Filters
32 Products found on Hexcel
Most Viewed
TDS
With TDS
Hexcel F161
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing
F161 is a structural, heat resistant and electrical grade epoxy formulation designed for autoclave curing. F161 is a high temperature, laminate grade epoxy resin with a 350°F (177°C) cure. F161 is unique in that it was the first resin system to meet all types and classes of MIL-R-9300 B.
HexPly® M76
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Compression Molding, Prepreg Processing
HexPly® M76 is a versatile curing toughened epoxy resin that can be cured from 275ºF (135ºC) to 350ºF (177ºC), depending on service temperature requirements. HexPly® M76 is formulated for lower temperature autoclave or press mold processing. The recommended lay-up procedure for HexPly® M76 is HSP-L4. The recommended cure procedures are HSP-C5 (275ºF) or HSP-C1 (350ºF).
HexTow® AS4
Applications:
Equipment & Parts, Renewable Energy, Refining & Gas Processing
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Tanks
HexTow® AS4 carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 3,000 (3K), 6,000 (6K) and 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties, and is suggested for use in weaving, prepregging, filament winding, braiding, and pultrusion. AS4-GP 3k (1%), AS4-GP 12k (0.9%), and AS4 12k carbon fibers have been qualified to NMS 818 Carbon Fiber Specification (NCAMP). This allows customers to call out an industry standard, aerospace grade carbon fiber without the need to write and maintain their own specification.
HexPly® M65
Polymer Name:
Thermoset Polyimide (PI)
Functions:
Prepreg
Processing Methods:
Prepreg Processing
HexPly® M65 is a bismaleimide resin that cures via an addition reaction in a toughened two-phase thermoset matrix with no condensation by-products. HexPly® M65 is a controlled bimaleimide resin system designed for alternative processing capabilities such as co-curing over honeycomb core, compression molding, as well as standard autoclave processing. HexPly® M65 has improved tack levels and performs well for fiber placement applications.
HexTow® IM2A
Applications:
Equipment & Parts, Renewable Energy, Refining & Gas Processing
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Tanks
HexTow® IM2A carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in prepregging, filament winding, braiding, and pultrusion. The unique properties of HexTow® IM2A fiber, such as higher tensile strength and modulus, as well as good shear strength, allow structural designers to achieve both higher safety margins for both stiffness and strength critical applications. HexTow® IM2A is International Monohull Open Class Association (IMOCA) certified/qualified.
HexTow® IM7
Applications:
Equipment & Parts, Renewable Energy, Refining & Gas Processing
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Tanks
HexTow® IM7 carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in weaving, prepregging, filament winding, braiding, and pultrusion. The unique properties of HexTow® IM7 fiber, such as higher tensile strength and modulus, as well as good shear strength, allow structural designers to achieve both higher safety margins for both stiffness and strength critical applications. IM7-G 12K (0.25%) carbon fiber has been qualified to NMS 818 Carbon Fiber Specification (NCAMP). This allows customers to call out an industry standard, aerospace grade carbon fiber without the need to write and maintain their own specification.
HexTow® IM2C
Applications:
Equipment & Parts, Renewable Energy, Refining & Gas Processing
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Tanks
HexTow® IM2C carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in prepregging, filament winding, braiding, and pultrusion. The unique properties of HexTow® IM2C fiber, such as higher tensile strength and modulus, as well as good shear strength, allow structural designers to achieve both higher safety margins for both stiffness and strength critical applications. HexTow® IM2C is International Monohull Open Class Association (IMOCA) certified/qualified.
HexTow® IM6
Applications:
Equipment & Parts, Renewable Energy, Refining & Gas Processing
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Tanks
HexTow® IM6 carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in prepregging, filament winding, braiding, and pultrusion. The unique properties of HexTow® IM6 fiber, such as higher tensile strength and modulus, as well as good shear strength, allow structural designers to achieve both higher safety margins for both stiffness and strength critical applications.
HexTow® IM10
Applications:
Equipment & Parts, Renewable Energy, Refining & Gas Processing
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Tanks
HexTow® IM10 carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in weaving, prepregging, filament winding, braiding, and pultrusion. The unique properties of HexTow® IM10 fiber, such as the highest commercially available tensile strength, intermediate modulus, and good shear strength allow structural designers to achieve higher safety margins for both stiffness and strength critical applications
HexPly® 954-2A
Polymer Name:
Cyanate Ester Resin
Functions:
Prepreg
Processing Methods:
Compression Molding, Prepreg Processing
HexPly® 954-2A is a 350ºF (177ºC) curing toughened cyanate resin with low moisture absorption, and excellent microcracking resistance. HexPly® 954-2A is formulated for autoclave or press molding. Recommended cure is two hours at 350ºF (177ºC). The recommended lay-up procedure is HSP-L3. The recommended cure procedure is HSP-C1 or HSP-C3. Typical applications for HexPly® 954-2A include primary and secondary aircraft structure, space structures, cryogenic tanks, or any application where impact resistance, light weight and excellent dielectric properties are required. HexPly® 945-2A can be impregnated via hot melt or solution techniques on all available fibers and fabrics.
HexPly® F652
Polymer Name:
Thermoset Polyimide (PI)
Functions:
Prepreg
Processing Methods:
Prepreg Processing
HexPly® F652 is a bismaleimide resin that cures via an addition reaction with no condensation by-products. HexPly® F652 is a controlled flow polyimide resin system designed for alternative processing capabilities such as co-curing over honeycomb core, compression molding, as well as standard autoclave processing.
HexTow® HM50
Applications:
Equipment & Parts, Renewable Energy, Refining & Gas Processing
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Tanks
HexTow® HM50 carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties, and is suggested for use in prepregging, filament winding, braiding, and pultrusion. Data and information shown are preliminary
HexPly® F655
Polymer Name:
Thermoset Polyimide (PI)
Functions:
Prepreg
Processing Methods:
Prepreg Processing
HexPly® F655™ is a bismaleimide resin that cures via an addition reaction in a toughened two-phase thermoset matrix with no condensation by-products. HexPly® F655™ is a controlled flow polyimide resin system designed for alternative processing capabilities such as co-curing over honeycomb core, compression molding, as well as standard autoclave processing.
HexPly® 954-3
Polymer Name:
Cyanate Ester Resin
Functions:
Prepreg
Processing Methods:
Compression Molding, Prepreg Processing
HexPly® 954-3 is a 350ºF (177ºC) curing cyanate resin with excellent resistance to moisture absorption, outgassing and microcracking. HexPly® 954-3 is formulated for autoclave or press molding using a standard cure of two hours at 350ºF (177ºC). Glass transition temperature can be maximized by post curing at 450ºF (232ºC). The recommended lay-up procedure is HSP-L3. The recommended cure procedure is HSP-C1 or HSP-C2.
HexPly® M56
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing
HexPly® M56 is a high performance epoxy matrix developed for out-of-autoclave curing of composite aircraft structures.
HexPly® 954-3A
Polymer Name:
Cyanate Ester Resin
Functions:
Prepreg
Processing Methods:
Prepreg Processing
HexPly® 954-3A is a 350ºF (177ºC) curing cyanate resin with a 400ºF (204ºC) glass transition temperature. Standard cure is two hours at 350ºF (177ºC). Glass transition temperatures can be maximized by a free-standing post cure at 450ºF (232ºC). HexPly® 954-3A is a controlled flow cyanate resin designed for autoclave and vacuum bag curing. HexPly® 954-3A can be impregnated on all available fibers and fabrics. The recommended lay-up procedure for HexPly® 954-3A is HSP-L3. The recommended cure procedure is HSP-C1. Typical applications for HexPly® 954-3A are primary and secondary space structures where dimensional stability and low moisture absorption are required.
HexPly® M73
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Compression Molding, Prepreg Processing
HexPly® M73 is a 350°F (177°C) curing toughened resin with 350°F (177°C) dry and 270°F (132°C) wet service capabilities. HexPly® M73 is formulated for autoclave or press molding and can be cured at 350°F for six hours. A two-hour cure at 350°F with two-hour post-cure at 390°F may also be used. Unidirectional tape and woven fabric impregnated with HexPly® M73 resin will retain tack for 10 or more days at room temperature.
HexTow® AS4D (Aerospace)
Applications:
Equipment & Parts, Renewable Energy, Refining & Gas Processing
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Tanks
HexTow® AS4D carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties, and is suggested for use in prepregging, filament winding, braiding, and pultrusion
HexPly® 996
Polymer Name:
Siloxane Polymer
Functions:
Prepreg
Processing Methods:
Prepreg Processing
HexPly® 996 is a 350ºF (177ºC) curing cyanate siloxane resin with a 330ºF (165ºC) glass transition temperature. Standard cure is two hours at 350ºF (177ºC). HexPly® 996 can be autoclave and press cured. HexPly® 996 can be impregnated on all available fibers and fabrics. The recommended lay-up procedure for HexPly® 996 is HSP-L3. The recommended cure procedure is HSP-C1 or HSP-C6. Typical applications for HexPly® 996 are primary and secondary space structures where the optimum dimensional stability and lowest moisture absorption are required.
HexPly® M20
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing
HexPly® M20 is an epoxy structural prepreg, designed to provide high temperature performance combined with a low energy cure cycle. Due to its processing flexibility (vacuum bag or autoclave) it is ideally suitable for composite repair. HexPly® M20 cures at 130°C (265°F) to form a tough, high temperature resistant fibrereinforced composite. HexPly® M20 has been chosen as a standardized repair material by the Commercial Aircraft Composite Repair Committee (CACRC) which sets global aerospace standards for composite repair. HexPly® M20 is available as woven carbon and UD carbon tape for structural repairs. The pre-impregnated woven glass version is used for non-structural galvanic corrosion protection.
HexTow® AS4C (Aerospace)
Applications:
Equipment & Parts, Renewable Energy, Refining & Gas Processing
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Tanks
HexTow® AS4C carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 3,000 (3K), 6,000 (6K) and 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties, and is suggested for use in weaving, prepregging, filament winding, braiding, and pultrusion.
HexTow® AS7 (Aerospace)
Applications:
Equipment & Parts, Renewable Energy, Refining & Gas Processing
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Tanks
HexTow® AS7 carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties, and is suggested for use in weaving, prepregging, filament winding, braiding, and pultrusion. AS7-GS 12k (0.5%) carbon fiber has been qualified to NMS 818 Carbon Fiber Specification (NCAMP). This allows customers to call out an industry standard, aerospace grade carbon fiber without the need to write and maintain their own specification.
HexPly® M74
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Compression Molding, Prepreg Processing
M74 is a high flow, 350°F (177°C) curing epoxy resin with extensive space structural heritage*. M74 is formulated for autoclave processing, but it has been successfully processed by press molding. Unidirectional tape and woven fabric impregnated with M74 resin will retain good tack and drape for at least 10 days at 70°F (21°C). Standard cure is for two hours at 350°F (177°C). Hexcel recommended lay-up procedure is HSP-L1 or HSP-L2. Recommended cure procedure is HSP-C1 or HSP-C2.
HexTow® IMA
Applications:
Equipment & Parts, Renewable Energy, Refining & Gas Processing
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Tanks
HexTow® IMA carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in prepregging. The unique properties of HexTow® IMA fiber, such as higher tensile strength and modulus, as well as good shear strength, allow structural designers to achieve both higher safety margins for both stiffness and strength critical applications.
HexTow® AS4A
Applications:
Equipment & Parts, Renewable Energy, Refining & Gas Processing
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Tanks
HexTow® AS4A carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties, and is suggested for use in prepregging, filament winding, braiding, and pultrusion.
HexTow® AS7 (Industrial)
Applications:
Equipment & Parts, Renewable Energy, Refining & Gas Processing
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Tanks
HexTow® AS7 carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties, and is suggested for use in weaving, prepregging, filament winding, braiding, and pultrusion. AS7-GS 12k (0.5%) carbon fiber has been qualified to NMS 818 Carbon Fiber Specification (NCAMP). This allows customers to call out an industry standard, aerospace grade carbon fiber without the need to write and maintain their own specification. HexTow® AS7 is International Monohull Open Class Association (IMOCA) certified/qualified.
HexPly® F515
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing
HexPly® F515 is an advanced, industrial grade, modified epoxy formulation designed for either vacuum bag or autoclave curing to offer very high laminate strengths, coupled with increased fracture toughness. HexPly® F515 has a 250°F (121°C) cure.
HexTow® AS4C (Industrial)
Applications:
Equipment & Parts, Renewable Energy, Refining & Gas Processing
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Tanks
HexTow® AS4C carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 3,000 (3K), 6,000 (6K) and 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties, and is suggested for use in weaving, prepregging, filament winding, braiding, and pultrusion.
HexPly® F185
Polymer Name:
Epoxy Resins & Compounds
Functions:
Prepreg
Processing Methods:
Prepreg Processing
HexPly® F185™ is an advanced epoxy formulation designed for autoclave curing to offer very high sandwich and metal bonding strengths with moderate laminate strengths. HexPly® F185™ is a structural adhesive and cocuring grade epoxy resin with a 250°F (121°C) cure. This system offers the highest available fracture toughness and strain to failure of the 250°F (121°C) cure resins.
HexTow® IM8
Applications:
Equipment & Parts, Renewable Energy, Refining & Gas Processing
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Tanks
HexTow® IM8 carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in prepregging, filament winding, braiding, and pultrusion where additional strength and modulus are required over IM7.
HexPly® 954-6
Polymer Name:
Cyanate Ester Resin
Functions:
Prepreg
Processing Methods:
Prepreg Processing
HexPly® 954-6 is a 250ºF (121ºC) curing toughened cyanate resin with 300ºF (149ºC) Tg. HexPly® 954-6 is formulated for autoclave curing. Recommended cure is three hours at 250 F (121ºC). Service temperatures are maximized by a post cure of 350ºF - 450ºF (177ºC - 205ºC). The recommended lay-up procedure is HSP-L3. The recommended cure procedure is HSP-C4. Typical applications for HexPly® 954-6 include space structures, such as solar arrays, antennae and support structures, or any application where impact resistance, light weight, excellent dielectric and low outgassing properties are required. HexPly® 954-6 can be impregnated on all available fibers and fabrics.
HexTow® PV42/850
Applications:
Equipment & Parts, Renewable Energy, Refining & Gas Processing
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
End Uses:
Tanks
HexTow® PV42/850 carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in prepregging, filament winding, braiding, and pultrusion. The unique properties of HexTow® PV42/850 fiber, such as higher tensile strength and modulus, as well as good shear strength, allow structural designers to achieve both higher safety margins for both stiffness and strength critical applications.