Company logo
product
EPON™ Resin EPON™ Resin 8111
Search:

EPON™ Resin EPON™ Resin 8111

EPON™ Resin 8111 is a low viscosity resin displaying exceptionally rapid reaction rates with aliphatic amine curing agents over a broad temperature range while providing performance levels roughly equivalent to basic liquid epoxy resins. This unique feature suggests the use of EPON Resin 8111 in rapid set adhesives and patching compounds capable of satisfactory use at application temperatures to 0 °C..Aliphatic amine cured EPON Resin 8111 systems are characterized by hard, tough cures exhibiting mechanical, electrical, and water resistance properties similar to those normally expected from conventional liquid epoxy resins..Good wetting characteristics, strong bonding to various substrates, and a reduced tendency to form amine carbonate in thin film applications suggest the use of EPON Resin 8111 in various high build coating applications such as two-component spray applied traffic striping, wear resistant surfacing and clear sealers.
Product Resources

Knowde Enhanced TDS

Expand All

+

Identification & Functionality

+

Features & Benefits

+
General Information

EPON Resin 8111 is a highly reactive multifunctional resin containing both epoxide groups and reactive unsaturation. Unlike conventional epoxy resins, polymerization can occur under certain conditions. The temperature of EPON Resin 8111 should not exceed 50 °C during storage, mixing or grinding operations.

The use of typical epoxy diluents or alkaline fillers with EPON Resin 8111 may also result in polymerization. Therefore, it is important that any modifier be carefully screened prior to commercial use with EPON Resin 8111.

For applications requiring further viscosity reductions and/or flexibility, the addition of EPON Resin 8021 is suggested. EPON Resin 828 is also compatible with EPON Resin 8111.

The viscosity of EPON Resin 8111 is lower than that of unmodified bisphenol A liquid resins. (Because of its low viscosity, reactive diluents are not necessary for most applications

Applications & Uses

+

Properties

+
Physical Form

Packaging & Availability

+
Packaging Type
Packaging

Available in bulk and drum quantities

Storage & Handling

+
Storage and Handling

EPON Resin 8111 should be stored in tightly sealed glass, stainless steel or phenolic line containers at normal room temperatures. Storage in unlined steel containers should be avoided. Care should be taken to avoid storage of this resin above 50 °C.

Prolonged storage of EPON Resin 8111 at temperatures below -10 °C can result in resin crystallization. Should this occur, gentle warming to normal ambient temperatures will restore this resin to its original homogeneous state.

Exposure to these materials should be minimized and avoided, if feasible, through the observance of proper precautions, use of appropriate engineering controls and proper personal protective clothing and equipment, and adherence to proper handling procedures. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheet (MSDS) for these and all other products being used are understood by all persons who will work with them

Most Viewed Documents

View All 2 Documents

Document Name
Type
Products
Learn More
EPON™ Resin 8111 Technical Data Sheet
Technical Data Sheet
EPON™ Resin EPON™ Resin 8111
Technical Data Sheet
Products: EPON™ Resin EPON™ Resin 8111
EPON™ Resin 8111 Shelflife Data Sheet
Other
EPON™ Resin EPON™ Resin 8111
Other
Products: EPON™ Resin EPON™ Resin 8111
Product Page Index
0-9
a
b
c
d
e
i
l
p
w