Knowde Enhanced TDS
Identification & Functionality+
Features & Benefits+
- Low viscosity
- Low color
- Low ionic contamination
- Reacts with a full range of curing agents
- Produces high-strength cured systems resistant to chemical attack
Applications & Uses+
- Fiber reinforced pipe and composites
- Tooling and molding compounds
- Construction, electrical and aerospace adhesives
- Electrical castings and laminates
- Chemical resistant high solids tank linings
- Grouting compounds
The low viscosity and curing properties of EPON Resin 826 allow its use under various conditions and fabrication techniques. These include EPON Resin 826 can be crosslinked with a variety of curing agents/depending on processing conditions and properties desired for the finished product. A guide to selecting curing agents for combination with EPON Resin 826 for various applications given in technical bulletin SC:235- 01.828. EPON 826 is commonly used to fabricate high strength fiber reinforced pipes and composites. The low viscosity of the resin provides rapid wetout of a wide range of reinforcing fibers including glass, graphite, aramid and boron. High fiber content with low void content can be achieved with this resin. Structural composites such as this have a high ratio of strength to weight. This makes them suitable for applications ranging from sporting goods equipment to aerospace structural members. EPON Resin 826 systems are also excellent electrical insulators. Such systems are used frequently in electrical encapsulations, laminates and molding compounds. Structures, linings and coatings made with EPON Resin 826 protect metal surfaces and resist attack from acids, bases, solvents and fuel. They find use in the oil, gas, mining and chemical industries. The higher shear strength obtained with EPON Resin 826 adhesives is due in part to the low internal stresses inherent in cured epoxy resins. Such adhesives are used to bond a broad range of substrates.
Packaging & Availability+
Available in bulk and drum quantities.
Storage & Handling+
EPON Resin 826 may occasionally crystalize, this is evident by the products visual appearance that can range from a hazy liquid to a waxy semisolid. Resin that has crystallized can be reconstituted by gentle warming of the entire container and its contents to approximately 120-140 °F until all visual evidence of crystallization has gone away.
Exposure to these materials should be minimized and avoided, if feasible, through the observance of proper precautions, use of appropriate engineering controls and proper personal protective clothing and equipment, and adherence to proper handling procedures. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheet (MSDS) for these and all other products being used are understood by all persons who will work with them