Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Characteristics
- Available for all RAL colors.
- One coat finishes.
- Very Good UV resistance.
- Suitable for most exterior environments.
- Less waste and pollution to the environment.
- TGIC free.
- 10 year guaranteed performance on correctly pre-treated aluminum with Qualicoat (smooth surfaces: P-0582; structure and silk pattern: P-1566) and GSB (smooth surfaces:274-A; structure and silk pattern:274-C) approval.
Applications & Uses
- Applications
- Application Method
- Applications
- Window and door systems
- Dish antenna
- Garden tools
- Architectural applications
- Application Data
- Application Corona/Tribo (Can be applied by tribo guns if product code has “T” for the 6th character).
- Curing - 180°C, 10 minutes recommended.
Metal Temperature (°C) Time (minutes) 170 15 - 25 180 8 - 18 190 5 - 14 - Theoretical cons. 8-10 m2/kg. Practical spreading rates will vary due to such factors as method and conditions of application, specific gravity, surface profile and texture.
- Application Guide
Surface Preparation:
All surfaces should be degreased and pretreated for optimal performance. Suitable pretreatment includes:
- Aluminum Yellow chromate or green chromate/phosphate
- Ferrous metals Zinc phosphate or Iron phosphate
- Zinc Coated Metals Zinc phosphate or chromate
Application Procedure and Equipment:
- PE58 series powder coatings charging properties are optimized when powder is free-flowing and moisture-free. Aged or compacted powder may require preconditioning for several minutes to fluidise evenly.
- If storage room temperature is lower than the application area, powder coatings, which are hygroscopic, should be acclimated in unopened containers prior to adding into the spray hopper. For optimum performance, It should be applied and stored at air-conditioning area. Storage temperatures should be kept below 30 °C.
- Powder should not be stored in hoppers for long periods of time. If moisture condensation occurs, fluidize powder to dry-out or replace moisture-laden powder with virgin powder.
- Powder coatings are finely ground particulates. Respirators or dust masks should be used by workers exposed to powder in order to avoid dust inhalation.
- Compressed air to the gun must be oil and moisture free.
- Silicone should not be used in application area.
- For box feeders, ensure probe is fully inserted in powder and operated as per manufacturer’s recommendations.
- Contact points should be maintained to ensure metal-to-metal ground.
- Apply by electrostatic spray. Relative humidity should be 50-60% for corona system, lower than 40% for tribo system.
- Cure as per recommendations outlined above.
- Reclaim-to-virgin ratios should be carefully monitored to maintain spray consistency.
- Sieving powder before adding to hopper eliminates potential clumping or foreign matter.
- Test for cure of the coating by impact test.
- Care and Maintenance
- PE58 should be regularly washed with warm water and mild liquid detergent, followed by a fresh water rinse to maintain the attractive appearance of the powder cured film.
- The use of abrasive cleaners is not recommended, nor is the use of active organic solvents.
- Precautions and Limitations
- As a result of possible wide application variations and stoving conditions, PE58 may show variation, between İBA Kimya Powder Coatings prepared samples and production applied material. Therefore, it is the applicator and/or their customer’s responsibility to ensure the product conforms to their requirements.
- For optimum performance ensures recommended dry film thickness is obtained.
- Not recommended for use in highly corrosive environments.
Properties
- Typical Properties
- Product Properties
- UV Resistance - Very good UV resistance. Qualicoat (smooth surfaces: P-0582; structure and silk pattern: P-1566) and GSB (smooth surfaces:274-A; structure and silk pattern:274-C) approved.
- Flow out - Very good
- Surface
- Gloss GL
- Semigloss HR
- Structure ST
- Silk Pattern SP
| Value | Units | Test Method / Conditions | |
| Specific Gravity (Low with Dark Colours, High with Light Colours) | 1.5 - 1.8 | gr/cm³ | — |
| Film Thickness (Recommended) | 60 - 80 | μm | — |
Safety & Health
- Health and Safety
- The SDS is an integral part of using this product as it contains information on the potential health effect of exposure, personal protective equipment needed. It is recommended to contact to Sales and Customer Service Offices for further information.
Packaging & Availability
- Packaging Type
Storage & Handling
- Shelf Life
- 24 months (max. 30°C and max. 50% RH)
- Transport and Storage
- Packaging - 15-20-25 kgs. Heavy polyethylene bag in a corrugated carton
- Shipment - Not dangerous goods. No special transport requirements.
- Storage Conditions - Storage temperatures should be kept below 30°C and 50% relative humidity. Powder should be stored in closed containers.