Ferrnsol Rubber and Elastomer Lubricants - RTU are specially formulated water-based lubricants that reduce friction on applied surfaces and trap debris for easy removal. It reduces drag and wear on cutting machinery, extending the life expectancy of dies. This product will not cause softening or swelling of rubber materials and is safe for use on most surfaces, such as metal, plastic, and rubber. Multiple versions of this product are available.
Ask JTM Products Questions
Ask the Supplier
Popular JTM Products ProductsView All JTM Products Products
Knowde Enhanced TDS
Identification & Functionality
Ferrnsol Specialty Lubricants Rubber and Elastomer Lubricants - RTU Features & Benefits
Applications & Uses
- Leak detection
- Form release agent
- Excellent choice for use in spray equipment
|Recommended Dilution Rate w/ Clean Potable Water|
|4:1||Light Lubrication/ Leak Detection|
For active cutting applications:
Dilute Rubber and Elastomer Lubricant 1:1 with water and apply to surface.
For general lubrication:
Dilute one part Rubber and Elastomer Lubricant to two parts water.
For leak detection:
Dilute 1 part Rubber and Elastomer lubricant to four parts water.
These are recommendations only; depending on application, dilution rate may vary.
|Value||Units||Test Method / Conditions|
|Melting / Freezing Point||approx. 20||°F||-|
|Boiling Point||approx. 180||˚F||-|
Regulatory & Compliance
Safety & Health
Storage & Handling
Store in tightly sealed containers in a cool, dry area away from direct sunlight and sources of heat. Shelf life of properly stored material is one year from date of manufacture.