Company logo

Products

JTM Products
Ready-to-Use Products
Product Families
Fluids & Lubricants
Cleaners
Paints & Coatings
27 products found on JTM Products in Ready-to-Use Products .
With TDS
With SDS
Phoenix 713-a product card banner

JTM Products

Phoenix 713-A

Ready to Use Product Type: Lubricant

Application Area: Pipes, Potable Water Applications, Pipe Fittings, Gaskets

Compatible Substrates & Surfaces: Metal, Elastomers & Rubbers, Concrete, Plastics

Features: Biodegradable, Bacteria Resistant, Wide Temperature Operating Range, Excellent Lubricity, Non-Toxic

Chemical Family: Vegetable Oils

Phoenix 713-A is a pipe joint lubricant that is a soft, non-water-dispersible paste. It is a stable blend of vegetable oils, soaps, surfactants, and mineral fillers. The mating of abutting pipes forces the paste into the cavity, thus providing the needed lubrication to complete the coupling and seal the joint. Phoenix 713-A is a lubricant that does not dry out when gaskets are stored in a sealed container. It is certified to meet NSF/ANSI Standard 61 requirements for use in potable water systems. JTM Products uses strict analytical standards and formulation consistency to assure consistent production of a safe, high-quality lubricant for water pipe joining needs.

Phoenix Ease-on product card banner

JTM Products

Phoenix EASE-ON

Ready to Use Product Type: Lubricant

Application Area: Pipes, Potable Water Applications, Pipe Fittings, Gaskets

Compatible Substrates & Surfaces: Metal, Elastomers & Rubbers, Concrete, Plastics

Features: Biodegradable, Bacteria Resistant, Wide Temperature Operating Range, FBC™ System Compatible, Water Soluble, Excellent Lubricity, Non-Toxic

Chemical Family: Vegetable Oils

Phoenix EASE-ON effectively lubricates pipes and pipe gaskets for safe and efficient assembly of all types of pipelines, especially potable water pipelines. Ease-On utilizes environmentally friendly raw materials common in the soap and lubricant industries. It will not irritate the hands and is not hazardous. This product can be cleaned with warm water and soap. Ease-On is certified to meet NSF/ANSI Standard 61 for potable water pipelines. Made without petroleum, Ease-On will not swell gaskets.

Murphy’s Black Tire Paint product card banner

JTM Products

Murphy’s Black Tire Paint

Ready to Use Product Type: Waterborne Coating, Top Coat

Features: High Productivity, Fast Drying, Cost Effective, Good Hiding Power, Matte Finish

Application Area: Tire, Brush

Compatible Substrates & Surfaces: Elastomers & Rubbers

Application Method: Wipe, Spray

Murphy's Black Tire Paint is the ideal finishing solution for retread tires. It transforms dirty, worn-out tires into ones with a like-new appearance. It has a quick-drying formula that provides excellent hiding power and enhances your productivity. Choose Murphy's Black Tire Paint for better coverage in fewer coats and to save time and money.

Phoenix 505 product card banner

JTM Products

Phoenix 505

Ready to Use Product Type: Lubricant

Application Area: Pipes, Potable Water Applications, Pipe Fittings, Gaskets

Compatible Substrates & Surfaces: Metal, Elastomers & Rubbers, Concrete, Plastics

Features: Biodegradable, Bacteria Resistant, Water Soluble, Excellent Lubricity, Non-Toxic

Chemical Family: Vegetable Oils

Phoenix 505 is a pipejoint lubricant that is a soft, water-soluble paste. It is a stable blend of vegetable oil soaps and water and is certified by NSF for use in potable water systems, meeting NSF/ANSI Standard 61. Phoenix 505 has been tested and found to be safe for use on most common gasket materials.

Phoenix 28-b product card banner

JTM Products

Phoenix 28-B

Ready to Use Product Type: Lubricant

Application Area: Pipes, Pipe Fittings, Gaskets

Compatible Substrates & Surfaces: Metal, Elastomers & Rubbers, Concrete, Plastics

Features: Biodegradable, Bacteria Resistant, Wide Temperature Operating Range, Water Soluble, Excellent Lubricity, Non-Toxic

Chemical Family: Vegetable Oils

Phoenix 28-B effectively lubricates pipes and pipe gaskets for safe and efficient assembly of all pipes except potable water pipelines. Phoenix 28-B is a soft, non-water-dispersible paste that is a stable blend of vegetable oil, soaps, and surfactants. It is excellent for non-potable wet or underground pipe assembly.

Murphy’s Liquid Tire & Tube Mounting Compound product card banner

JTM Products

Murphy’s Liquid Tire & Tube Mounting Compound

Ready to Use Product Type: Lubricant

Application Area: Wheel, Car Rims, Mounting Applications, Tire, Tubes

Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal

Features: Corrosion Resistant, Cleanable

Chemical Family: Vegetable Oils

Murphy's Liquid Tire & Tube Mounting Compound is a ready-to-use, soap-based lubricant that makes tire and tube mounting easy. It is non-toxic, easy to clean, and fortified with rust inhibitors to protect against wheel corrosion. It is suitable for use with all types of wheels and provides a smooth, hassle-free application.

Murphy’s Non-rust Rim-kote Tire Mounting Lubricant product card banner

JTM Products

Murphy’s Non-Rust Rim-Kote Tire Mounting Lubricant

Ready to Use Product Type: Lubricant

Application Area: Car Rims, Mounting Applications, Tire, Tubes

Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal

Features: Corrosion Resistant, Low VOC, Odorless, Freeze Resistant

Chemical Family: Vegetable Oils

Murphy's Non-Rust Rim-Kote Tire Mounting Lubricant is a soft, non-water dispersible paste and is a stable blend of vegetable oil, soaps, surfactants, mineral fillers and water. It prevents tire bead freezing and helps seat tubeless tires in sub-freezing temperatures. It is the mounting lubricant of choice for mounting large trucks and is safe for use on most common rubber materials.

Phoenix 27-xl product card banner

JTM Products

Phoenix 27-XL

Ready to Use Product Type: Lubricant

Application Area: Pipes, Potable Water Applications, Pipe Fittings, Gaskets

Compatible Substrates & Surfaces: Metal, Elastomers & Rubbers, Concrete, Plastics

Features: Biodegradable, Dispersible, Bacteria Resistant, Wide Temperature Operating Range, FBC™ System Compatible, Water Soluble, Excellent Lubricity, Low VOC, Non-Toxic

Chemical Family: Vegetable Oils

Phoenix 27-XL effectively lubricates pipes and pipe gaskets for safe and efficient assembly of all types of pipelines, especially potable water pipelines. Phoenix 27-XL utilizes environmentally friendly raw materials common in the soap and lubricant industries. It will not irritate the hands and is not hazardous. This product can be cleaned with warm water and soap. Phoenix 27-XL is certified to meet NSF/ANSI Standard 61 for potable water pipelines. Made without petroleum, the Phoenix 27-XL will not swell gaskets.

Murphy’s Concentrated Extra Slippery Tire And Tube Mounting Compound product card banner

JTM Products

Murphy’s Concentrated Extra Slippery Tire and Tube Mounting Compound

Ready to Use Product Type: Lubricant

Application Area: Car Rims, Mounting Applications, Tire, Tubes

Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal

Features: Corrosion Resistant, Non-Toxic, Low Slip, Dilutable

Murphy's Concentrated Extra Slippery Tire & Tube Mounting Compound is a blend of natural polymers, surfactants, corrosion inhibitors, stabilizers, and water that can be used in any application where rubber needs to be lubricated relative to its dry state. It provides low friction to prevent twisting and cracking, and will not cause softening or swelling of most rubber materials. It dries to a low-slip residue that helps prevent slippage under high loads and high torque.

Murphy’s Slix Black Lube product card banner

JTM Products

Murphy’s Slix Black Lube

Ready to Use Product Type: Lubricant

Application Area: Car Rims, Mounting Applications, Tire, Tubes

Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal

Features: Corrosion Resistant, Non-Toxic

Chemical Family: Vegetable Oils

Murphy's Slix Black Lube is a soft, non-water dispersible paste blend of vegetable oil, soaps, surfactants, and water that is safe for use on most common rubber materials and excellent for use in all types of tire mounting systems. It prevents the bonding or freezing of tire beads to tire rims and allows for easy, damage free removal of tires, making it ideal for all-terrain and large commercial tires.

Murphy’s Tire Mounting White Paste product card banner

JTM Products

Murphy’s Tire Mounting White Paste

Chemical Family: Vegetable Oils

Ready to Use Product Type: Lubricant

Color: White

Application Area: Tire, Tubes, Mounting Applications, Car Rims

Application Method: Brush, Swab

Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal

Murphy's Tire Mounting White Paste is formulated for use in the most challenging applications and is available in regular and low-profile containers for use in all types of tire mounting machines. It provides low friction to prevent twisting and cracking and does not soften or swell tires or rubber tubes. It contains no harsh chemical components that can be corrosive to metals.

Murphy’s Concentrated Tire And Tube Mounting Compound product card banner

JTM Products

Murphy’s Concentrated Tire and Tube Mounting Compound

Ready to Use Product Type: Lubricant

Application Area: Car Rims, Tire, Tubes, Wheel, Mounting Applications

Compatible Substrates & Surfaces: Metal, Elastomers & Rubbers

Features: High Performance, Corrosion Resistant, Cost Effective, Good Adhesion, Biodegradable, Cleanable, Dilutable, General Purpose, Non-Toxic, Thickening

Chemical Family: Vegetable Oils

Murphy's Concentrated Tire & Tube Mounting Compound is a ready-to-use paste for easy application that can be diluted with water for extra savings. It is soap-based, easy to clean up, non-toxic, and fortified with rust inhibitors for protection against wheel corrosion. It is designed to assist in mounting rubber tires and tubes on all types of wheels. This mild formula is worker-friendly, has a consistent color, viscosity, aroma, and performance, and is thicker, clearer, and extremely consistent, unlike inferior products.

Ferrnsol Wire Cleaner product card banner

JTM Products

Ferrnsol Wire Cleaner

Ready-to-Use Product Type: Cleaner, Degreasers

Application Area: Equipment, Wires

Compatible Substrates & Surfaces: Copper, Aluminum, Metal, Steel

Chemical Family: Mixtures & Blends

Features: Excellent Lubricity, High Dilutability, Water-based, Degreasing

Ferrnsol Wire Cleaner is a concentrated cleaner and degreaser for use after or during the final steps of the wire drawing process. It is made from biodegradable surfactants that easily remove the residual film of lubricant on wire surfaces. It can be used on both ferrous and non-ferrous metals.

Ferrnsol All-purpose Cleaner - Unscented product card banner

JTM Products

Ferrnsol All-Purpose Cleaner - Unscented

Chemical Family: Vegetable Oils

Ready-to-Use Product Type: Cleaner, Multipurpose Cleaners, Industrial Cleaners

Labeling Claims: Environmentally Friendly, From Renewable Resources, Phosphate-free, Silicon-free, Not Listed In California Proposition 65, Biodegradable, Non-Toxic, Solvent-free, Petroleum-free

Application Area: Equipment, Floor, Wall

Ferrnsol All-Purpose Cleaner - Unscented is environmentally friendly as it is made from renewable vegetable oils. This soap is designed to clean surfaces such as metal, plastic, rubber, etc. Its ability to emulsify oils like grease, tar, dirt, and wax makes it an ideal choice for industrial use.

Ferrnsol All-purpose Cleaner - Pine Scented product card banner

JTM Products

Ferrnsol All-Purpose Cleaner - Pine Scented

Chemical Family: Vegetable Oils

Ready-to-Use Product Type: Cleaner, Multipurpose Cleaners, Industrial Cleaners

Labeling Claims: Environmentally Friendly, From Renewable Resources, Phosphate-free, Silicon-free, Not Listed In California Proposition 65, Biodegradable, Non-Toxic, Solvent-free, Petroleum-free

Application Area: Equipment, Floor, Wall

Ferrnsol All-Purpose Cleaner - Pine Scented is environmentally friendly as it is made from renewable vegetable oils. This soap is designed to clean surfaces such as metal, plastic, rubber, etc. Its ability to emulsify oils like grease, tar, dirt, and wax makes it an ideal choice for industrial use.

Ferrnsol 540 Natural Base Soap product card banner

JTM Products

Ferrnsol 540 Natural Base Soap

Function: Soap Bases

Chemical Family: Vegetable Oils

Ready-to-Use Product Type: Cleaner

Ingredient Origin: Vegetable Origin, Plant Origin, Natural Origin

Labeling Claims: Environmentally Friendly, Natural, Silicon-free, Naturally Derived, Fragrance-free, Biocides-free, Sulfate-free, Plant-Based, Not Listed In California Proposition 65, Biodegradable, Petroleum-free, Phosphate-free, Silicone-free, From Renewable Resources, Vegan, Non-Toxic, Sustainable, Solvent-free

Ferrnsol 540 Natural Base Soap is an all-natural, highly concentrated liquid soap that is made from a blend of coconut, olive, and tree oils. This unique oil blend helps create a beautiful castile soap that offers a wonderful lather with highly effective cleaning capabilities. It does not contain any fragrances or perfumes, making it fully customizable to the end user’s liking.

Ferrnsol Concentrated Gel Soap product card banner

JTM Products

Ferrnsol Concentrated Gel Soap

Function: Soap Bases

Chemical Family: Vegetable Oils

Ready-to-Use Product Type: Cleaner

Ingredient Origin: Vegetable Origin, Plant Origin, Natural Origin

Labeling Claims: Silicon-free, Naturally Derived, Fragrance-free, Biocides-free, Sulfate-free, Plant-Based, Not Listed In California Proposition 65, Biodegradable, Petroleum-free, Phosphate-free, Silicone-free, From Renewable Resources, Vegan, Non-Toxic, Sustainable, Solvent-free, Environmentally Friendly

Ferrnsol Concentrated Gel Soap is made from vegetable oils and all-natural ingredients. It is suitable for use as the base of a body wash or body scrub, where exfoliants, scents, and fragrances can be added. It can also be diluted to a liquid soap state and further customized from there.

Ferrnsol 435 Natural Base Soap product card banner

JTM Products

Ferrnsol 435 Natural Base Soap

Function: Soap Bases

Chemical Family: Vegetable Oils

Ready-to-Use Product Type: Cleaner

Ingredient Origin: Vegetable Origin, Plant Origin, Natural Origin

Labeling Claims: Environmentally Friendly, Natural, Silicon-free, Naturally Derived, Fragrance-free, Biocides-free, Sulfate-free, Plant-Based, Not Listed In California Proposition 65, Biodegradable, Petroleum-free, Phosphate-free, Silicone-free, From Renewable Resources, Vegan, Non-Toxic, Sustainable, Solvent-free

Ferrnsol 435 Natural Base Soap is an all-natural, highly concentrated liquid soap that is made from a blend of coconut, olive, and tree oils. This unique oil blend helps create a beautiful castile soap that offers a wonderful lather with highly effective cleaning capabilities. It does not contain any fragrances or perfumes, making it fully customizable to the end user’s liking.

Skid-daddle product card banner

JTM Products

Skid-Daddle

Ready-to-Use Product Type: Industrial Cleaners, Automotive Cleaners, Cleaner, Multipurpose Cleaners, Degreasers

Application Area: Floor, Concrete Cleaner, Tire Tread Surfaces

Compatible Substrates & Surfaces: Concrete

Chemical Family: Mixtures & Blends

Features: High Dilutability, Neutral pH, Effective Soil Removal, Degreasing

JTM Products - Soaps and Cleaners Skid-Daddle is a specially formulated cleaner. It is designed to remove rubber tire marks from epoxy or other polymer floor coating systems without damaging the floor coating. Skid-Daddle® is a blend of special cleaning agents with a pale yellow color and a fresh citrus fragrance.

Ferrnsol Chain & Conveyor Lubricant - Lt product card banner

JTM Products

Ferrnsol Chain & Conveyor Lubricant - LT

Ready-to-Use Product Type: Lubricant

Application Area: Chain Conveyors, Conveyor Chains, Rollers, Industrial Conveyors, Chains, Belts, Brush

Compatible Substrates & Surfaces: Metal, Steel, Elastomers & Rubbers, Plastics

Features: Biodegradable, Non-Toxic, Wear Resistant

Chemical Family: Vegetable Oils

Ferrnsol Chain & Conveyor Lubricant - LT is designed to leave a thin film to protect against wear and tear on conveyors, belts, rollers, or chains while providing continuous lubrication at temperatures below the freezing point. This product is an excellent choice for use in automatic spray equipment.

Ferrnsol Form Release Agent product card banner

JTM Products

Ferrnsol Form Release Agent

Ready-to-Use Product Type: Lubricant

Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal, Wood, Plastics

Features: Water Soluble, Low Viscosity, Non-Toxic, Biodegradable

Chemical Family: Vegetable Oils

Ferrnsol Form Release Agent is a water-soluble lubricant made from a blend of biodegradable soaps. It is designed to lubricate and reduce the surface tension of the form to protect against wear and tear. It can be used in both wet and dry applications and on multiple surfaces, such as metal, plastic, rubber, or wood.

Ferrnsol Rubber And Elastomer Lubricants- Ci product card banner

JTM Products

Ferrnsol Rubber and Elastomer Lubricants- CI

Ready-to-Use Product Type: Cutting Oils, Lubricant, Cutting Fluid

Application Area: Gaskets, Equipment

Compatible Substrates & Surfaces: Plastics, Elastomers & Rubbers, Metal

Features: Corrosion Resistant, Drag Reduction, Good Release Properties, Non-Toxic, Biodegradable

Chemical Family: Vegetable Oils

Ferrnsol Rubber and Elastomer Lubricants- CI are specially formulated water-based lubricants that reduce friction on applied surfaces and trap debris for easy removal. It reduces drag and wear on cutting machinery, extending the life expectancy of dies. This product will not cause softening or swelling of rubber materials and is safe for use on most surfaces such as metal, plastic, and rubber. Multiple versions of this product are available.

Ferrnsol Rubber And Elastomer Lubricants - Concentrated product card banner

JTM Products

Ferrnsol Rubber and Elastomer Lubricants - Concentrated

Ready-to-Use Product Type: Cutting Oils, Lubricant, Cutting Fluid

Application Area: Gaskets, Equipment

Compatible Substrates & Surfaces: Plastics, Elastomers & Rubbers, Metal

Features: High Dilutability, Drag Reduction, Good Release Properties, Non-Toxic, Biodegradable

Chemical Family: Vegetable Oils

Ferrnsol Rubber and Elastomer Lubricants - Concentrated are specially formulated water-based lubricants that reduce friction on applied surfaces and trap debris for easy removal. It reduces drag and wear on cutting machinery, extending the life expectancy of dies. This product will not cause softening or swelling of rubber materials and is safe for use on most surfaces, such as metal, plastic, and rubber. Multiple versions of this product are available.

 Ferrnsol Forming And Cleaning Paste product card banner

JTM Products

Ferrnsol Forming and Cleaning Paste

Chemical Family: Vegetable Oils

Ready-to-Use Product Type: Cleaner, Lubricant

Application Area: Equipment

Compatible Substrates & Surfaces: Yellow Metals, Plastics, Copper, Metal, Elastomers & Rubbers, Brass

Features: Corrosion Resistant, Excellent Formability, Excellent Lubricity, Protects Metal Surfaces, Anti Dripping

Ferrnsol Forming and Cleaning Paste is made from renewable vegetable oils for a better working environment. It is specifically designed to clean and lubricate all types of surfaces and equipment. It is formulated to help prevent corrosion on metal equipment. Dilutions are not uncommon when a liquid lubricant is desired.

Ferrnsol Rubber And Elastomer Lubricants - Rtu product card banner

JTM Products

Ferrnsol Rubber and Elastomer Lubricants - RTU

Ready-to-Use Product Type: Cutting Fluid, Cutting Oils, Lubricant

Application Area: Gaskets, Equipment

Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal, Plastics

Features: Drag Reduction, Good Release Properties, Non-Toxic, Biodegradable

Chemical Family: Vegetable Oils

Ferrnsol Rubber and Elastomer Lubricants - RTU are specially formulated water-based lubricants that reduce friction on applied surfaces and trap debris for easy removal. It reduces drag and wear on cutting machinery, extending the life expectancy of dies. This product will not cause softening or swelling of rubber materials and is safe for use on most surfaces, such as metal, plastic, and rubber. Multiple versions of this product are available.

Ferrnsol Welding Anti-spatter product card banner

JTM Products

Ferrnsol Welding Anti-Spatter

Ready-to-Use Product Type: Anti-Spatter Coating, Lubricant

Application Area: Weld Spatter

Application Method: Spray, Brush, Wipe

Compatible Substrates & Surfaces: Steel, Metal

Features: Minimizes Downtime, Spatter Resistant

Ferrnsol Welding Anti-Spatter is a water-based formula that is designed to prevent the adhesion of welding spatter. This product provides a protective coating to help with the removal of weld spatter and helps keep welding tips and nozzles clean.

Ferrnsol Chain & Conveyor Lubricant product card banner

JTM Products

Ferrnsol Chain & Conveyor Lubricant

Ready-to-Use Product Type: Lubricant

Application Area: Chain Conveyors, Conveyor Chains, Rollers, Industrial Conveyors, Chains, Belts, Brush

Compatible Substrates & Surfaces: Metal, Steel, Elastomers & Rubbers, Plastics

Features: High Dilutability, Biodegradable, Non-Toxic, Wear Resistant

Chemical Family: Vegetable Oils

Ferrnsol Chain & Conveyor Lubricant is a concentrated, soap-based lubricant designed to leave a thin film to protect against wear and tear on conveyors, belts, rollers, or chains while providing continuous lubrication. This product is an excellent choice for use in automatic spray equipment.