Company logo

Products

KaMin LLC
CASE Ingredients
Product Families
Additives
19 products found on KaMin LLC in CASE Ingredients .
With SDS
With TDS
Polygloss® 90 product card banner

KaMin LLC

Polygloss® 90

Functions: Filler

Chemical Family: Kaolins, Cellulose & Cellulosics

End Uses: Waterborne Coating, Gelcoat, Screen Printing Ink, Waterborne Ink

Particle Size: 0.4 - 0.4 microns

Oil Absorption: 42.0 - 42.0 g/100 g

Ultrafine, highly pulverized, premium brightness kaolin for extending high gloss solvent and water-based coatings.

Kamin® 70c product card banner

KaMin LLC

KaMin® 70C

Functions: Filler

Chemical Family: Kaolins, Cellulose & Cellulosics

End Uses: Solventborne Sealant, Waterborne Coating, Gelcoat, Top Coat, Solventborne Coating, Solventborne Adhesive

Particle Size: 3.2 - 3.2 microns

Oil Absorption: 54.0 - 54.0 g/100 g

High brightness, work-horse calcined kaolin clay, extremely low crystalline silica content.

Kamin® 2000c product card banner

KaMin LLC

KaMin® 2000C

Functions: Filler

Chemical Family: Carbonates, Calcium Salts, Kaolins

Particle Size: 1.5 - 1.5 microns

Oil Absorption: 65.0 - 65.0 g/100 g

Highest brightness, smallest particle size, calcined kaolin clay, more cost -effective Ti02 extender than KaMin® 70C.

Kamin® Tek 2001 product card banner

KaMin LLC

KaMin® Tek 2001

Functions: Filler

Chemical Family: Kaolins, Cellulose & Cellulosics

End Uses: Waterborne Coating, Epoxy Coating

Compatible Polymers & Resins: Epoxies (EP)

Particle Size: 0.62 - 0.62 microns

Oil Absorption: 34.0 - 34.0 g/100 g

The uniform, narrow particle size distribution and excellent color makes Kamin® TEK 2001 the preferred extender for gloss latex paints where optimum TiO2 spacing is desired without adverse effect on gloss.

Kamin® 35 product card banner

KaMin LLC

KaMin® 35

Functions: Filler

Chemical Family: Kaolins, Calcium Salts

End Uses: Waterborne Coating, Gelcoat, Top Coat, Solventborne Coating

Particle Size: 7.0 - 7.0 microns

Oil Absorption: 27.0 - 27.0 g/100 g

Coarse kaolin, milled powder, with the lowest oil absorption, for extending without thickening.

Kamin® 80 product card banner

KaMin LLC

KaMin® 80

Functions: Filler

Chemical Family: Kaolins, Cellulose & Cellulosics

End Uses: Solventless & High Solids Coating, Epoxy Coating, Top Coat, Waterborne Sealant, Solventborne Adhesive, Waterborne Ink, Solvent Free (100% Solids) Adhesive, Offset Ink, Waterborne Coating, Flexography Ink, Solventborne Coating, Solventborne Ink

Compatible Polymers & Resins: Epoxies (EP)

Particle Size: 2.5 - 2.5 microns

Oil Absorption: 42.0 - 42.0 g/100 g

KaMin® 80 is an economical, general purpose water-washed kaolin, with intermediate brightness. It is suitable for use in water-borne, solvent-borne and solvent-free paint, ink, and adhesive applications.

Kamin® Hg product card banner

KaMin LLC

KaMin® HG

Functions: Filler

Chemical Family: Kaolins, Cellulose & Cellulosics

End Uses: Waterborne Coating, Flexography Ink, Gelcoat, Waterborne Ink

Particle Size: 0.5 - 0.5 microns

Oil Absorption: 33.0 - 33.0 g/100 g

KaMin® HG is an economical, general purpose, water-washed kaolin with fine particle size and intermediate brightness. It is suitable for water borne paint, ink and adhesive applications.

Kamin® Hg90 product card banner

KaMin LLC

KaMin® HG90

Functions: Filler

Chemical Family: Kaolins, Cellulose & Cellulosics

End Uses: Offset Ink, Waterborne Coating, Gelcoat, Waterborne Ink

Particle Size: 0.4 - 0.4 microns

Oil Absorption: 42.0 - 42.0 g/100 g

KaMin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, Ti02 extension and gloss in water-based paints. KaMin® HG90 is ideally suited for water-borne paint and ink applications, where high brightness and whiteness are important.

Lithosperse® 7005cs product card banner

KaMin LLC

Lithosperse® 7005CS

Chemical Family: Kaolins

Functions: Rheology Modifier

Physical Form: Powder, Solid

Synonyms: Porcelain clay, White clay

Lithosperse® 7005 CS is a high performance treated kaolin designed to improve rheology with outstanding dispersibility and resistance to clay bleed in lithographic cold set inks. Lithosperse® 7005 CS has been designed for mix, pump and filter production systems to minimize filter plugging.

Kamin® 35b product card banner

KaMin LLC

KaMin® 35B

Functions: Filler

Chemical Family: Kaolins, Cellulose & Cellulosics

End Uses: Waterborne Coating, Epoxy Coating

Compatible Polymers & Resins: Epoxies (EP)

Particle Size: 4.0 - 4.0 microns

Oil Absorption: 27.0 - 27.0 g/100 g

Coarsest kaolin with the lowest oil absorption, for excellent extension without frosting in water-based coatings. Spray dried bead form.

Polyplate® Hmt product card banner

KaMin LLC

Polyplate® HMT

Functions: Filler

Chemical Family: Kaolins, Silicates

End Uses: Epoxy Coating, Waterborne Coating

Compatible Polymers & Resins: Epoxies (EP)

Polyplate® HMT is a high brightness, very high aspect ratio, delaminated kaolin, intended for use in water-borne coatings, adhesives, and sealants. The large, platy structure of Polyplate® HMT imparts increased hide, tinting strength, enamel holdout, crack resistance, and reinforcement properties in water-based systems.

Kamin® 90b product card banner

KaMin LLC

KaMin® 90B

Functions: Filler

Chemical Family: Kaolins, Cellulose & Cellulosics

End Uses: Waterborne Coating, Gravure Ink, Epoxy Coating, Waterborne Ink

Compatible Polymers & Resins: Epoxies (EP)

Particle Size: 1.5 - 1.5 microns

Oil Absorption: 43.0 - 43.0 g/100 g

KaMin® 90B is a high brightness, fine particle size, general-purpose filler with moderate water demand. KaMin®90B is ideally suited for water-borne applications where high gloss, holdout and controlled rheology are important.

Polyplate® P product card banner

KaMin LLC

Polyplate® P

Functions: Filler

Chemical Family: Kaolins, Mica

End Uses: Waterborne Coating, Gelcoat

Particle Size: 6.7 - 6.7 microns

Oil Absorption: 42.0 - 42.0 g/100 g

Polyplate® P is a high brightness, delaminated clay intended for use in latex paints, water flexography inks, water-based adhesives or water-based systems where increased hiding, tinting strength and improved hold out are desirable.

Kamin® 80b product card banner

KaMin LLC

KaMin® 80B

Functions: Filler

Chemical Family: Kaolins, Cellulose & Cellulosics

End Uses: Solventless & High Solids Coating, Top Coat, Waterborne Sealant, Waterborne Adhesive, Solventborne Adhesive, Waterborne Ink, Solvent Free (100% Solids) Adhesive, Plastisol Coating, Offset Ink, Waterborne Coating, Solventborne Coating, Screen Printing Ink, Solventborne Ink

Particle Size: 2.3 - 2.3 microns

Oil Absorption: 42.0 - 42.0 g/100 g

KaMin® 80B is an economical, general purpose water-washed kaolin, with intermediate brightness. It is suitable for use in water-borne, solvent-borne and solvent-free paint, ink, and adhesive applications.

Kamin® 95 product card banner

KaMin LLC

KaMin® 95

Functions: Filler

Chemical Family: Cellulose & Cellulosics, Kaolins

End Uses: Waterborne Coating, Plastisol Coating

Particle Size: 0.2 - 0.2 microns

Oil Absorption: 40.0 - 40.0 g/100 g

KaMin® 95 is a medium-brightness, kaolin clay filler for paints, adhesives and related industries. It has a neutral pH, is acid-resistant and environmentally friendly.

Polyplate® P01 product card banner

KaMin LLC

Polyplate® P01

Functions: Filler

Chemical Family: Kaolins, Mica

End Uses: Waterborne Coating, Gravure Ink, Epoxy Coating, Top Coat, Solventborne Coating, Waterborne Ink

Compatible Polymers & Resins: Epoxies (EP)

Particle Size: 5.7 - 5.7 microns

Oil Absorption: 42.0 - 42.0 g/100 g

Polyplate® P01 is a milled, high brightness, large particle size delaminated kaolin, intended for use in solvent and water-borne coatings, inks, and adhesives. The high aspect ratio of the large platy particles provides improved tinting strength, enamel holdout, and crack resistance.

Kamin® 90 product card banner

KaMin LLC

KaMin® 90

Functions: Filler

Chemical Family: Kaolins, Cellulose & Cellulosics

End Uses: Top Coat, Waterborne Adhesive, Solventborne Adhesive, Waterborne Ink, Waterborne Coating, Gelcoat, Gravure Ink, Solventborne Coating, Screen Printing Ink, Solventborne Ink

Particle Size: 1.5 - 1.5 microns

Oil Absorption: 43.0 - 43.0 g/100 g

KaMin® 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand. KaMin® 90 is ideally suited for solvent and water-borne paint, ink and adhesive applications where high gloss, holdout and controlled rheology are important.

Lithosperse® Nextgen product card banner

KaMin LLC

Lithosperse® NextGen

Functions: Filler

Chemical Family: Kaolins, Cellulose & Cellulosics

Lithosperse® NextGen is a surface enhanced clay for use in heat-set and sheet-fed inks. It is designed to replace ink resin and ink oil with minimal impact on key ink properties such as ink gloss and ink density.

Kamin® 611 product card banner

KaMin LLC

KaMin® 611

Functions: Filler

Chemical Family: Cellulose & Cellulosics, Kaolins

End Uses: Waterborne Coating, Plastisol Coating

Particle Size: 1.3 - 1.3 microns

Oil Absorption: 40.0 - 40.0 g/100 g

Naturally Delaminated clay for use in water-based paints and coatings.