Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Advantages
- VOC free
- Promotes gloss and adhesion
- Improves leveling of water-based floor coatings
- Dye solvent for enhancing color value
- Facilitates film forming properties
- Anti-skid Agent
- Anti-foam Agent
- No known freezing point
- Particularly effective in conjunction with cationic acrylic resins
Applications & Uses
- Applications
- Application Method
- Compatible Polymers & Resins
- Coating Type
- Ink & Toner Type
- Selective Applications
- Inks (solvent and water based flexo and gravure marking inks)
- Adhesives (polymer)
- Films (PV alcohol)
- Nylon (solid filaments and yarns)
- Lacquers and coatings (solvent and water-based)
- Dye carrier
- Suggested use
- 1-5% based on resin weight
Properties
- Physical Form
- Appearance
- Clear, oily liquid , slight, sweet odor at 100% solids
- Compatible with
- Shellac, Cationic Acrylics, Acrylics, Styrenated Shellac, Acrylated Shellac, Polyvinyal Acetals, Polyvinyal Pyrrolidone, Polyamides, Alkai-Soluble Polymers, Polar-Type Polymers, Low Hyrdolized Polyvinyl, Alcohol (75-77), Natural Resins, Shellac Replacements, Lacquer Resins, Nitrocellulose, Cellulose Acetate, Cellulose Propionate, Cellulose Aceto-Butyrate, Ethyl Cellulose, Zein, Polyvinyl Acetate
- Incompatible with
- Synthetic Microcrystalline Wax, Non-Polar Material, Natural Rubbers, Synthetic Rubbers, Polyethylene (limited), Polyvinyl Chloride, Polystyrene, Ordinary Petroleum Waxes (limited), Starches, Casein, Glue, Vegetable Gums, Cellulose Gums
- Miscible in
- Alcohols, Ketones, Esters, Chlorinated Solvents, Aromatic Solvents
- Partially Miscible In
- Aliphatic Petroleum Hydrocarbons Water (although non dispersible in plain water and non-hygroscopic, it is readily dispersible in aqueous resin solutions or dispersions; also improves compatibility between resins where it acts as a mutual plasticizer)
- Typical Properties
Value | Units | Test Method / Conditions | |
Specific Gravity | 0.97 | — | — |
Cas number | 37281-57-5 | — | — |
Molecular Weight | Approx. 194-202.6 | — | — |
Color | Very pale straw yellow | — | — |
Boiling Point | 285 – 290 (545 – 554) | °C (°F) | — |
Flash Point | 150 | °C | — |
Weight Per Gallon | approx. 9 | lbs | — |
Safety & Health
- Food and Safety
USDA, Food Safety and Quality Service in Washington, reports that Stysolac AW is chemically acceptable as a component of packaging material in direct contact with meat and poultry food products.
Packaging & Availability
- Packaging Type
- Packaging
- 35 lbs. & 450 lb. Drums